Safe Work Procedure for Lifting and Removing Equipment on Top of a Platform Using a Sitting Forklift, Weighted Rigging Belts, and Machine Skinners
Objective
To ensure the safe lifting and removal of equipment on top of a platform using a sitting forklift, weighted rigging belts, and machine skinners.
Scope
This procedure applies to all personnel involved in the lifting and removal of equipment using the specified tools and equipment at the designated worksite.
Responsibilities
Supervisor: Ensure that all personnel are trained and follow the safe work procedure.
Forklift Operator: Operate the forklift according to this procedure and ensure safety measures are followed.
Riggers: Attach and secure rigging belts correctly.
All Personnel: Adhere to safety guidelines and report any hazards or unsafe conditions immediately.
Equipment and Tools
- Sitting forklift
- Weighted rigging belts
- Machine skinners
- Personal protective equipment (PPE): hard hats, gloves, steel-toed boots, high-visibility vests
- Communication devices (e.g., radios)
Safety Precautions
- Ensure all personnel involved are trained and competent in the use of the equipment.
- Inspect all equipment (forklift, rigging belts, skinners) for defects before use.
- Maintain clear communication among all team members during the operation.
- Establish an exclusion zone around the lifting area to prevent unauthorized access.
- Follow the manufacturer's guidelines for the forklift and rigging equipment.
Procedure
Pre-Operation Checks
- Inspection:
- Check the forklift for any mechanical issues, ensuring it is in good working condition.
- Inspect rigging belts for signs of wear, damage, or defects.
- Examine machine skinners for any visible damage.
- Site Preparation:
- Clear the area of any obstacles or debris.
- Ensure the platform is stable and capable of supporting the weight of the equipment to be lifted.
Rigging the Equipment
- Attaching Rigging Belts:
- Position the rigging belts around the equipment, ensuring they are secure and evenly distributed.
- Verify that the rigging belts are rated for the weight of the load.
- Using Machine Skinners:
- Attach machine skinners to the equipment as needed to facilitate lifting.
- Ensure skinners are securely fastened and positioned to prevent slipping.
- Lifting the Equipment
- Positioning the Forklift:
- Position the forklift with the forks under the equipment, ensuring it is centered and stable.
- Slowly lift the forks to take up the slack in the rigging belts.
- Lifting Process:
- Gradually lift the equipment, maintaining a steady and controlled pace.
- Continuously monitor the load and adjust as necessary to maintain balance.
- Communication:
- Use clear signals or radio communication to coordinate the lifting operation.
- Ensure all team members are aware of their roles and any changes during the lift.
- Placing the Equipment on the Platform
- Moving the Forklift:
- Carefully maneuver the forklift to align with the platform.
- Approach the platform slowly, ensuring the load remains stable.
- Placing the Load:
- Gradually lower the equipment onto the platform, maintaining control at all times.
- Once the equipment is in place, ensure it is secure and stable before detaching the rigging belts.
- Post-Operation
- Detaching Rigging Belts:
- Carefully remove the rigging belts and machine skinners from the equipment.
- Inspect the rigging belts and skinners for any damage that may have occurred during the lift.
- Securing the Area:
- Ensure the equipment is properly secured on the platform.
- Remove any remaining tools and equipment from the area.
- Inspection and Reporting:
- Conduct a final inspection of all equipment used.
- Report any defects or issues to the supervisor.
By following this safe work procedure, we can minimize the risk of accidents and ensure the safe lifting and removal of equipment on top of a platform using a sitting forklift, weighted rigging belts, and machine skinners.
1347
Replies
AdChoices
