Error Coldfusion 2021

Report · Dec 23, 2021

Hello ,:)

I have a problem with my configuration of coldfusion.

I have this same error :

Thu Dec 23 15:34:05 2021] [6687:140487759288064] [error] ajp_service::jk_ajp_common.c (3021): (cfusion) connecting to tomcat failed (rc=-3, errors=161, client_errors=0).
[Thu Dec 23 15:34:05 2021] [6688:140487964980992] [info] jk_open_socket::jk_connect.c (816): connect to 127.0.0.1:8020 failed (errno=13)
[Thu Dec 23 15:34:05 2021] [6688:140487964980992] [info] ajp_connect_to_endpoint::jk_ajp_common.c (1158): (cfusion) Failed opening socket to (127.0.0.1:8020) (errno=13)
[Thu Dec 23 15:34:05 2021] [6688:140487964980992] [error] ajp_send_request::jk_ajp_common.c (1829): (cfusion) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=13)
[Thu Dec 23 15:34:05 2021] [6688:140487964980992] [info] ajp_service::jk_ajp_common.c (3000): (cfusion) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2)
[Thu Dec 23 15:34:05 2021] [6688:140487964980992] [error] ajp_service::jk_ajp_common.c (3021): (cfusion) connecting to tomcat failed (rc=-3, errors=162, client_errors=0).

my server.xml:

<Connector protocol="AJP/1.3" port="8020" redirectPort="8453" secret="9661aacd-ac6f-42ad-8dd8-c371c36.." maxThreads="500" connectionTimeout="200000" tomcatAuthentication="false" address="127.0.0.1"/>

<!-- An Engine represents the entry point (within Catalina) that processes

My workers.proprietes:

heartbeat_interval=30
heartbeat_limit=90

#Start of workers.properties associated with 'cfusion'
worker.list=cfusion

worker.cfusion.type=ajp13
worker.cfusion.host=127.0.0.1
worker.cfusion.port=8020
worker.cfusion.heartbeat_servlet_path=/__cf_connector_heartbeat__
worker.cfusion.connection_pool_timeout=60
worker.cfusion.monitoringsecret=49162e5a-c1dc-4d25-a560-d8056d02016d
worker.cfusion.secret=9661aacd-ac6f-42ad-8dd8-c371c366c...
#End of workers.properties associated with 'cfusion

Please for you Help i don't know what i can do

THANKS

Report · Dec 23, 2021

Suggestion:

Make sure the connection settings in server.xml match those in workers.properties:
connectionTimeout / connection_pool_timeout
maxThreads / connection_pool_size / max_reuse_connections
secret (the secret must contain 36 characters and no dots; its structure
must be in the form xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx)
Comment out the heartbeat_servlet_path setting.

Experiment by switching the host value from 127.0.0.1 to localhost.

Your workers.properties should then look like:

heartbeat_interval=30
heartbeat_limit=90

#Start of workers.properties associated with 'cfusion'

worker.list=cfusion

worker.cfusion.type=ajp13
worker.cfusion.host=localhost
worker.cfusion.port=8020
# worker.cfusion.heartbeat_servlet_path=/__cf_connector_heartbeat__
worker.cfusion.connection_pool_timeout=200
worker.cfusion.connection_pool_size=500
worker.cfusion.max_reuse_connections=500
worker.cfusion.monitoringsecret=49162e5a-c1dc-4d25-a560-d8056d02016d
worker.cfusion.secret=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

# End of workers.properties associated with 'cfusion

Report · Dec 24, 2021

Thanks you so much i will try it

Report · Dec 25, 2021

@imad22375965ncv4 , before you test, remember to recreate the connector. You can do so by running the Web Server Configuration Tool, {INSTANCENAME}\runtime\bin\wsconfig.exe.

Report · Dec 24, 2021

Regardless of whether the rest of this suggestion may pan out, I would note that it's inappropriate to make your recommendation 2, "Comment out the heartbeat_servlet_path setting", without more context.

