Skip to main content
Serene_observer5E99
Serene_observer5E99
Inspiring
December 28, 2023
Answered

Color profiles for a specific printing plant

  • December 28, 2023
  • 2 replies
  • 7387 views

I've been searching all day and haven't found an answer that makes sense, so I've decided to post a question about my specific situation.

 

I recieved a pdf that was created by another studio. It was created/designed using Figma, then converted or imported to Illustrator (I assume, since I can open it in Illustrator). The studio creates designs primarily for digital devices, not for printing on paper, and communicating how to properly create a file that conforms with the printer's specs is not easy. 

 

When I open the file, I get a window that says the document has an embedded profile that does not match the current RGB working space (Fig. 1). First of all, this is to be printed, so it should not contain any RGB images (I assume that the window is indicating that the file contains imported RGB images).

 

So I click to use the embedded profile (several times), and the file opens. The printer requires that the pdf use the ICC profile "CGATS21_CRPC3". As you can see, the document info windows tells me that this pdf uses "US Web Coated (SWOP) v2 (fig. 2).

 

The printer sent the file back and said to change the profile to the correct one. What's the best way to ensure that the file uses the CGATS21_CRPC3.icc profile? Should I change the color settings in Illustrator so that the working space is using the correct color profile, then "assign the profile" to match the working space? Or should I leave the working space alone and just go to "assign profile" and use the drop down menu to select the correct profile?

 

Then, when I save as a pdf, is it correct to select "convert to destination (preserve numbers)" and choose the CGATS profile as the destination (as seen in fig. 3) ?

 

I am so lost when it comes to color profiles, and almost every tutorial I've found deals with RGB instead of CMYK and talks about setting it up for a laser printer instead of using the correct settings for a printing plant. It's really frustrating trying to figure out how to explain this when I'm not completely sure I understand it myself.

 

Also, when the file is converted to the correct CGATS profile, the color in some of the imported images changes, both on-screen and in the new pdf. I'm assuming that is because the original profile was created for coated paper and the correct profile is for uncoated stock--does that seem plausible? What would be the best way for the studio to create the file in order to see an accurate representation of what the final color will be while they are creating the layout?

 

Should all of the imported images be converted in photoshop to CMYK (using the CGATS profile) and then imported into Illustrator? Or would simply assigning the correct color profile in Illustrator be good enough?

 

I have been tasked with creating a checklist for the studio to follow, so I want to make sure I'm giving them accurate steps to follow. Sorry for the long post.

    This topic has been closed for replies.
    Correct answer Ton Frederiks

    I guess I am just not making myself clear.

     

    I have an Illustrator file. It contains vector elements that were created in Illustrator and also contains Photoshop raster images that were imported into the Illustratot document. All of the vector elements are CMYK. Most of the raster elements are CMYK, but a few of the raster images are RGB.

     

    The original file was saved as a PDF and was sent to the print vendor. The printer rejected the original  pdf because it wasn't saved using the color profile that the printer requires. The original design studio did not  understand what that meant or how to fix the issue.  So I was brought in by the production manager to see if I could correct the file so that it met the printer's requirements.

     

    When I opened the file in Illustrator, I found a number of problems, ranging from insufficient bleed to the wrong color profile being used. So I decided to correct all of the problems I found in the file.

     

    Ultimately, I made the corrections I thought were needed. My revised pdf was sent back to the printer and the file was accepted. One of the corrections I made was to change the imported RGB raster files to CMYK in Photoshop so that the Illustrator files contained only CMYK elements.

     

    When I changed the images to CMYK in Photoshop, I also converted the color profiles to match the profile that the printer required. After replacing the RGB raster images in the Illustrator file, I changed the color profile of the Illustrator file to the one required by the printer, then saved the file as a pdf.

    When saving the Illustrator file as a pdf, in the Output section of the pdf options there are 3 selections for color--Color Conversion, Destination and Profile Inclusion Policy. 

     

    The selections I chose were these: For Color Conversion, I selected "Convert to destination (Preserve numbers)."  For Destination, I selected the profile required by the printer (which is CGATS21_CRPC.icc). For Profile Inclusion Policy, I selected "Include Destination Profiles."

     

    As I said, the revised pdf that I submitted to the printer was accepted so evidently the changes I made corrected the color profile issue. My question is about whether the changes I made to the raster (Photoshop) images--i.e., converting the images to CMYK and converting the color profile of those Photoshop images to CGATS21_CRPC--were necessary and/or the most efficient way to correct the problem in order to ensure that the pdf I generated from the Illustrator file met the printer's requirement (using the correct color profile in the pdf)? Or could it have been accomplished by leaving the imported Photoshop images as they were (RGB and having a different color profile embedded in the images) and simply saving the file as a pdf, but using the color output options I described above?

