Questions

I followed some online build guides with the intent of editing 4K videos. Earlier this week I just bought two new SSDs and put them into my system thinking this would solve the problem. I've got my OS and software coming off one SSD and I've got my footage coming off another. Then I've got my scratch disks and cache coming off a non SSD drive. And I still have lag, makes me want to pull my hair out.Here is my build.Processor: Intel i7-6700k CPU 4.00 GHz 4001 Mhz 4 Cores32 GB RAMGeForce GTX 1070SSDs: Samsung  850 EVO 250 GB (OS and Software)Samsung SSD 850 PRO (Footage)And then Ive got two non SSD drivesIm running Windows 10 and the newest version of Premiere ProDoes anyone have any thoughts?[Moderator note: moved to appropriate forum]

I have a CPU with a PCI Express 8x slot. I intend to buy a videocard to use with Premiere and After Effects. I already know the video card list specified in the Premiere minimum requiremen.  Can anybody tell me if there is any  os this card available in the PCI Express 8x format? Thanks in advance. Stefano Dehò[Moderator moved from the non-technical Lounge to Hardware Forum.]

Hello everybody.I need to upgrade my laptop, which is of course far from the ideal configuration for video editing.infact this is my mobility laptop which I usually use at home for small projects which doesn't involve heavy loads, FX, and so on.In my studio I already have a workstation to do the hard work. So this isn't my first editing machine (and it wouldn't be in any case!)The specs are:CPU: Intel i7 6500u (ULV, so it's a mobile dual core cpu)RAM: 8GB DDR3 in dual channel (soldered onboard)GPU: Intel HD520, which actually allow me to use Mercury OpenCL acceleration, and I found it works very good;SSD: actually there's the stock Samsung 256GB SATA3 m.2 slot SSD. This is the part I'd like to replace. I've already checked the specs of my laptop, it can accept both SATA or NVMe SSD;Display: QHD IPS 13,3 touch & pen enabled display, 1x Display Port, 1x HDMI.Video workflowOn my laptop I usually use proxies to edit, to have a light and efficient workflow. With this config I can apply

I'm looking at a new PC, and have a limited budget.  Current one (a 2012 intel i5) is plaguing me with choppy, stuttering editing issues especially with 3 camera multicam edits.  I'm typically using 1080p H.264 format.  I've tried using proxies but that's not much help so I've decided to step up to a newer pc and likely a RAID drive system eventually (likely a RAID 10).I've seen a PC for $1000 equipped as follows: I-7 7700k (seventh gen) quad core 3.6ghz with 24 GB ram, a 256gb ssd + 1tb 7200 hd, 8gb AMD Radeon RX480 graphics card.  Has 2-USB 3.1 (that's one c-type and one a-type) plus two hdmi ports. Among the many things I'm hoping the community will offer guidance on is confirmation that the Radeon RX480 will take advantage of openCL.  If I have to, I may be able to switch out to (for $200 extra) to an 8GB NVidia GeForce GTX 1070 graphics card to take advantage of CUDA, but, given my limited budget, maybe at another time.  It will also depend on what I

We are a small agency with 4 Mac Book Pro workstations running Adobe CC. The machines are mid-2012 15" Retina machines running El Cap and have max ram installed. We are doing more and more projects in Premier Pro and After Effects and are looking to optimize the machines and Adobe CC versions to best work in our environment. Our latest issue occurs when trying to render in After Effects using the CC Media Encoder. We are getting error code 1609629695. In doing online searches for this problem, a host of solutions presented themselves which we are pursuing to see if any actually fix this issue. Several of the thread speak to recent updates causing problems and the solution being to revert to older versions. My question: Is there a list of CC versions, driver versions, etc that we should not upgrade beyond given our hardware limitations? And to follow that, are there best practices when it comes to settings in the Mac OS and/or withing Premier and After Effects that maximize use of our h

VideoPad is slow at rendering previews when I edit, and buffers too often, will Premiere Pro be better?  I think maybe videoPad doesn't make much use of the gpu. I have intel i7 6700 and 32 gm of Ram. My graphics card is nvidia geforce gtx 750 Ti, do you think a better one would help me quite a lot?  Also I do not have SSD.  Which graphics card would you recommend if I upgrade, I think my friend found one that was rated well for 200 or 300$, I forgot the name of it.  I am not really looking to do 4k editing for now, my dslr doesn't do 4k anyway.Thank you very much for the help.- Peter

