Copy link to clipboard
Copied
Hello,
could you someone recommend me what change should be done when editor means that both images have exposure problems? "Unfortunately, during our review we found that it's either over- or under-exposed, so we can't accept it into our collection."
Thx.
Just a point,
I think that the images are overexposed a bit, there are signs of clipping in the highlights, and yes there is a lot of red -but there would be because there is a lot of red. I don't think that saturation is a problem here.
Histogram in first image.
After exposure correction using Camera raw Filter - (as this a jpg image) you get this:
corresponding histogram:
The blacks are still a bit clipped, but I don't think it matters here as it is coming from the dark shadow areas of the blueberr
...Copy link to clipboard
Copied
Hi beaver1234, I love these photos. It looks to me that they are oversaturated while the exposure might not be a problem. Take a look at exposure under the image adjust menu. Also, use Curve to adjust these and play with them until they are perfect saturation, exposure, and hue. I will also invite in Jacob Bugge and davescm
to have a look. Best regards, JH
Copy link to clipboard
Copied
Thx for the answer.
I checked white and blk point double times and also to me it looks OK.
Histogram looks OK as well.
If it is oversaturated they should write problem with saturation and not exposure...
The image was not arranged, was taken at street food market.
I could reduce colors, saturation, however there is visible trend to make especially food more saturated, I mean very saturated.
Copy link to clipboard
Copied
Hi
If you look at the histogram, the red channel is blown on those images, particularly the first image below. I have added a green color fill layer set and set Blend if to 255 to highlight where the blown areas are.
Dialing back the stauration and red in the conversion from the raw image would bring that back under control
I hope that helps
Dave
Copy link to clipboard
Copied
Hello and thx for the answer.
I checked few spots (eyedropper 3x3) and here is my opinion.
I highlighted 2 spots (approximately), both are inside that green area.
One is in that almost but not fully white cream and another one is inside red area.
"white" spot has 225/253/254 in RGB or 0/1/6/0 in CMYK
"red" spot has 255/104/90 in RGB or 0/71/60/0 in CMYK
When one colour of RGB or even 2 colours are set for 255 it does not mean that this is not colour.
Both spots are not white really, there are still some colours, especially "red" spot.
Probably no printer is able to print 1% of the color only, but good printer should print at least 3%.
Both spots are in printable areas.
It still does not give sense why images were refused.
Copy link to clipboard
Copied
Hello again beaver123, In general, you are nearly correct - specifically, you must remember that the company who purchases your photograph will want the pleasure of adjusting many things - especially the saturation - trend in very saturated but in their hands. In this case, less is more. Kind regards. JH
Copy link to clipboard
Copied
Hi
It is good to fully utilise the channels but your images show more than just the normal specular highlights reaching the digital maximum. Whilst it is indeed your perogative whether to blow the red channel , or any other, it is also Adobe's choice whether to accept your image for stock use which may involve subsequent conversion to other colour spaces.
The red channel issue is easily addresed in the raw conversion stage with minimal impact on your images which, incidentally, I do like.
Dave
Copy link to clipboard
Copied
Hi beaver
Camera Raw show a lot of clippings of highlights especially on the back items. Therefore to correct the issue you need to reduce the "highlights", and possibly take off a little on the "lights". If you use Photoshop, open the image in camera raw. I'm not sure what OS you use, but on Windows, hold down the "alt" key on the keyboard while you drag to reduce highlight. Do the same when reducing "light" (for some other OS Ctrl is used instead of Alt). Once you remove all the clippings, and the display becomes totally black while the "alt" key is held down, it means the correction is made. Once that is done, your photo should be ok for reupload.
I hope this helps
Best wishes
JG
Copy link to clipboard
Copied
Hello and thank you to all of you. I made new images and will try to upload them again. Thx.
Copy link to clipboard
Copied
Your are welcome.
Copy link to clipboard
Copied
Just a point,
I think that the images are overexposed a bit, there are signs of clipping in the highlights, and yes there is a lot of red -but there would be because there is a lot of red. I don't think that saturation is a problem here.
Histogram in first image.
After exposure correction using Camera raw Filter - (as this a jpg image) you get this:
corresponding histogram:
The blacks are still a bit clipped, but I don't think it matters here as it is coming from the dark shadow areas of the blueberries.
The overall exposure needs to be balanced more.
The second image is a similar situation.
That's my opinion.