2 Mics - 1 mic/host sounds great, 1 mic/host sounds terrible

Forum|Forum|8 years ago
March 6, 2018
1 reply
1238 views

Hi Everyone!

Starting a podcast and me and my co-host are testing our equipment. We have a Behringer 1202USB mixer going into our MAC Book Pro with Adobe Audition. We have two Audio Technica 2100 xrl mics. Mic 1 sounds terrific and Mic 2 sounds like the person is far away and in a can. Mic 2 also pics up hissing sounds and other small noises and Mic 1 does not. We've switched mics and put them in every port and which ever mic is the 1st one sounds great so we know it's not the mics. If we have each mic in port 2 and 3 the one in port 2 sounds the best. If we have them in port 3 and 4 the one in port 3 sounds the best. I've checked the settings on the mixer every channel is set the exact same. Is this just a bad mixer or user error? Any help would be appreciated. Thanks:)

This topic has been closed for replies.

SteveG_AudioMasters_

Community Expert

These sound like the sort of symptoms you get from a faulty lead. Have you tried using the same channel and the same mic, and swapping the leads over?

Bob Howes

Inspiring

Private message from the OP now replied to but for the record, what I said was:

Sorry for the delay in replying but I live in Australia and have had a couple of busy days.

Anyway, some things to check:

First, as Steve said on the forum, it could be as simple as a faulty cable.

Second, I need to ask a question: since the AT2100 is dual XLR/USB, are you using the XLR out via the mixer? If not, you should be--sometimes you can get two USB audio devices to work but it's often a recipe for problems

Third, working via the mixer, make sure you have one mic panned hard left and the other hard right--if one if panned centrally, you'll get one channel with a mix of both mics....and the distant one will sound like you describe.

Fourth, make sure you have the Driver and Routing set properly in Audition--first go to Edit/Preferences/Audio Devices and make sure that's set for the Behringer mixer. Then go to the input control (in the info window at the left end of each multitrack track. Be sure you have the two available inputs from the 1202 set, not the same in both feeds.

Good luck...hopefully one of these might start you in the right direction

Bob

SteveG_AudioMasters_

Community Expert

https://forums.adobe.com/people/Bob+Howes wrote
Second, I need to ask a question: since the AT2100 is dual XLR/USB, are you using the XLR out via the mixer? If not, you should be--sometimes you can get two USB audio devices to work but it's often a recipe for problems

I got the impression that the OP was talking about channels on the mixer rather than 'ports' (that we'd think of USB as being) as such.

The other thing I was going to mention was to check the headphone output on the mixer. If everything sounds okay there, then you'd have to be rather suspicious about the USB send facilities...

Sign up

To post, reply, or follow discussions, please sign in with your Adobe ID.

Sign in to Adobe Community

To post, reply, or follow discussions, please sign in with your Adobe ID.