Adobe Media Encoder

I wanted to convert three videos from MP4 to MOV.Dragged them into the queue.Selected QuickTime as my FormatGoPro CineForm RGB 12-bit w/ Alpha as my Preset.Export Video and Export Audio are both checked.Opened the video and I get a black screen, but I hear the audio.What is happening here?

Greetings...I have a file I need to give to a vendor and they need a ProRes with PCM audio. Is it possible to make a ProRes file with Media Encoder that has PCM audio? Or if I just set the audio codec to the uncompressed, will that give me PCM?

A client has requested a quicktime file with Animation video codec. They requested the audio to be AAC 44.1kHz. When I go to the audio tab there doesn't seem to be an option for AAC audio. Is this not possible with Adobe Encoder? I'm able to do it with Telestream's Episode software, But I would like to use Encoder because the quality looks better. Thank you,

Never seen this before, in ~30 months of using PrP so far:I was doing a routine export of a multicamera sequence (matching sequence settings).  And the exported video switched (appropriately) between cameras accordingly per the source timeline, but only up to ~26 minutes in.  Thereafter, all the camera selection changes were just ignored, so that the exported video is, from ~26 minutes on (~6 minutes worth), all  from only one camera.  Upon discovering this, I checked the source timeline, and all the camera change edits are in place, as they should be. So, the camera switches were not reverted by some weird accident.  Rather, the problem was solely in the export.I'm not posting this as a question, since I'm not really expecting an explanation.  (Feel free to surprise me, though!)  Mostly, I just want a record of this weird little bug, in case it shows up again.The worrisome aspect here, is that this export was rather long (~32 minutes), and I was not

Hi I have movie it duration 1:30:00 i want to add logo on it When i add an after effect project(contain the logo I want to add it) to my adobe premier project and export by media encoder that take 5 hours!But when i export the logo by after effect (mov) and add to my adobe premier project that take only 30 minutes My laptop have 16 GB RAM Gtx 960 Core i7

Very happy about using Adobe Media Encoder. Until now.But yesterday when I had handed a video to a customer, I discovered that the video i had uploadet to Vimeo was suddenly in MONO !!I searched for the error and found out that it's AME that's the villain. Even though it writes AAC stereo, whats coming out at the other end are mono.It's not very smart, Adobe! I trust that the gear you rent out to me every month is alright! I'm a freelance and my tasks are important, while directors and CEOs are sitting and evaluating my work for them and they can not explain that it's in mono when most people listen in a headset, just that their experience is limited.As a video producer, I have enough to make sure and handle making videos, and I do not has to sit and check what your software tells me, also are true or false?Pho2graph

HelloI once used the free trial for Media Encoder quite a while ago and have not used it since the trial period ended but, I keep getting update notifications for it.Is there a way to stop getting these update requests or, has Media Encoder now been included with the Photoshop/Lightroom $9.99/mo plan?

Hi!I hope you can help me. I've been trying to export an animation that I did on Ae with AME. but it keeps showing me this error. - Encoding Time: 00:00:2208/24/2017 08:04:56 AM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Render ErrorRender returned error.Writing with exporter: H.264Writing to file: \\?\I:\archivos sonia\XV's Cenicienta\album animacion principal_AME\Album animacion principal JUEVES.mp4Writing file type: H264Around timecode: 00:00:00:13Rendering at offset: 0.000 secondsComponent: H.264 of type ExporterSelector: 9Error code: -1609629695------------------------------------------------------------Thanks in advance!

Hello,If I select in After Effects that I want to render my video with Media Encoder, the program will start up. (slow, but it starts)If its starts, the screen will pop up but my project isn't in the Que (up-right corner)When I try to add my project manually in Media Encoder, it say this, and nothing happen: Gyazo -Please, help me with this problem!Greetings,Max K.PS: All the programs I use are 2017.

Hi,I need some urgent advice on bluray settings. I have a master movie file that is 150GB 1920x1080 29.97 progressive and I want to output the best settings for a blu-ray DVD. I'm not sure what frame rate the export settings should be and whether I should choose H.264 or Mpeg2The DVD is for NZ but I don't know whether it really matters if I choose NTSC or PAL. It is being projected in a cinema if that make a difference. I also have an 8GB version of the film and I'm not sure if the quality difference between that and 150GB file is that different. Is it safer to use the enormous master file?Hope someone can help!

I have a Quicktime file from a video lab that has 4 audio tracks. 2 of the tracks are supposed make up the Dolby E Stream surround sound file.For reference, this is the audio tracks in the Quicktime file:Track 1 and 2: Stereo TracksTrack 3 and 4: Dolby E StreamIs there a way to load the Quicktime file in Adobe Media Encoder, and generate an AAC 5.1 Surround Sound file? Or as a fallback, to take the 2 Dolby E Stream files, and output the 6 separate mono tracks

I've followed the discussions before and changed the preferences but nothing. Could it be the LUT's?

