Please help me i want to render with my GPU but i cant choose the " Hardware Encoding" option and its says "Your system's hardware does not support hardware acceleration for the current settings" to me.|
My pc ( Intel i5 9400F , RTX 2060 Inno3d , Ram 16GB DDR4 ) please help thanks:(
There's multiple 'hardware encoding' options, and it's confusing.
First ... for activating a GPU within Premiere, that's in the Project settings dialog, the Mercury Acceleration option. For an Nvidia card, you set that to CUDA, and then Premiere will use the GPU for those things it uses the GPU for and nothing else.
Then, in Preferences there is an option for hardware encoding, which is dependent on your CPU ... not your GPU.
And in the Export dialog, there is the little phrase that appears only in H.264 encodes, about 'software' or 'hardware' encoding, and that is again referring to the CPU, not the GPU.
And finally, the CPU 'hardware encoding' for H.264 encodes is only available if you do a 1-pass encode. No application can do 'hardware encoding' with a 2-pass encode.
Thanks but why when im rendering my cpu keeps runs at 100% and my gpu only stay ~ 10% here's a screen capture of it
I too am unable to get hardware acceleration working, and am getting the same message when I try to render.
Mercury acceleration (CUDA) is switched ON via the 'project settings' menu
Hardware acceleration is also switched ON via the 'preferences' menu
And I am doing a 1-pass VBR encode with H264.
And yet, when I try to choose 'hardware encoding' I too get this message.
My system is:
i7-9700 3GHZ (which I believe supports QuickSync)
32 G RAM
GeForce GTX 1660 Super
Can anyone advise me on this? I'd very much appreciate it.
Thank you, the bit about the 2-pass being CPU-only (why?) solved my quandry.
No clue why the 2-pass is always in all apps CPU-only, but ... "it is what it is... " I suppose.
Neil said... use the GPU for those things it uses the GPU for
Not everything uses the GPU
So... is there any ways to render but the cpu not gets to 100% cause my cpu temperature is like ~90°C when im rendering
Look into and AIO cooler, 240mm or more. that should keep temps down another 20c°.
That said 90c isn't tjmax so it wont stop boosting, and Intel laptops run 90c all the time, 14nm silicon from Intel is tough. But for better noise and thermals an AIO will help.
The reason i asked this is because my CPU Temperature gets very high ( ~90°C) when im rendering a video and should i ignore that?
There are several problems with your current hardware and software configuration:
Put them all together, and you have fallen into the trap many gaming PC builders fall into: Go too heavy on the GPU but too weak of a CPU. Remember, CUDA apps work far differently from gaming. A higher-end GPU in CUDA apps rely heavily on the CPU performance just to keep up.
Hi you seem very knowledgible. I have just purchased a new computer with a intel i9 10900k, 64gb of ram, and an RTX 3090 and can't seem to enable hardware acceleration in the export media h.264 encoding pane. I have turned it on everywhere else. Can you advise? Do i need to enable quicksync? Where would I do that?
Two quick notes ... many of us don't realize that no app does hardware encoding with 2-pass exporting. I certainly didn't until RJL explained it awhile back. So if you're doing a 2-pass export, you won't have hardware as an option.
Second, depending on the CPU/GPU and some other factors, sometimes hardware encoding is faster, at times not. So it's something that each user kind of needs to test. RJL and Andy have had some detailed explanations of this and I'll leave that to them.
Try updating your Intel drivers and then report back.
Whatever drivers you update you can't run hardware encdoing at VBR 2-Pass. Now here is an interesting findings. Almost all the time I export my videos at 2-Pass with Software encoding. Now open your Task Manager and click on performance tab: CPU usage goes 92%(66dC) max and GPU(49dC) touches 100% at a time with Memory being content most of the time at 24.3 GB. My 15 mins 4K export time (some AF temps included) is 35 mins.
>cpu temperature is like ~90°C
What is your exact CPU cooler/fan that you use?
CPU temp at rest 32-37C, while running Encore 50-55C (did not monitor temp while exporting from PPro, but Encore does just as much work to author a DVD as PPro does while exporting)
I also have a 120mm fan installed in the vented side panel in my case
Yes. Cooling is also important. And a lot of build-it-yourselfers who use a locked, non-overclockable CPU just simply use the CPU heatsink that comes with that CPU (which, in the case of Intel CPUs, the CPU cooler that Intel provides proved wholly inadequate for anything above a 9th-Gen 4-core/4-thread i3 CPU because the cheap, thin, aluminum-only cooler is now the only stock cooler Intel offers).
That said, I did run my i7-7700 with its stock cooler for a short amount of time until I added a 120mm double-fan AIO liquid cooler in 2018.
The video below might be helpful for some people.
Thanks for the video link!