First, I don't see at all that the OP's problem will have anything to do with that.

Second and most important, I realize that you may have in mind past reports of people who had SOME problems that were ultimately solved by removing that, it's still inappropriate to simply recommend that people remove it without clarification of what the implications are.

To be clear, folks, that line refers to a URL that the CF web server connector (the .dll file loaded as an ISAPI filter into IIS or the .so file loaded as a module into Apache) will then use to call into CF, passing in various metrics about the state of the connector from the web server's perspective. And that info is then used primarily by the CF PMT (Performance Monitoring Toolset, which was new in CF2018). In particular, besides showing the MONITORING of that, it also uses that info for the auto-tuning of the connector offered by the PMT.

So sure, if someone wanted to say "you can remove that if you don't use the PMT", that may be so. (It's not clear if Adobe may use the "heartbeat" any other way.) But even then one should be cautioned that in doing that, it means that if they may LATER implement the PMT, then this connector monitoring and tuning would not work.

I often end up having to help people understand "why x doesn't work", and that very often starts with suggestions like this, which are offered tersely and without context. All this is why I made my first assertion. BKBK, I know you often chafe at my attempts to offer such clarifications. It often feels like we're in a battle, between our sometimes contrasting solutions to folks problems.

You may even feel you're "doing the people's work" by "keeping it simple". I'm just saying that if you may ever in the future offer that suggestion in point 2, you could help a whole lot by simply adding a parenthetical "(assuming you're not and won't use the CF PMT)". At least then it can clue folks in to being cautions about making that change too casually. 🙂

But back to Imad's original issue, I do hope somehow the rest of what you offer may help. If it does not, let us know, Imad. There may be still more we can offer. I'll hold off for now, in case you may have solved things.

/Charlie (troubleshooter, carehart.org)

Report · Dec 24, 2021

First, I don't see at all that the OP's problem will have anything to do with that.

By @Charlie Arehart

Which is in fact the reason why I suggested commenting out the setting:

# worker.cfusion.heartbeat_servlet_path=/__cf_connector_heartbeat__

This, incidentally, is a new property in ColdFusion. By the look of it (double underscore in name), it is still work in progress.

Anyway, I consider the rest of your remarks - about PMT, you helping 'people understand "why x doesn't work"', and the rest of it - irrelevant. If anything. the remarks only show that you and I think differently about software development.

Yes, I suggest commenting out the setting for a path used by PMT. So what? PMT is an optional module which you can connect to or disconnect from ColdFusion at will. No big deal. At least, not as big a deal as you have magnified. PMT is the least of our worries here.

The ship is adrift in mid-ocean. The engines have stalled. What I am suggesting is: start by finding the minimum set of things to do to get the engines running. The rest of the problems can then be tackled from there.

In software development terms, the agile way:

Find the minimum set of things you can do to get the application working. Do them.
Expect failure and errors. When you fail, fail fast.
Learn from failure and errors. Recover from them by looping back to 1.

Report · Dec 24, 2021

Well, unlike your point 3, your point 2 here wasn't indicated as an "experiment" but simply as something to "do", as if anyone would agree. It simply lacked some needed context.

As for the underscores those are NOT a reflection of the setting being "a work in progress". Instead, it's just a reflection of evolution in that connector heartbeat setting, whose value changed from just "connector" in cf2018. Adobe is trying to avoid conflict with a directory of that name which a user might have. To be clear, that url is called by the connector into cf whether you use the pmt or not.

Back to your proposing removing it, and to stretch your boat analogy, this seems like a passenger on a boat--that's run aground on a reef in a storm. He sees the crew throwing deadweight overboard, and wanting to help he comes across a sail rolled up which he figures is clearly not in use, so he tosses it over. Only he doesn't realize it would indeed be vital if its need did arise.