Dear AME Support Team , As mentionned on this picture bellow , the remainning time ( 5h ) is finished but i can't get my produced video as AME doesn't show terminated state on the queue , please help out 'cause i've this problem once i tried 30 FPS settings instead of 15 FPS ( Weak Quality ) , i don't know if it will be the same result for the next video that has the same settings.Keep in mind that i don't a special graphic card 

Hello,I've create an AE project using Element 3d with some color correction effects to recreate the planet Earth, the composition is 1 mn 4K 60 fps.2 times, I've tried to render it in AME and all issued with errors : - Render Delay : 00:16:3608/16/2017 07:34:04 PM : Render failure------------------------------------------------------------Error during exportationVideo compilation's error. ^ n ^ render nErrorThe render return an errorWriting with the exporter : H.264Write in the file : \\?\E:\Videos\Earth.mp4Codec : H264Around time code : 00:00:03:40 - 00:00:03:42Render at level of offset : 3,667 sComposant : H.264 de type ExporterSelector : 9Error code : -1609629695------------------------------------------------------------ - Render Delay : 00:41:2708/17/2017 09:27:29 PM : Render failure------------------------------------------------------------Error during exportationVideo compilation's error. ^ n ^ render nErrorThe render return an errorWriting with the exporter : H.264Write in the

My Media Encoder CC will not launch and gets hung up on loading QuickTimeHost.bundlePlease, help solve this problem. Thanks!

I've downloaded all the WebM presets from WebM for Premiere . They are .epr files. The instructions say to import them one by one into Media Encoder. When I try this, I get an error, "Preset could not be imported. No exporter for this preset."How do I import the presets? (And yes, I tried copying them over in the Systems Presets folder and it didn't work).TIA

Hello everyone !I looked to find an answer to my problem but could not.I record with Dxtory AND THE VIDEO IS FINE when i launch it with VLC Mediaplayer or with Windows Media Player.BUT when i export it with Adobe Media Encoder CC, following the recommandations to upload for Youtube, there is a bug on the video when i read it : IT FREEZE AND THE SCREEN DROOL during severals seconds before it comes back to the normal.Here are the caracteristics : Format : H.264                                              Video 1920*1080 (1,0) 60 i/s Progressive                                      &nb

Hi!I have no idea what I'm doing wrong, but AME is always performing terrible.35-40min render for a pretty basic 1min mp4. Have the latest macbook pro.Pretty much any free online tool have better performance

I just rendered a 9 minute clip that took several hours. It is one long green screen take, keyed with Keylight.. Background is a PNG., with a vignette and slight Gaussian blur. One title layer overlay. iMac late 2013 27" 32BG RAM OSX 10.9.5 Media Encoder 2015.4 Pulling cam files from a USB 3 drive, writing to another USB 3 drive. The cam original is H.264, 90 mbps, 1080p. I opened the AE sequence in Media Encoder, outputting to DNxHD 145. I have 20GB dedicated to Encoder, and for rendering GPU Open CL is enabled. Not even sure if that makes a difference here, just trying to provide all the details. Is this just the nature of the beast, or is there a way to speed things up a bit? Would precomping the 3 layers in the AE sequence help at all?

HI! I am from Finland and i have question about media encoder: I really wanna that but it is trial.. Is there any way to get that without trial? Like buy it or?

Hello everyone!After changing my Creative Cloud language and reinstalling all apps, my Adobe Media Encoder remains in Brazilian Portuguese. (I want it in English)Is there another way to do it?(PC - Using Windows 10 - Adobe CC 2017)Cheers.

Two days ago, I interrupted AME from rendering one video. When I I tried "Add to Queue Media Encoder" from AE to AME again, the dynamic link would be in a forever "connecting to dynamic link" process. I haven't installed any new softwares/ plug-ins. I've tried restarting, re-installing AME and it did not solve the problem. Please help [Moved from the non-technical Lounge Forum to the specific Program forum... Mod][Here is the list of all Adobe forums... https://forums.adobe.com/welcome]

Dear AME Support Team, Like In the image bellow , i'm trying to render an after effects project , but i can't determine when it will be finished ,and i can't found good solution for this problem even i've set the best productions settings .Note: AME is in its default settingsPlease help me out , i was running for 2 days to solve the problem of not-importing AE project to AME after i solved it by reinstalling the both of AE and AME , i've found this stuck problem

Hello,When I try to export a file I already had exported before, the following error appears: Does anyone knows what it refers to and what can I do to correct it?thanks,Camila

Hello,I hope this forum section is the right one for my question. I did not find a section for questions regarding Panel SDK.Following the provided panel SDK examples, I am now trying to enqueue a job (add a job to batch). Currently it is not really clear, which of the provided functions I can use to do this and which parameters (order of paramters) the functions expect. Debugging my implementation (Extension Script Toolkit) I can see, that calling app.getFrontend() returns a set of functions to add something to batch:addCompToBatchaddDLToBatchaddFileSequenceToBatchaddItemToBatchaddXMLToBatchWhich of these functions is the right one to choose? Which parameters does the function expect?All job information we can provide are:filename (path to file)Preset-Name (or id)If we need a preset location (file path) how can we get the path for the presetDestination pathThanks in advance for any help.