Being incapable of controlling whether lens profiles are applied is a problem for a professional. I recently bought a Voightlander 65mm APO Lanthar, a truly superb lens, it has virtually zero distortion. I am using it with the techart Sony E to Nikon Z adapter. The adapter works well enough and the appearance of the image on the viewing screen and viewfinder seems normal, that is there is no distortion.
However when importing either the jpg or RAW file into PS the image comes out with enormous pin cushion distortion vertically. Clearly this is a "correction" imposed by PS as there are no settings on the camera that are being enacted, and again the appearance in the viewfinders are perfect.
ACR does have a profile for this lens, but selecting it or selecting NO profiles does not change the imposed distortion. Imposing a distortion control on a file has the effect of stretching and distorting pixels. That causes a loss of resolution. If I have to use a distortion control to undistort that imposed distortion I am then altering pixels already stretched even more. It is causing a completely unnecessary loss of resolution and image quality. Can you PLEASE allow us to choose whether we want lens profiles to be applied? Maybe separate CA correction from distortion correction.
Moved to Ps forum.
Do you have a sample file? I uses Canon kit , not Nikon, but in ACR I can switch the profile correction separately to CA correction (example below):
Thanks for replying Dave. Having used PS for 28 years I am well aware of all the standard and obvious controls, including ACR. But the distortion profiles for lenses used with Nikon Z can not be turned off or ignored. Enabling or disabling has no effect. And there are no settings in camera to alter that. They effect jpg, and RAW. This is an ACR issue and defeats the benefits of high resolution Nikon Z cameras. Can't imagine the logic of ACR developers.
I downloaded a couple of sample raw files from a nikon Z6 and sure enough was surprised to see a message about the profile being built in to the raw file. Although not mentioning the Z series this gives some more info :
So it looks like a consciously designed "feature" rather than a bug.
There is a running feature request at the link below , to which you may wish to add your own comments. The thread also contains a temporary workaround
When using the original S lenses, the camera will write corrections for distortion and vignetting to the raw file, in a form that Lightroom and Camera Raw understand, and they will be applied automatically
But when using third party lenses, this shouldn't happen.
I have a Nikon Z7 that I use with several non-S lenses, and no corrections are applied for them, but I can do it manually.
Maybe the Techart adapter is causing this behavior.
The screenshot below is for an image taken with the Z7 and a Sigma 14-24mm lens
The Techart adapter is not the issue. I opened the RAW files in Capture One and could manually turn off the distortion control. It made a significant improvement in resolution on the outer areas of the frame as compared to opening the image in ACR. Plus it did NOT crop the image the way ACR did.
It looks like my best option since Adobe won't address what is an issue that both degrades image quality by stretching or distorting pixels and by forcibly cropping your images, is to switch to Capture One and Affinity.
Does the "Setup" rolldown immediately below the profile checkboxes do anything? Just asking (don't have a Nikon Z) - but I don't see it specifically mentioned anywhere.
OK, disregard that, the rolldown plays no part in whether the profile can be disabled or not.
Does Capture One display the same pincushion distortion - is it using the same profile? (aside from the fact that it can be turned off there). Then it has to be the Techart adapter tricking the camera into thinking it's a different lens, and applying the wrong profile.
Why the profile can't be disabled in ACR is in any case the real mystery. I notice Lr/ACR is also using built-in profiles for my Sony/Zeiss lenses on the a7rII, but they can be turned off without problem. There's no built-in profile for my Sigma art 24mm 1.8, so that works the traditional way by enabling it manually.
In other words - exactly the same situation that Per has for his Z7, and no issues.
At first when you open an image in Capture One the image displays the same distortion as it does in ACR. However when you go to the "lens" tab and open up the lens setting you see that it is applying a distortion correction. When you turn that slider down from 100% to 0% all the distortion correction goes with it and you have the lens in it's native state. You also end up with the full dimensions of the image, the edges are not cropped off to allow for the distortion correction. That is how it worked with the 65mm APO Lanthar, a lens that has virtually no distortion.
And regarding my 65mm APO Lanthar, ACR always imposed a grossly distorted correction no matter what combination of setting used.