And worse, when that need did arise and the sail's found missing, the crew might very well blame the captain for not having ensured it was brought along in the first place. In this case, the captain is Adobe, who would have gotten blamed if someone seeing your suggestion (without any caveat) followed it and later DID enable the PMT, and tried to leverage its feature that relied on this.

Sure, these folks may never use it. Again, my point was mainly to offer the needed context before removing it. I get that people will try about anything when faced with a seemingly desperate situation.

As we do in all our help in the forums here, we each offer from our experience. No, it won't always be the same. Folks can consider our opinions and try to make the best decision for themselves. I was just trying to add to the knowledge base about this situation, on a couple of aspects.

Let's hope Imad does get the ship going again, with minimal impact on future use. And after a long couple of (log4j) weeks, let's hope we can all enjoy both the weekend and the holidays.

/Charlie (troubleshooter, carehart.org)

Report · Dec 29, 2021

Hello ,

Thanks you for your time and help sadly it doesn't work, the error is the same.

I share with you all files configuration:

# Where to find workers.properties
ot@sv-lcfextra-uat conf]# cd mod_jk.so
-bash: cd: mod_jk.so: N'est pas un dossier
JkWorkersFile "/etc/httpd/conf/workers.properties"
# Load mod_jk module
LoadModule jk_module "/etc/httpd/conf/mod_jk.so"
# Where to put jk shared memory
JkShmFile "/opt/coldfusion2021/config/wsconfig/shm/jk_shm"
# Worker File reload interval in seconds
JkWorkersFileReload "60"
# Where to put global jk logs
JkLogFile "/etc/httpd/conf/mod_jk_global.log"
# Set the jk log level [debug/error/info]
JkLogLevel debug

workers proprietes:

heartbeat_interval=30
heartbeat_limit=90

#Start of workers.properties associated with 'cfusion'

worker.list=cfusion

worker.cfusion.type=ajp13
worker.cfusion.host=localhost
worker.cfusion.port=8020
#worker.cfusion.heartbeat_servlet_path=/__cf_connector_heartbeat__

worker.cfusion.connection_pool_timeout=200
worker.cfusion.connection_pool_size=500
worker.cfusion.max_reuse_connections=500
worker.cfusion.monitoringsecret=49162e5a-c1dc-4d25-a560-d8056d02016d
worker.cfusion.secret=9661aacd-ac6f-42ad-8dd8-c371c366c641

#End of workers.properties associated with 'cfusion'

conf apache (in /etc/httpd/conf): in attachment

wsconfig:

#ColdFusion Web Server Configuration File
#Wed Dec 22 11:33:23 EST 2021
3=Apache,/etc/httpd/conf,All,"",/usr/sbin/httpd,/usr/sbin/apachectl,false,cfusion,"",bitness64
3.srv=localhost,cfusion

server xml:

sorry if i don't make good things i am beginner, it's my first time , i never installed coldfusion.

This installation was make in redhat 8.5

Have a nice day

Report · Dec 29, 2021

What happens when you do the following:

In server.xml, change from
address="::1" to address="127.0.0.1"
allowRequestAttributesPattern=".*" to allowedRequestAttributesPattern=".*"
On workers.properties, change from
#worker.cfusion.heartbeat_servlet_path=/__cf_connector_heartbeat__
to
worker.cfusion.heartbeat_servlet_path=/__cf_connector_heartbeat__
Restart ColdFusion.

Report · Dec 29, 2021

Hi,

When i had changed, i have this error now :

when i try to see my website

Thanks for us help

Report · Dec 29, 2021

to add when i launch the script named /apache_connectorslist.sh,

here the result

[root@sv-lcfextra-uat connectors]# ./apache_connectorslist.sh
Apache : /etc/httpd/conf (All)
[root@sv-lcfextra-uat connectors]#

and when i launch this script :

root@sv-lcfextra-uat connectors]# ./apache_connector_origine.sh
Could not find directory /usr/local/apache2/conf
[root@sv-lcfextra-uat connectors]#

