Copy link to clipboard
When footage is brought into premiere and (unedit/unaltered) is compared side by side with the original file in finder (quicktime) - the image looks to have more contrast as well as more saturation. It exports this way and the file is changed forever.
This is an issue I have known existed since 2018 when I had my iMac Pro. I got rid of that machine and premiere has worked fine on my Macbook Pro since, but now I got my Mac Pro yesterday and got er up and running... guess who came back to play? You guessed it.
What I have tried that worked:
The only thing I can find works is taking the footage and running it through compressor. Then then everything looks and works great. But that is a huge pain and takes up a LOT of storage.
Picture: *Clip on the left is quicktime and the right is the same file sitting in a sequence in premiere.
This seems to happen only with .mp4 footage, but it happened with C200 .mov footage back in 2018. Since testing the last few days, only .mp4 has been the proble.
Footage was captured across several cameras including R6, C200, 1DX MkII, EOS R, and 5D IV
Footage is both 4K and 1080p
Issue persists on Mac Pro (3.2 GHz 16-Core Intel Xeon W - AMD Radeon PRO W6800X 32 GB - 32GB 2933 MHz DDR4) and iMac Pro. I also tried it on another friend's Mac Pro and he had the same issue.
Issue does not persist on Macbook Pro
Weird things to note:
I updated this morning and launched premiere, everything looked fine until the peak files were generated, then the issue presented itself.
The issue was not consistent after update and with new footage. I would scrub through the footage and when I release the cursor the issue would go way for a moment, then return. Almost like the contrast was flashing or being enabled and disabled.
All software is up to date and I have tried in prior versions of premiere.
I have taken the same file and opened in on my Macbook and the issue persists.
I have tried calibrating the display
I have tried different displays
Stuff I don't know about:
I read something that said there’s a bug in Adobe products with a .mp4 video file that has a 0-255 luminance range a 8bit. I feel like some of my footage has been .mov so I don't know if it would hold true and since this issue has been around since 2018 I feel like Adobe should have addressed it by now.
PLEASE GIVE ME SOMETHING TO TRY. I have no idea where to go from here. I will go down whatever rabbit trail you think might help.
Copy link to clipboard
Comparing Quicktime output to Premiere output on the same monitor might not be as revealing as it seems. Read through this thread and see if you find anything that helps:
Copy link to clipboard
Sadly, working video on a Mac has some built-in issues.
There is a standard for virtually all non-HDR video called Rec.709. This standard sets a number of conditions for both the math behind the media encoding and the proper display of that media.
Apple chose not to apply the proper Rec.709 standards for some reason when they went to the Retina monitors by the settings chosen for the ColorSync color management utility native to those Macs with Retinas.
The Rec.709 standards require two mathematical transforms of the image/pixel data from the camera. The first is the scene-referred transform, the second (added as Bt.1886) is the display-referred transform. And a gamma of 2.4 for most evaluation is specified, with an alternate of 2.2 for "bright-room viewing" allowed.
Apple for some reason chose not to apply the Bt.1886 display transform and gamma of the Rec.709 standards.
Instead, they apply what they call "sRGB gamma" of around 1.96 or 1.95, depending on who's measuring it. So the way the Macs with Retinas and ColorSync display Rec.709 video in all applications that allow ColorSync to control color management is improper to begin with.
I work daily with some major colorists. I'm a contributing author on a subscription site for pro colorists to up their game. Most of them work on Macs and use Resolve. And none of them "trusts" their Macs to get CM correct. They would never evaluate an image on a 'basic' Mac screen.
Now ... that's for professional work. I don't know what you do. If you don't need to meet pro broadcast standards, and only worry about what the image looks like on a Mac, that's one thing. If you need proper images that will look good on "proper" color managed systems, that's a whole different kettle of fish.
Premiere Pro is built for bog-standard Rec.709 work, with the assumption CM has been properly handled by the user setting up the physical system. The Program and Reference and Transmit Out "internal" monitors are assumed to be displayed on full Rec.709 calibrated monitors.
On a Mac/Retina system, to get it to work properly with the media is typically using the Preferences option for "display color management" ... which tells PrPro to look at the ICC profile of the monitor and adjust/remap the pixel values displayed to (within the current physical monitor) display the image as close as possible to Rec.709 standards as it can.
But outside PrPro on that Mac, ColorSync will change the image due to the difference in color management settings. It won't appear the same because of that difference. QuickTime player, Chrome and Safari browsers, and most other players will allow QuickTime to contol CM.
My understanding is that on some Macs, VLC player and Firefox browser do not allow Colorsync to control the image. So their image display tends to be closer to what you would see within PrPro than the others.
It also means that those two tend to give a better idea to what non-Mac systems will do with the image. Because there is the same differnce between Mac/Non-Mac as there is within your computer between Quicktime and probably VLC.
You can either make it look like it looks like on your Mac for Macs. You can make it look like you want it across non-Macs and all fully Rec.709 compliant systems. You can't do both, and that sucks.
