Photoshop Developers

Tres personas sentadas detrás de una mesa redonda y otras cuatro en la misma situación, no son detectadas pour la opción detectar personas, con el fin de suprimirlas de la foto.Las personas se ven perfectamente  en la imagen, y Son lo suficientemente representativas para ser detectadas.

I've tried changing the language in Photoshop and reinstalling it, but the error persists.I'm trying to use the PhotoMerge feature, but I keep getting an error message. 

I finally had to reinstall the former Photoshop V 27.9 on both my Windows 11 workstation and Windows 11 laptop for the on-device remove tool for using my installed Nvidia RTX 5080/4090 with16GB VRAM. I’m running the current Nvidia Studio Driver 610.88 and the tool runs great and fast!. However, after updating to regular PS V27.9.1, also includes the current PS Beta V27.9.11, the On-Device remove tool to severely stalls and must cancel to avoid long waits. Using the Cloud selection works, only if on WiFi, but I am still waiting for an update fix for the off-line On-Device to function properly. Whatever changes happened in the PS updates, the On Device Tool was affected. This issue has been ongoing for over three months!! BTW - No logs are necessary to collect send as the identical issue can be recreated on any PC using Windows 11 and the RTX having 16GBVram card at Adobe PS lab, then read the log.

 Posted in the wrong community. Please remove or move this thread.Hello,I would like to report a reproducible Photoshop WinTab compatibility issue involving the Wacom Art Pen 2.Environment:- Windows 11 64-bit- Adobe Photoshop 2026: 27.9.1.1- Wacom Intuos Pro M (2025), model PTK670- Wacom Art Pen 2, model ACP70000DZ- Wacom Windows driver: 6.4.13-4- Tablet firmware updated through Wacom Update Utility- Photoshop brush setting:  Brush Settings > Shape Dynamics > Angle Control = RotationSteps to reproduce:1. Enable Windows Ink for Photoshop and remove/disable PSUserConfig.txt.2. Restart Photoshop.3. Rotate the Art Pen 2 while using a brush configured for barrel rotation.4. Barrel rotation works correctly.5. Close Photoshop.6. Create PSUserConfig.txt containing:   # Use WinTab   UseSystemStylus 07. Disable Windows Ink for Photoshop in Wacom Tablet Properties.8. Restart Photoshop and test the same brush.Actual result:Pressure and tilt continue to work in WinTab mode, but Art Pen 2 barr

# UXP defect report — cursor handling, and four missing DOM features Prepared 2026-08-20 from measurements taken inside a UXP hybrid plugin panel.Everything below was **measured in the panel itself**, not inferred: the testharness, its controls, and the raw verdicts are described at the end. --- ## Environment | | ||---|---|| Photoshop | 27.9 (Windows) || OS | Windows 11 Pro, 10.0.26200 || Plugin type | UXP **hybrid** (JS panel + native `.uxpaddon`) || Manifest | `manifestVersion: 6`, `host.data.apiVersion: 2`, `minVersion 24.2.0` || Loaded via | UXP Developer Tool (side-loaded) || Panels | two (`type: panel`), one main, one log | --- ## Summary Five defects, in rough order of impact. The first is the one that makes a classof ordinary UI impossible. 1. **`cursor` is not re-evaluated once a pointer button is held and moved** —   it reverts to the default arrow regardless of what any element specifies.2. **`cursor: url(...)` is discarded at parse time**, taking its fallback   keyword wit

Updated Photoshop two days ago (with older version removal), and now I don't have anything, and can't figure out how to get my old version back. I'm on an Imac 17 from 2017 with Radeon Pro 570 4 GB, 24 GB of Ram

Photoshop Beta 27.9 - When invoking the Sky Replacement menu (Edit > Sky Replacement) the brightness slider is not functional, although it moves freely, there is no visible change in the preview, nor is any brightness to the sky visible when applied.  All other slider functions within the Sky Replacement panel function normally. Windows 10, 64 GB RAM, nVidia GeForce GTX 1070 Ti