Report · Dec 29, 2021

o=13)
[Wed Dec 29 14:37:29 2021] [2503:140611696396032] [error] ajp_send_request::jk_ajp_common.c (1829): (cfusion) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=13)
[Wed Dec 29 14:37:29 2021] [2502:140611491247872] [error] ajp_service::jk_ajp_common.c (3021): (cfusion) connecting to tomcat failed (rc=-3, errors=8, client_errors=0).
[Wed Dec 29 14:37:29 2021] [2503:140611696396032] [info] ajp_service::jk_ajp_common.c (3000): (cfusion) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2)
[Wed Dec 29 14:37:29 2021] [2503:140611696396032] [error] ajp_service::jk_ajp_common.c (3021): (cfusion) connecting to tomcat failed (rc=-3, errors=9, client_errors=0).
[Wed Dec 29 14:37:29 2021] [2504:140611696396032] [info] jk_open_socket::jk_connect.c (816): connect to ::1:8020 failed (errno=13)
[Wed Dec 29 14:37:29 2021] [2504:140611696396032] [info] ajp_connect_to_endpoint::jk_ajp_common.c (1158): (cfusion) Failed opening socket to
[Wed Dec 29 14:37:29 2021] [2504:140611696396032] [error] ajp_service::jk_ajp_common.c (3021): (cfusion) connecting to tomcat failed (rc=-3, errors=10, client_errors=0).

Report · Dec 29, 2021

Hi,

Instead of putting the 127.0.0.1 in address and in workers.properties host. Add your server hostname or IP address.

I don't think you need to comment the heartbeat in workers.properties.

server xml:

Workers.properties.

heartbeat_interval=30
heartbeat_limit=90

#Start of workers.properties associated with 'cfusion'

worker.list=cfusion

worker.cfusion.type=ajp13
worker.cfusion.host=Server IP address
worker.cfusion.port=8020
#worker.cfusion.heartbeat_servlet_path=/__cf_connector_heartbeat__

worker.cfusion.connection_pool_timeout=200
worker.cfusion.connection_pool_size=500
worker.cfusion.max_reuse_connections=500
worker.cfusion.monitoringsecret=49162e5a-c1dc-4d25-a560-d8056d02016d
worker.cfusion.secret=9661aacd-ac6f-42ad-8dd8-c371c366c641

#End of workers.properties associated with 'cfusion'

Thanks,
Priyank Shrivastava

Report · Dec 29, 2021

Another suggestion:

workers proprietes:

heartbeat_interval=30
heartbeat_limit=90

#Start of workers.properties associated with 'cfusion'

worker.list=cfusion

worker.cfusion.type=ajp13
worker.cfusion.host=127.0.0.1
worker.cfusion.port=8020
worker.cfusion.heartbeat_servlet_path=/__cf_connector_heartbeat__

worker.cfusion.connection_pool_timeout=200
worker.cfusion.connection_pool_size=500
worker.cfusion.max_reuse_connections=500
worker.cfusion.monitoringsecret=49162e5a-c1dc-4d25-a560-d8056d02016d
worker.cfusion.secret=9661aacd-ac6f-42ad-8dd8-c371c366c641

#End of workers.properties associated with 'cfusion'

server.xml

Report · Dec 29, 2021

thanks Priyank i will try your solution:

for information my mod_jk_conf :

