How do I specify 11x14 paper in page setup when printing from print module of LRC?

[randyschaeffer1021]

11x14 is not offered as choice. Nor do I see where it is possible to do a custom size. Thanks.

[TheDigitalDog]

It is done in the print driver or with the OS Page Setup. You don't mention the printer used so that's about all I can state at this point. 

[randyschaeffer1021]

Many thanks -- Im using an Epson SC P700.

[TheDigitalDog]

It shouldn't be much different than my P800. Note the GUI here may not match yours (I just updated to macOS 13) but you should get the idea. Use Page Setup for that printer:

[JP Hess]

What printer are you using? I will relate an issue I recently encountered. I don't know if it applies in your situation or not. I use a Canon PIXMA Pro 100. I wanted to print an 8.5 x 25" print which requires a custom setting, and the custom setting was not available. At the time LrC was set to print borderless and the custom setting was not available. But when I unchecked borderless printing the custom setting became available and I was able to get the print size I needed. Just a suggestion, Hope this helps.

[randyschaeffer1021]

Im using an Epson SC P700. Thanks

[JP Hess]

I am not familiar at all with that printer. However, I looked at the specs online. 11 x 14" is listed as one of the sizes that printer is capable of producing. Perhaps there is a user group for the printer that might be able to offer some assistance. Good luck in resolving the problem.