     

    I have been asked to speak with the original design studio and instruct them on how they should save their pdf files so that they meet the printer's requirements. I want to know if the steps I described above were the most efficient way to revise the files or if I created additional work by unnecessarily changing the Photoshop files to be CMYK with the CGATS21_CRPC profile embedded in the images?


    Yes, that was not clear. You received a pdf file created in Illustrator with Illustrator capabilities checked and linked files.

    If the studio that created it had setup their Illustrator color settings correctly the file would have the correct profile.

    If you can educate them to setup their color settings, you would get a file with the right profile.

    Saving a CMYK PDF in Illustrator will automatically convert and embed images with the CMYK profile from the document. The conversion is the same as in Photoshop.

    Assigning a CMYK profile does not change the colors applied to vectors in a document.

    That could still cause printing problems. Check the black objects, are they black ink only or a CMYK mix? If Blacks have been converted previously, they could exceed the maximum total ink allowed by the cgats profile (around 230%).

    2 replies

    Ton Frederiks
    Community Expert
    Ton FrederiksCommunity Expert
    Community Expert
    December 28, 2023

    If you do not have to edit the file, I would do the conversion in Acrobat, it has the option to convert RGB Black to ink Black (instead of a mixed CMYK Black).

    Serene_observer5E99
    Serene_observer5E99Author
    Inspiring
    December 28, 2023

    The file is already in CMYK. And when I saved it as a pdf, I selected the options in the attached screen grab. Shouldn't that result in a CMYK pdf with the correct profile?

     

     

    Serene_observer5E99
    Serene_observer5E99Author
    Inspiring
    December 30, 2023

    Or did you Place the RGB file in a CMYK document?


    I didn't do anything--as I said earlier, this is a file that was created by a studio that has little-to-no experience with print production. So they are not very knowledgable or familiar with working with CMYK or the correct color profiles. Everything they design is for a screen, so CMYK color space is not something they've had much experience working with.

     

    The files were sent to me as a multi-page pdf. It is CMYK, but there are a few linked images that are RGB placed in the file. That's what the RGB alert was about (those placed images, not the entire document).

     

    Most of the elements are CMYK. I know that converting to CMYK when generating a pdf is a thing, but I feel more comfortable converting the images in Photoshop and relinking to those converted files so everything is in the correct color space.

     

    My main question is about the color profile for the pdf that will go to the printer. The print vendor says it needs the color profile for the pdf to be "CGATS21_CRPC3.icc". My question is do I need to assign that color profile to each placed image and then also indicate it as the destination when I generate the pdf? Or should I leave the individual images as-is and only concern myself with the color profile when I generate the pdf (as a last step)?

     

    I've been tasked with sort of teaching them how to correctly generate the pdf with the required color profile. Since I don't normally have to deal with creating a pdf that uses a specific color profile for my print projects, I just want to make sure I am conveying the information correctly.

    Monika Gause
    Community Expert
    Monika GauseCommunity Expert
    Community Expert
    December 28, 2023

    You received an RGB file - the document color mode is RGB. You need to convert this to CMYK with the correct profile.

    First of all: Your color management on your computer needs to be set up properly. You need to calibrate the monitor and set up the color in the system as well as in all the apps. There is a color management course on LinkedIn (not for free), which explains things pretty well. 

    The CMYK profile in Illustrator should be the destination profile that you want to use. The inten should be either Perceptual or Relative Colorimetric.

    When opening the RGB file, you may really want to use the embedded profile and not convert to your working profile. But maybe the other company really doesn't know what they're doing - in that case you're lost anyway.

    Then convert the document color mode to CMYK. Illustrator will then convert into the profile you want.

    Then you can only hope that everything they designed and the colors they used are printable.

     

    You have to always expect some color change when going from RGB to CMYK.

    Serene_observer5E99
    Serene_observer5E99Author
    Inspiring
    December 28, 2023
    quote

    You received an RGB file - the document color mode is RGB. You need to convert this to CMYK with the correct profile.

     


    By @Monika Gause



    That's not correct. In the screen grab, you'll see that the document color mode is CMYK.

     

    quote

    There is a color management course on LinkedIn (not for free), which explains things pretty well. 

    The CMYK profile in Illustrator should be the destination profile that you want to use. The inten should be either Perceptual or Relative Colorimetric.

     


    By @Monika Gause

     

    That sounds to me like word salad--I have no idea what it means. But I assume the course from LinkedIn will make it clear (fingers crossed).

    quote

     

    Then convert the document color mode to CMYK. Illustrator will then convert into the profile you want.

     

     


    By @Monika Gause



    I assume you mean when I save the file as a pdf (fig. 2)? Or do you mean I should assign a profile in Illustrator (fig. 3)?

     

     

    Terms & ConditionsAccessibility statement
    Using the community Terms of use Privacy Cookie preferences Do not sell or share my personal information ad choicesAdChoices