Hello there!I have spent too much time trying to do this myself so I wonder if there is anyone who is willing to take a look at my workstation and tell me what I have done wrong. Perhaps contact me direct at[email removed by moderator as per forum policy.  Please use the PM system] Best wishes from Andrew

What kind of hardware/workstation do I need for renderinga) 4K videosb) 360° 180° and VR videos (with Mettle) - 4K or maybe even 8Kin not too much time?(a few hours are ok, but not one day)I want to make Video Art with graphics e.g. 3D or illustrations. The hardware should also be good for Mettle and Trapcode plugins.For rendering I use the Media Encoder and most times H.246.Should the workstation better be something like e.g. a Intel XEON 8core and one Nvidia Quadro P5000?Is a second GPU recommended? I ask this because AE needs a strong CPU, but the Media Encoder is GPU rendering.And how is e.g. a AMD Ryzen/Zen 8core with two GTX 1080 ti ? Would this be also good for more or less fast rendering? How much RAM makes sense? Is 32GB ok? Or should it rather be 64GB - or even more?It would be great to get some information from other AE/ Media Encoder users.

Hello guys,I'm on a quest to find the best currently available laptop for video editing. As stated, I need it for Premiere pro and After effects respectively.I've been a bit out of touch on processors and GFX cards lately so I needed some opinions in case I miss something.The best laptops that I've seen as favourites coming up are:The Macbook Book Pro.2.7GHz quad-core Intel Core i7 4980HQ16GB 2133MHz memoryRadeon Pro 455 with 2GB memory512GB PCIe-based SSD1Four Thunderbolt 3 ports9 Hour BattRazer Bladei7 - 7700HQNvidia GTX 106016GB (Max)256GB SSD5.5 Hour BattDell XPS 15 2017i7 - 7700HQGTX 105016GB (Expandable to 32)512GB SSD7 Hours BattThe Macbook obiously isn't an option because of the Radeon, but I through it in there since it always comes up. But is that it? And also, are there no 6 core i7 laptops yet? I haven't seen any and was hoping there would be by now. My desktop workstation is a i7 4930K, 32GB ram, with an OC GTX 780 Ti and I built that like 3-4 years ago. I guess there isn'

Hello , it's me again . . . still trying to learn the non linear stuff one month at a time.  Is this a computer powerful enough to run Adobe Premier Pro  CC 2017 CC and is there anything else that should be added to " boost " it up a bit more ?•     2.9GHz quad-core Intel Core i7 processor, Turbo Boost up to 3.8GHz•     16GB 2133MHz memory•     512GB PCIe-based SSD•     Backlit Keyboard (English) & User's Guide•     Accessory Kit•     Force Touch trackpad•     Radeon Pro 460 with 4GB memory

I've been lurking through these forums and I'm really glad it exists.I've been window shopping for a laptop to edit on and after reading a lot I've closed in on a clevo laptop with the following configuration. My budget is $1300 and this is what I could come up with. I can maybe go another $100 or $200 if absolutely required.Processor: Intel® Core i7-7700HQ Quad Core (2.8-3.8GHz TurboBoost, 6MB L3 Cache)RAM: 32GB DDR4 2400MHz RAM (2 Dimm)Graphics: 4GB GDDR5 VRAM NVIDIA® GeForce GTX 1050 TiPrimary Drive: 512GB Eluktro Pro-X Ultra Performance PCIe NVMe M.2 SSDInternal Expandability: One 7mm SATA III 2.5" SSD/HDD bayWhat do you guys think of this spec for running Premiere (intermediate. music videos, corporate films, shortfilms@@) and After Effects (beginner. mainly working with purchased templates)?Is the 512 GB PCIe NVMe SSD an over kill for this configuration? Many (not video editing specific) reviews I looked at, did not have the PCIe perform better than a SATA SSD. How different woul