I will note: what you're seeing of other pro produced media on that Mac has been touched by Colorsync exactly as what it's doing to your media. It didn't look like (originally) what you're seeing.
Now, oddly enough, some of the newer iPads ... if you turn off the auto-image stuff and adjust brightness/saturation correctly ... are some of the best playing devices for checking proper Rec.709 color made. Some colorists I know have stacks of them, setup correctly, that they loan to clients and require all change-requests and approvals for the job come from viewing on those specified iPads.
If I understand what you are saying, the fault may lie in the display and for this I can firmly say that is not the issue as I have used the Retina display with the Mac Pro, attached an LG, and sent the footage to a friend with his own Mac Pro setup. All garnished the same result.
my questions why is it that going through compressor fixes it? Why is is that this issue is not present on my MacBook Pro, only desktop machines.
I don't know what that MacBook Pro does for CM. Older Mac gear, without Retina monitors, didn't have this version of Colorsync. That as noted changed with the Retina monitors.
And I'm not saying the monitor is the problem, it's likely the Mac ColorSync utility that is the problem for most color issues on a Mac. Retinas are in nearly every respect beautiful monitors. It ain't the monitor's fault if what's sent to it isn't correct.
I have no clue why going through Compressor 'fixes' the issue. Wish I did. @Kevin-Monahan , you're a Mac user. Any ideas there?
And there lies a question of what is different between an iMac Pro and MacBook Pro with a Retina display? Because I am able to edit the whole project on my Mac Pro or iMac Pro and then when I reach color correction, I need to render from my laptop.
that is... unless I run all the footage through compressor first.
I believe my issue is the same experienced here:
I also see you have chummed in on that thread as well.
Try connecting a Dell, HP or ASUS monitor to all the Macs and see what happens. Keep in mind Resolve has a setting that is set by default to work with Apple products. I posted a YouTube video in these forums about it. That being said Premiere Pro may have a bug if it is 10 bit H.264/265 but I cannot say for sure.
One of the issues there ... is by 'standard', all YUV media is supposed to be assumed to be limited range ... encoded 16-235, which of course is properly then displayed 0-255.
You see, there is a big difference between encoding and displaying the file.YUV media is "supposed to be" limited in encoding, and only RGB media encoded as 0-255. And RGB media is most commonly either DPX image-sequence format or 12-bit 4:4:4:4 media.
The reason is that originally YUV media was tape, and the systems used the values from 0-15 and 236-255 for other data. Kinda stupid it's still "the way it's done" but that is what is expected when following the standard.
Resolve gives the user the ability to go around any CM setting. PrPro simply works according to the standards. Of course, a lot of people then do things that "seem logical" but in fact are not gonna work that well.
Such as assuming that using a 0-255 encoding for 8-bit YUV media would be better than 16-235. I've seen a number of pro colorists demonstrate that this is simply not the case. You aren't losing any tonal values in a YUV 16-235 encode. Weird as it seems.
And that's the way virtually all Rec.709 SDR 'standard' video is encoded ... by either 8 or 10 bit formats. And gets properly displayed 0-255 unless the user messes with settings that um ... perhaps they shoudn't.
Like I did when I started. It didn't end well, but I learned a lesson for sure.
Neil, dude stop talking crap. Premiere is oversaturating the colors, nothing to do with Apple.
Naw, can't possibly have anything to do with a difference between displays with Apple's gamma 1.96 and standard 2.4.
And apparently, nearly every colorist from Walter Volpatto on down, and the people making both Calman and Lightspace color calibration apps have no freaking clue about color management.
On my desktop system Premiere and Resolve match perfectly. And I don't use crap like QuickTime.
But then, due to the calibration routine on that system, I don't need nor use DCM. But when testing it, it makes no difference to the image on my system visually or by scopes.
On my Acer laptop, I do use DCM. And it does what it's designed to do: get a non-standard display closer to Rec.709.
YEAH BRO, JUST CHANGE THIS SETTING, AND IT WILL BE BACK TO NORMAL (OVERSATURATION WILL BE REMOVED):
5TH OPTION, JUST TICK THE BOX SAYING: Display Color Management (requires GPU acceleration)
AND YOU'LL BE GUD TO GO!
Copy link to clipboard
Premiere Pro's colors are dead on for the Canon Vixia cameras and Sony A 7 III as seen in the video below. Having said that I am not sure Adobe Premiere Pro has a color shifting/contrast bug as you claim. It might for some video codecs but keep in mind no camera was created to be played back on an iMac using Quicktime. That being said no camera was created to be played back on a Dell laptop using OBS. OBS, Quicktime and Window Media player will all handle video a tad bit different. The Canon T3i and Sony A7 III have HDMI ports to be played back on broadcast complaint hardware (your TV) not an iPad. What does the video look like if you connect your camera to the TV using the HDMI port? You can use an adjument layer for exporting to different playback devices. Even Resolve needs to be tweaked at export.