# Where to find uriworkermap.properties
JkMountFile "/opt/coldfusion2021/config/wsconfig/3/uriworkermap.properties"
JkMountCopy "All"
# Where to put jk logs
JkLogFile "/opt/coldfusion2021/config/wsconfig/3/mod_jk.log"
# custom environment variables
JkEnvVar REDIRECT_URL
JkEnvVar REDIRECT_REMOTE_HOST
JkEnvVar REDIRECT_PATH
JkEnvVar REDIRECT_QUERY_STRING
JkEnvVar REDIRECT_HTTP_ACCEPT
JkEnvVar REDIRECT_HTTP_USER_AGENT
JkEnvVar REDIRECT_REMOTE_ADDR
JkEnvVar REDIRECT_SERVER_NAME
JkEnvVar REDIRECT_SERVER_PORT
JkEnvVar REDIRECT_SERVER_SOFTWARE
# Set the jk log level [debug/error/info]
JkLogLevel debug
# Select the timestamp log format
JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
AddHandler jakarta-servlet .cfm .cfml .cfc .cfr .cfswf
DirectoryIndex index.cfm
Alias /cf_scripts "/opt/coldfusion2021/cfusion/wwwroot/cf_scripts"
<Directory "/opt/coldfusion2021/cfusion/wwwroot/cf_scripts">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
RequireAll denied
<Files ~ ".hbmxml$">
</Files>

Report · Dec 29, 2021

i have always the same error , i see when i launch netstat -laputen :

Proto Recv-Q Send-Q Adresse locale Adresse distante Etat Utilisatr Inode PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 25281 1018/sshd
tcp 0 0 192.168.32.9:22 192.168.25.10:36760 ESTABLISHED 0 34035 1862/sshd: root [pr
tcp6 0 0 127.0.0.1:8015 :::* LISTEN 65534 39320 2668/java
tcp6 0 0 :::80 :::* LISTEN 0 36397 2805/httpd
tcp6 0 0 192.168.32.9:8020 :::* LISTEN 65534 38164 2668/java
tcp6 0 0 :::8500 :::* LISTEN 65534 38163 2668/java
tcp6 0 0 :::22 :::* LISTEN 0 25283 1018/sshd
tcp6 0 0 :::443 :::* LISTEN 0 36405 2805/httpd
udp 0 0 127.0.0.1:323 0.0.0.0:* 0 16284 989/chronyd
udp6 0 0 ::1:323 :::* 0 16285 989/chronyd
[root@sv-lcfextra-uat extra]#

it's normally that the tcp port use only tcp6?

Thanks

Report · Dec 29, 2021

Another suggestion:

workers proprietes:

heartbeat_interval=30
heartbeat_limit=90

#Start of workers.properties associated with 'cfusion'

worker.list=cfusion

worker.cfusion.type=ajp13
worker.cfusion.host=192.168.32.9
worker.cfusion.port=8020
worker.cfusion.heartbeat_servlet_path=/__cf_connector_heartbeat__

worker.cfusion.connection_pool_timeout=200
worker.cfusion.connection_pool_size=500
worker.cfusion.max_reuse_connections=500
worker.cfusion.monitoringsecret=49162e5a-c1dc-4d25-a560-d8056d02016d
worker.cfusion.secret=9661aacd-ac6f-42ad-8dd8-c371c366c641

#End of workers.properties associated with 'cfusion'

server.xml

Report · Dec 30, 2021

Thanks you very much for your time and help, you are fantastic!.

sadly it doesn't work, i have the same error:

[Thu Dec 30 04:51:14 2021] [10144:140284818798336] [error] ajp_send_request::jk_ajp_common.c (1829): (cfusion) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=13)
[Thu Dec 30 04:51:14 2021] [10144:140284818798336] [info] ajp_service::jk_ajp_common.c (3000): (cfusion) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2)
[Thu Dec 30 04:51:14 2021] [10144:140284818798336] [error] ajp_service::jk_ajp_common.c (3021): (cfusion) connecting to tomcat failed (rc=-3, errors=5, client_errors=0).