Hey!I bought 2 days ago a Ryzen 1700X CPU with a Gigabyte X370 Gaming 5 motherboard to use, among other things, for Premiere Pro.I have tried all possible things and I can't get it to work properly, because of EXTREMELY fast "out of memory" behavior. So I have 16GB of RAM on my machine and if I import 20 4k video files, there's an 80% chance it will run out of memory during import, or a 100% chance it will run out of memory during conforming. The entire process takes around 30s and then Premier Pro is dead. It either closes itself, or I get the out of memory warning with a lot of errors reported by PP itself, cautioning me to save the work and close the program.I tried CUDA acceleration (GPU accelerated Mercury Engine) and software both. They behave the same. The lockup with CUDA enabled is more severe, it may even make the NVIDIA drivers crash. This is on a GTX 1070. Also tried with an RX 480 and it behaves the same, although there's no driver crash.I have tried with a fresh Windows 1

Im buying a new laptop to edit premier pro and after effects on, Im using HD/4K footage, my budget is around £800 and I want something that is lightweight. Do not want a Dell, quite happy with HPs. Not going to bother with any Macs

Dobrý den,už delší čas řešíme stále se vracející problém s HW nedostatečností pro střih videa a to i po upgradu PC.Nároky se stále zvyšují a to jak na již zmiňovaný HW PC, tak samozřejmě i na formáty pořizované modernímikamerami. Chápu, že to spolu úzce souvisí, a proto bych se rád zeptal, co nejvíce ovlivňuje výkon při střihuvidea v Adobe Premiere CC2017. Je to procesor? RAM? Grafická karta? Co má největší prioritu? Je lepší AMDs OpenCL nebo nVidia s CUDA a je v tom veliký rozdíl? Momentálně máme ve studiu pracovní stanici HP Z440s grafickou kartou AMD FirePro W5100, CPU Intel Xeon E5-1620 (8 jader - 3,5 GHz) a 16 GB RAM. Nejčastějipracujeme s video formáty .MXF ve full HD rozlišení 50p. Při multi-camovém střihu, kde by byly i jentři kamery- tři stopy s tímto formátem, PC totálně nezvládá a je nutné soubory překonvertovat do nižších formátů.Budu rád za každou radu a za každý tip. Předem mockrát děkuji a přeji hezký den.Hello,For a long time, we've been solving the ever-recurring probl

I tried premiere pro CC,and I'll edit 1080p60 DNxHD media:If I'll move to 4k,I'll create 1080p proxies,so non problemCan I use it without lag? I read a lot of posts complaining about Premiere's high requirements,but "system requirements" page is too generic(for example "multicore processor 64-bit..."pentium or Xeon????)i5 6500Gtx 1060 6gb16gb ddr4 2133mhz120gb samsung 850evo(OS and programs)1tb 7200rpm wd caviar blueI can buy an additional 120gb ssd if necessary

Hi Guys,I've got a Quadro K4000 with a limitation of 2500px across. I was looking at the dell UP3017 but really want the best for what I can afford. 30 inches is about the biggest I really want...would actually not mind two 27" monitors. $700-$1000 is my range.Would really appreciate any input.

Hi,I d'like to use new Adobe product version, but I got ram issue on all computer PC an MAC.I do plan to use Illustrator and Photoshop not on regular basis.For now I do still use CD version.I have to buy a PC and a MAC and I need user recommendation about the ram / cpu recommendation as the minimum requirement not seems to be enough...1-Is there a way to configure the cloud and related service not to run as service all the time?(even stopping the service manually seem to always restart)2-I have checked the minimum requirements for Ram for each program and this seems not to be enough I have tried several brand New PC and all was sludgiest even if I was not using any ram demanding applicationand I have tested on one MAC, a 4 yeards old MAC, this seems the one that was not really affected by the ram and there is not much ram in it.So does only MAC can run the Adobe application without ram issue?I understand this is always depending of what a user is doing the computer and I know that this