Desde hace como un mes y medio que hicieron actualizaciones photoshop en lugar de mejorar parece retroceder.La configuración del espacio de trabajo no la mantiene; constantemente hay que estar restaurando al que nosotros guardamos. Las acciones constantemente las borra, aparece un mensaje que indica que las acciones no se pueden cargar por un problema en el sistema.Recientemente, trato de cambiar de modo de vista con la letra “f” y no me deja, solo empieza cambiarse sin control.La selección automática también está fallando, hace una peor evaluación de los colores para hacer la selección.“Seleccionar sujeto” estaba mucho mejor que la actualización nueva. Es poco práctica, confusa de usa y en general se equivoca.

Could not apply the workspace. Select Subject Classifier model not loaded correctly

iPhone17 Pro MAXでPhotoshopアプリで画像選択し、AI機能を使用する際、「Photoshop AI の使用状況」の画面が出てくるが、スクロールできないので最下部のボタンが押せない。「18歳以上である必要があります」のした下のボタンが押せない。 

La herramienta con la que están supliendo “seleccionar al sujeto de manera automática” NO SIRVE. Las mejoras se supone que deben hacer el trabajo más simple. Esa es una herramienta sumamente útil y funcionaba bastante bien. Espero puedan regresarla por que la nueva es una cochinada. NO SIRVE

De un momento a otro, la herramienta “curvas” deja de funcionar. Solo deja realizar un cambio y la línea modificadora ya no se puede mover. También la herramienta “relleno generativo” deja de funcionar de un momento a otro 

La sección de curvas no sirve; ya dejó de moverse. La herramienta de selección raída también dejó de funcionar y me marca error Es horrible no poder trabajar con estos errores y en épocas con demasiado trabajo.  

Adobe Photoshop Version: 27.5.0 20260314.m.3457 1720e4b  x64 (beta, PublicBeta)Windows 10Steps:Select something with the marquee tool, or other selection tool click “Select Inverse” in the contextual task bar use the brush tool on the selection try to press crtl + z or other keyboard shortcuts it doesn’t work! for some reason!I wanted to type out a more detailed description with more examples but I somehow submitted this before I was done typing. This has actually been happening for a while but I just was ignoring it.I cannot figure out how to consistently get the keyboard shortcuts working again other than waiting for a while and clicking seemingly random things on the screen. 

En la sección de curvas se desconfiguran y la línea ya no la puedo mover después de un tiempo para hacer ajustes en la imagen. Solamente se mueve con las teclas de movimiento. Después de desconfigurarse  la sección de curvas todo photoshop falla 

Dès que j’ouvre photoshop mes outils ne s’affiches pas. J’ai essayer de les masqué puis les affichés, j’ai éteint démarré, encore éteint encore démarré mais absolument rien n’y fait, à chaque fois c’est le même problème depuis la version 27 et c’est extrêmement pénible. J’ai désinstallé photoshop puis réinstallé mais rien y fais… Résolvez ce problème s’il vous plait. 

Photoshop バージョン: 27.4.0問題:キャンバスサイズの変更がアクションに記録されない。詳細:Photoshop 27.4.0 で新規アクションを作成し、キャンバスサイズを変更すると、ステップ自体は記録されますが、幅と高さの値が保存されません。そのため、アクションを実行してもキャンバスサイズが変更されません。テスト結果:同じ操作は Photoshop 26.11.3 では正常に動作します。26.11.3 で作成したアクションは、Photoshop 27.4.0 でキャンバスサイズを正しく記録し、正常に動作します。結論:これは Photoshop 27.4.0 のアクションレコーダーのバグであると思われます。

Photoshop version: 27.4.0 Problem:Canvas Size changes are not recorded in Actions. Details:When creating a new action in Photoshop 27.4.0 and changing the Canvas Size, the step is recorded but the width and height values are not saved. Therefore the canvas size does not change when the action is played. Test results:The same operation works correctly in Photoshop 26.11.3.Actions created in 26.11.3 record the Canvas Size correctly and run normally in Photoshop 27.4.0. Conclusion:This appears to be a bug in the Action Recorder in Photoshop 27.4.0.