I don't know i speak about wrong port, my result of netstat -an :

[root@sv-lcfextra-uat 3]# netstat -laputen
Connexions Internet actives (serveurs et établies)
Proto Recv-Q Send-Q Adresse locale Adresse distante Etat Utilisatr Inode PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 25281 1018/sshd
tcp 0 64 192.168.32.9:22 192.168.25.10:37644 ESTABLISHED 0 198481 8027/sshd: root [pr
tcp6 0 0 127.0.0.1:8015 :::* LISTEN 65534 223069 9991/java
tcp6 0 0 :::80 :::* LISTEN 0 219840 10139/httpd
tcp6 0 0 192.168.32.9:8020 :::* LISTEN 65534 219758 9991/java
tcp6 0 0 :::8500 :::* LISTEN 65534 219757 9991/java
tcp6 0 0 :::22 :::* LISTEN 0 25283 1018/sshd
tcp6 0 0 :::443 :::* LISTEN 0 219849 10139/httpd
udp 0 0 127.0.0.1:323 0.0.0.0:* 0 16284 989/chronyd
udp6 0 0 ::1:323 :::* 0 16285 989/chronyd
[root@sv-lcfextra-uat 3]#

its normaly i see only ipv6?

i have a last question, its normally that i have 2 password different, in instance xml i have a other secret key?

a42560a4-c3f7-4291-ac6b-07542b8cfad3"

the path of files :

/opt/coldfusion2021/config/instances.xml

Report · Dec 30, 2021

I cannot see how this issue is related to passwords. So I would forget about passwords for the moment.

Your question about ipv6 is interesting. It just might be that Tomcat is failing to bind to IPv4 on your system. So, do the following:

Open /bin/jvm.config in a text editor.

Make sure that java.args includes the following 2 flags:

-Djava.net.preferIPv4Stack=true -Djava.net.preferIPv4Addresses=true

Restart ColdFusion.
Test successively (restarting ColdFusion before each test) with

worker.cfusion.host=127.0.0.1
<Connector ... address="127.0.0.1">

then with

worker.cfusion.host=localhost
<Connector ... address="127.0.0.1">

then with

worker.cfusion.host=192.168.32.9
<Connector ... address="192.168.32.9">

Report · Dec 30, 2021

Something else:

1. Reduce the connection timeout to match the jk settings. That is, use

worker.cfusion.connection_pool_timeout=60

and

<Connector ... connectionTimeout="60000" />

2. (If you haven't yet done so) Upgrade ColdFusion 2021's Java to the latest version (JDK 11.0.13)

Report · Dec 30, 2021

i will try , thank you so much! you are fantastic!

Report · Dec 30, 2021

it's more better, now i have this result with netstat:

Connexions Internet actives (serveurs et établies)
Proto Recv-Q Send-Q Adresse locale Adresse distante Etat Utilisatr Inode PID/Program name
tcp 0 0 192.168.32.9:8009 0.0.0.0:* LISTEN 65534 79377 5488/java
tcp 0 0 127.0.0.1:8015 0.0.0.0:* LISTEN 65534 84127 5488/java
tcp 0 0 0.0.0.0:8500 0.0.0.0:* LISTEN 65534 79376 5488/java
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18393 1027/sshd
tcp 0 0 192.168.32.9:22 192.168.25.10:37715 ESTABLISHED 0 28950 1869/sshd: root [pr
tcp6 0 0 :::443 :::* LISTEN 0 52841 4414/httpd
tcp6 0 0 :::80 :::* LISTEN 0 52831 4414/httpd
tcp6 0 0 :::22 :::* LISTEN 0 18395 1027/sshd
udp 0 0 127.0.0.1:323 0.0.0.0:* 0 18173 991/chronyd
udp6 0 0 ::1:323 :::* 0 18174 991/chronyd
[root@sv-lcfextra-uat conf]#

we can see that adding of arguments in jvm permit to open tcp v4 but i had the same error in my website (apache)

in the mod_jk.log, the error disappeared: the last error date of 20 minutes

[Thu Dec 30 14:05:25 2021] [4417:139921326905088] [error] ajp_service::jk_ajp_common.c (3021): (cfusion) connecting to tomcat failed (rc=-3, errors=748, client_errors=0)

Report · Dec 30, 2021

I have a question, it's normal to don't see in the result of my netstat-laputen: the port tcp 80 in ipv4 open?