Recently our studio installed a proper video server for all our editors to work from. The main reason for doing this was logistics. Like many small studios we were perpetually trading drives with footage, back-ups were in many different places, footage would be lost on occasion. It was a terribly messy and unreliable system. Additionally in the last year we moved from shooting primarily on RED Epic-X and DSLR to RED Epic-W and Sony Cinema. So we started to have to deal with 8K R3D files and garbage Sony codec files! FUN FUN! Our poorly little (extremely top of the line) edit suites were choking. Initially it was perplexing to me because we have multi-cpu Xeon machines with top line geforce cards, fast m.2 caching. The works! So where is the bottleneck? Well it's in storage. Maybe every editor on earth but me already know this but boy was this server build and install an eye opener for me.I did some before and after benchmarks and I am posting them here in hopes that people will find th

In the past the idea was to reduce Pr processing bottle necks by using 3+ HDDs in a RAID configuration.With SSDs can we now skip the RAID controllers and put all our raw video and output video files on 1 SSD?Or maybe have a smaller SSD for Windows 10 and CC apps and a larger SSD for project and video files?A new system might include only 3 drives: 240MB SSD + 1TB SSD + 4TB HDD.Projects can be processed on the 1TB SSD and when completed moved to the 4TB HHD for storage in case they need to be moved back on the 1TB SSD for further processing.

Hey!I need some help to figure out what upgrades to get for 4k editing in Premiere Pro. I bought my pc to use for gaming and have no clue what so ever, if its okay for editing or not.My PC: Intel Core i7 6700K Msi Z170A Gaming M7 Main Board Corsair Vengenance Lpx 32GB DDR4 2400MHz ram Gainward GeForce GTX 980 Ti Phoenix Samsung 859 Evo 250 GB SSD Seagate Barracuda 1TB 7200 RPM HD Fractal Design Kelvin S24 watercooling Fractal Design Newton R3 800W

Hi,I want to start using the Premiere CC 2017 (I'm a student in cinema class) in cloud and going  to purchase a new computer especially  for it.We are very confused about what are system requirements and will appreciate help.Is the following configuration good enough for a regular use of the SW? Need any changes/additional parts?I5 with 16G RAMDISK SSD 256 or 512GINVIDIA GTX 107024" screenAnything else I need in the computer or the net?Thanks in advance,J.

Hey all,I wasn't able to find my laptop version in the forums, so does anyone know which Adobe Premiere I could run smoothly? Here are my laptop specs (it's a 2012 Acer Aspire V3-551) that I can find:Processor - AMD A8-4500M APU with Radeon(tm) HD Graphics 1.90 GHzMemory (RAM) - 4.00 GB (3.48 GB Usable)64-bit Operating SystemWindows 7 Home Premium (Service Pack 1)Thanks in advance! And let me know if you need anymore information.

Hi,Need to get a few new computers (streaming desktop, streaming laptop, playout laptop)wondering about how to spec them outWhat is the requirement for playing full HD to an LED wall for example?  and also what is needed to play 4K videos to LED wall.And what is needed only for full HD streaming?and for 4K streaming what specs on a system are needed?thank you sooo much

Hi All,I'm starting a new job soon and fear that the standard laptop given to employees won't effectively handle InDesign, Illustrator, Photoshop and Acrobat (or running any of these simultaneously). I will be the only person at the company, and probably am the first, who will be using these programs so I doubt they have any experience/ familiarity with the system requirements.That said, I wondered whether any of you could advise as to what the basic specs for a Windows laptop should be (CPU, ram, storage etc.) in order to run these programs effectively without freezing up or breaking after 2 years? I'm by no means looking for a beast machine, just specs that will do the job.Thanks!

Hi everyone. What do you think of this.Dell Inspiron 15.6" Laptop - Intel Core i7 - 16GB Memory - NVIDIA GeForce GTX 1050Ti - 1TB Hard Drive + 128GB SSD Black …We are looking at two hours of 4k, no proxies, with titles and color grading. Do you think it will be fluid with a smooth editing and playing back and moving things on the timeline, or not?also how about in 720p proxies. Will things move fluid then even when I will throw titles and maybe some effects?Does it tax the system to create proxies while editing on the timeline? If yes that is why I don't want any prizes. That faster way to edit possible.Also, very roughly what duration of exporting are we looking at? duration for both exporting in 4k and hd so that I can see my options.Thank you everyone.P.s. Footage from g7.