The two videos below might be helpful. One is for editing the other is for exporting.
i have a decent understanding of monitor calibration and viewing in different programs like VLC and I have seen the color management option in other threads and forums. Where I get stuck is that if I was to take a clip, open it in premiere on my Mac Pro (or my friend's or an iMac Pro that I used to have), and export it, there would be a contrast and saturation difference no matter what program you watch it in. If you do that same process with a MacBook, no issue.
I even exported the footage from my Mac Pro, opened it on my MacBook and looked at the Lumetri color scopes and you can see that the information is different.
however, if you run the original footage through apple compressor software and bring it into premiere (doesn't matter what machine), the scopes are the same and everything looks the same.
You can use whatever display you want or use no display at all with Remote Desktop (I tried that too), the issue persists if an Apple Desktop is the one reading the file. Weirder yet is that after an update, the problem went away UNTIL premiere generated a peak file.
You are getting different looks depending on the device and software being used but which one looks correct? As I stated what does the video from that camera look like when connected to a TV? You have to find out which porgram and device combination matches what the camera looks like out of the camera before you can get acurate color correction done. Dell latops, iPads, ASUS monitors and cellphones all have different color spectrums. Not one video camera is designed to be played back on a cellphone. What you see on your iMac when exported will look different than what I see on my Dell Laptop. Does that make sense?
Having said that a Dell Laptop with an Intel CPU and integrated GPU might export things different than an AMD X5900 with at GTX 3080 because the hardware is different. Having said that there should be no difference between hardware rendering and software rendering when using Premiere Pro but there is. I admit that is a bug. Adobe needs to scrap the Mercury Playback Engine ASAP and implement the Saturn Six system ASAP. The Mercury Playback Engine has seen better days.
Keep in mind the color profile setting of your OS may not be setup 100% correct or certain programs you use may not be setup 100% correct. Premeire Pro, Avid and Resolve must be setup 100% correct.
The only time it looks different is when it is exported from a Mac desktop. And when I say different I mean noticeably different. Obviously a OLED tv is going to have better blacks than an LCD. When doing the test you recommend, the tv matches what I see on my laptop export and what I see in QuickTime on my Mac Pro, and what I see on my external display connected straight to my camera.
And yes that makes sense. When the raw footage is imported into anything, it looks normal to me (adjusting slightly for screen differences) EXCEPT when it is in premiere. Then when exported, that same contrasted, saturated look remains and continues to look terrible across any screen because the Mac Pro or iMac Pro changed it on export to what the preview looks like.
Did you watch my videos? Have you tried an adjustment layer to compensate? I am starting to think you don't have Premiere Pro tweaked out 100% on the desktop Macs. You know what you could do? Hook up the same externl monitor (Dell, HP ASUS etc) to the Macbook the iMac and the Mac Pro. If the same monitor looks different on all the devices something is wrong. Maybe you need to tweak the graphics card or color profile. There shoud be a hardocre Mac users who knows what is up.
I did watch the videos and that is not reflective of what I am talking about. Monitors change the look, computers do. I used the same monitor for my Mac Pro that I did for my Macbook Pro and they previewed/exported different results. I even lauch into remote desktop so there is no monitor at play and you can tell there is a color difference with the Mac Pro.
The computer monitor has nothing to do with the export.
I want to know if you output just the program monitor of Premiere Pro to the second computer monitor does the color and contrast stay the same on all three devices? Having said that I am surprised a hardcore Mac users has not responded. All I have is a Mac Mini so I cannot really make a comparison.
Copy link to clipboard
what's up color management peeps!
have you tried changing your operating system's default color profile to rec. 709? I believe each version of mac has their own flavour of color(which depends on the screen size, no less!)
then turn on color management in premiere.
since compressor changes the 1111 color code metadata, then perhaps the rendering is done differently in hardware encoding as well.
as a final control, render out both ways for 5 seconds and post to google drive for a non-mac user to see if the color flags/metadata has an actual render bug or the os is displaying referred apple wonkyness.
some metadata tools include
exiftool.org and bbc qtff-parameter-editor
I think you are on the right track here, but I have been having trouble finding the place to change the color profile for the OS specifically. Everything in ColorSync is for devices connected to the computer. And when I try and google a way to do it, all the articles are talking about how to change your monitor's color profile, not the operating system's.
Conoro, I had mentioned your color profile might not be setup 100% correct prior to Chris. That is why I wanted you to use a second computer rmonitor on all there devices. Does Premiere Pro's full screen output to the second computer monitor look the same on all three devices? I am not concerned about the export at this point in time. Having said that does the full screen output from FCPX and Resolve look the same on all three devices using the second computer monitor? Those tests should give us a lot of info.
Ahh, Compressor changes the color tags ... the NLC tags? What does it change them from/to?
That would be good to know. I know the Resolve work-around for encoding for ColorSync is by changing the encode to "Rec.709-A" (yes, A for Apple) where it tags the file 1-2-1. "2" as a value in the NLC list is "uncategorized" ... an unknown ... but ColorSync then applies Bt.1886/2.4 gamma to the file correctly.
So what does Compressor change it to?
I'll bet this is something to do with the NLC tags as Chris notes above. I'll be checking with some Resolve/Mac friends to see what they say.