Connexions Internet actives (serveurs et établies)
Proto Recv-Q Send-Q Adresse locale Adresse distante Etat Utilisatr Inode PID/Program name
tcp 0 0 192.168.32.9:8009 0.0.0.0:* LISTEN 65534 79377 5488/java
tcp 0 0 127.0.0.1:8015 0.0.0.0:* LISTEN 65534 84127 5488/java
tcp 0 0 0.0.0.0:8500 0.0.0.0:* LISTEN 65534 79376 5488/java
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18393 1027/sshd
tcp 0 0 192.168.32.9:22 192.168.25.10:37715 ESTABLISHED 0 28950 1869/sshd: root [pr
tcp 0 0 192.168.32.9:8500 192.168.25.10:37647 FIN_WAIT2 0 0 -
tcp 0 0 192.168.32.9:8500 192.168.25.10:37673 FIN_WAIT2 0 0 -
tcp6 0 0 :::443 :::* LISTEN 0 79760 5735/httpd
tcp6 0 0 :::80 :::* LISTEN 0 79749 5735/httpd
tcp6 0 0 :::22 :::* LISTEN 0 18395 1027/sshd
udp 0 0 127.0.0.1:323 0.0.0.0:* 0 18173 991/chronyd
udp6 0 0 ::1:323 :::* 0 18174 991/chronyd
[root@sv-lcfextra-uat conf]#

Report · Dec 30, 2021

it's ok!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! for the resolution of the error tomcat !!!!!

[Thu Dec 30 14:40:02 2021] [8061:140309166295360] [info] init_jk::mod_jk.c (4466): mod_jk/1.2.46 initialized
[Thu Dec 30 14:40:02 2021] [8061:140309166295360] [info] init_jk::mod_jk.c (4466): mod_jk/1.2.46 initialized
[Thu Dec 30 14:40:02 2021] [8065:140309166295360] [info] jk_log_version::jk_connector_version.h (21): Connector Version: 321158
[Thu Dec 30 14:40:02 2021] [8065:140308530083584] [info] jk_connector_CF_func::mod_jk.c (3979): CF heartbeat started
[Thu Dec 30 14:40:02 2021] [8064:140309166295360] [info] jk_log_version::jk_connector_version.h (21): Connector Version: 321158
[Thu Dec 30 14:40:02 2021] [8064:140308326971136] [info] jk_connector_CF_func::mod_jk.c (3979): CF heartbeat started
[Thu Dec 30 14:40:02 2021] [8066:140309166295360] [info] jk_log_version::jk_connector_version.h (21): Connector Version: 321158
[Thu Dec 30 14:40:02 2021] [8066:140308530083584] [info] jk_connector_CF_func::mod_jk.c (3979): CF heartbeat started

Report · Dec 30, 2021

i have one last error is that my web site is unavailable , when i lauch curl of the port 80 , i have this result :

[root@sv-lcfextra-uat bin]# curl -vvv 127.0.0.1:80
* Rebuilt URL to: 127.0.0.1:80/
* Trying 127.0.0.1...
* TCP_NODELAY set
* Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
> GET / HTTP/1.1
> Host: 127.0.0.1
> User-Agent: curl/7.61.1
> Accept: */*
>
< HTTP/1.1 503 Service Unavailable
< Date: Thu, 30 Dec 2021 19:42:58 GMT
< Server: Apache/2.4.37 (Red Hat Enterprise Linux) OpenSSL/1.1.1k mod_jk/1.2.46
< Content-Length: 299
< Connection: close
< Content-Type: text/html; charset=iso-8859-1
<
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>503 Service Unavailable</title>
</head><body>
<h1>Service Unavailable</h1>
<p>The server is temporarily unable to service your
request due to maintenance downtime or capacity
problems. Please try again later.</p>
</body></html>
* Closing connection 0
[root@sv-lcfextra-uat bin]#

THANKS!

Error Coldfusion 2021

1 Correct answer