Add the ability to paint brush strokes as lines, like in Fresco. When you draw a stroke in Fresco and hold at the end, a perfect line is drawn using your current brush. The only way to accomplish this now in Photoshop is to either Shift-tap (which draws a line from your starting point but with no indication like a rubber band) or to create a path then stroke the path with your brush. Both of these methods are outdated and cumbersome. The Fresco method is much easier and modern.

Product: Adobe PhotoshopVersion: 27.3.1Operating System: Windows 11 ProOS Version: 24H2Build: 26100.7705Architecture: 64-bitPrinter Model: HP OfficeJet 3833Printer Type: Inkjet(Usual Connection: USB or Wi-Fi — does not affect the result)Problem Description: Photoshop is excessively slow during the printing process.When sending any document to print, the program spends a considerable amount of time processing the job before sending it to the printer, even with simple, small files.The system functions normally, and the problem only occurs within Photoshop, not with other applications.Frequency:The problem occurs consistently and reproducibly.Expected Result:The print job should be processed and sent to the printer immediately or with minimal latency.Current result:Prolonged delays before the document is sent to the printer.I request that this be reviewed as a possible performance or compatibility issue between Photoshop 27.3.1, Windows 11 Pro 24H2, and the HP OfficeJet printer's printing

** Edit **posted in wrong senction. Reposted in photoshop beta bugs.  

No puedo expotar mis archivos jpeg en alta calidad, no me permite configurar una alta calidad antes de guardar en mi version de ps web  

Bug Report:Photoshop Version: v26.11.0 and betaOperating System: Windows10 & 11Problem:Any UXP plugin, including the most minimal test case, fails to launch from the Plugins menu. It always produces the same console error: TypeError: Cannot read properties of undefined (reading 'commandId') at oe.menuItemClickHandler.Steps to Reproduce:This has been confirmed on two separate computers with fresh installations of Photoshop and the UXP Developer Tool. The error is 100% reproducible with the minimal plugin code below.When this plugin is loaded and "Run Bug Test" is clicked from the Plugins menu, it throws the commandId error instead of showing the alert. This demonstrates a critical failure in the UXP command system for this build of Photoshop.

ClientId:0e6d8028a3d340fe9c7202f7a3151ef7Description of issue:We are trying to connect photoshop to the authorization service from a remote server, it is located in Germany Server IP:91.107.225.32, but we get a ssl error due to which we cannot connect to you for authorization. We are using python urllib library for making requests Error message:Traceback (most recent call last):File "/usr/local/lib/python3.8/urllib/request.py", line 1354, in do_openh.request(req.get_method(), req.selector, req.data, headers,File "/usr/local/lib/python3.8/http/client.py", line 1256, in requestself._send_request(method, url, body, headers, encode_chunked)File "/usr/local/lib/python3.8/http/client.py", line 1302, in _send_requestself.endheaders(body, encode_chunked=encode_chunked)File "/usr/local/lib/python3.8/http/client.py", line 1251, in endheadersself._send_output(message_body, encode_chunked=encode_chunked)File "/usr/local/lib/python3.8/http/client.py", line 1011, in _send_outputself.send(msg)File "/

I am seeing an issue that started today that is affecting an existing service that we have been using with Adobe for some time. The error message is very vague so I am not sure if it is on our end or Adobe's. Can someone point me in correct direction to find paid support for this as well? Step 1: Request the token to use the services from : https://ims-na1.adobelogin.com/ims/token/v3Request: POST- client_id- client_secret- grant_type- scope Response: sends back the "access_token" along with some other data Step 2:Make a request to "https://image.adobe.io/pie/psdService/text" with a json body of: {  "inputs": [    {      "href": "https://www.omnant.com/IL.PSD",      "storage": "external"    }  ],  "options": {    "layers": [      {        "name": "DisplayName",        "text": {          "contents": "Bob Smith"