Copiar vínculo al Portapapeles
Copiado
This thread is now closed. Please update to LrC 14.x or LrD 8.x. If you wish to provide feedback, please go to the new article.
The recommended order for applying edits is:
Copiar vínculo al Portapapeles
Copiado
I have just worked through this very thing. I tried a number of approaches, being careful not to apply generative remove before masking, and had very little success with lines against a clear blue sky.
Copiar vínculo al Portapapeles
Copiado
Remove should be applied before masking otherwise you may see artefacts (e.g ghosts of removed object)
Copiar vínculo al Portapapeles
Copiado
Yes - should have said "being careful to apply ... before ".
Copiar vínculo al Portapapeles
Copiado
@default0j54qibpting: "I have just worked through this very thing. I tried a number of approaches, being careful not to apply generative remove before masking, and had very little success with lines against a clear blue sky."
Please attach here a full-resolution JPEG exported from the original *unmodified* photo, and include a full-resolution screenshot of your failed attempts. As with @Admirable_Wizard157F's example, we can probably figure out quickly some tips for making this easier.
Copiar vínculo al Portapapeles
Copiado
I took some time to read more of this forum and some of the article referenced here. My first attempt was to apply the remove feature to a raw file containing overhead lines, then convert it to a dng and continue the editing. Adjusting the contrast of the sky where the lines had been removed produced a darker outline of the original remove. By simply going back to the first step in the raw file and increasing the size of the area around the lines, the problem was solved in subsequent editing.
Copiar vínculo al Portapapeles
Copiado
@Admirable_Wizard157F, there have been a couple of other reports about this. Could you please attach here a full-resolution JPEG exported from the original unmodified photo so Adobe can reproduce the bad results.
Copiar vínculo al Portapapeles
Copiado
Here you go. I realize that trying to take out the cables supporting a cable car is suspect, but they are a mess as a result of the pano merge and so I thought I'd see what it looked like with them taken out. I was surprised at how hard it was to get rid of them with AI and how much the sky behind was messed up (per previous image upload).
Copiar vínculo al Portapapeles
Copiado
[This post contains formatting and embedded images that don't appear in email. View the post in your Web browser.]
With your uploaded image, which already had some removes applied and has some artifacts in the sky, it was straightforward for me to select the cables and remove them with the Generative AI option. Observations:
- Don't use Object Aware -- it doesn't recognize most of the cables.
- When selecting the cables, if you don't select all the cables from the right edge to the mountains, and don't select all the pieces of the cable that are touching and try to remove them one piece at a time, Remove will be too clever and generate replacement cables to match the bits left unselected.
Here was my first attempt:
But Remove hasn't quite matched the blue-sky-and-haze replacements, as you observed, and you can see faint outlines of the selections. There are several reports of that here.
In this case, I found that selecting most of the sky around the cables generated a replacement that more smoothly matched the remaining sky (and also got rid of the artifacts from your previous edits):
Copiar vínculo al Portapapeles
Copiado
Very good tool
Copiar vínculo al Portapapeles
Copiado
I was having a bit of an issue with the desk top untilI realized that my photo somehow had been cropped. Once I uncropped I had not trouble. It is awesome. See example.
Copiar vínculo al Portapapeles
Copiado
What I forgot to mention:
when selecting on any of my 3 machines (i7-9850H, 128 RAM, Quadro RTX 3000; 2x Xeon e5-2667, 128 RAM, Quadro M5000; AMD FX 8350, 32 RAM, GTX 980; all Win 10 x64) the selecting tool likes to stop working until I apply the edit. I can, after selecting the first are, only to a straight line or dot, with some delay, or not brush anymore period. After commiting the edit, it works again.
Copiar vínculo al Portapapeles
Copiado
Amazing! Thank you for this new feature. I do astrophotography, and removing satellite trails is difficult at best. The new AI-assisted Generative Removal is the perfect answer!
Copiar vínculo al Portapapeles
Copiado
It doesn't work,or I am doing something wrong. I select a shoulder on the edge of the picture that intrudes on a group photograph. It should be easy - the background is trees and sky. The generative Ai replaces it with a distorted shoulder.
Copiar vínculo al Portapapeles
Copiado
@DaHaLe255371: " I select a shoulder on the edge of the picture that intrudes on a group photograph. It should be easy - the background is trees and sky. The generative Ai replaces it with a distorted shoulder. "
See this article for how to remove objects more reliably:
https://www.lightroomqueen.com/generative-remove-replace/
Most complaints about Remove are addressed in the article. But if it doesn't help, please attach a full-resolution JPEG exported from the unmodified original photo, so we and Adobe can see the issue in detail. With nearly everyone who has posted a problem photo, we've been able to show how to remove the desired objects.
Copiar vínculo al Portapapeles
Copiado
Hi, my AI remove can't work😬
Copiar vínculo al Portapapeles
Copiado
You'll need to provide more information on what your trying to do and in what way it doesn't work. It would also be helpful if you uploaded a screenshot showing what is failing. Use the Insert Photos button (see attached) to upload your screenshot. This linked tutorial provides some tips on how to remove objects more reliably:
https://www.lightroomqueen.com/generative-remove-replace/
Copiar vínculo al Portapapeles
Copiado
Generative Ai was amazing at first, but now when I try to remove an object (ex. foot, branch, hand, ball) from my image, it replaces that with an Ai version of the same object (a different foot, branch, hand, ball, etc) instead of whats surrounding it (grass, dirt, rocks, etc). Quite dissapointed as this was expremely helpful for those moments I wasn't able to crop something out.
Copiar vínculo al Portapapeles
Copiado
Removing an object means painting over it, its shadow, its reflection, and any non-contiguous pieces. If you leave behind a shadow, a reflection, or a disconnected piece (e.g. a hand on a shoulder), the AI will attempt to create something to cast the shadow, reflect, or complete the unbrushed discontinuous item. You can avoid these issue by following the guidance provided in this linked tutorial. https://www.lightroomqueen.com/generative-remove-replace
Copiar vínculo al Portapapeles
Copiado
It would be great if you could circle an object with the heal tool and automatically fills it with the selection. This could make in initial selection more precise and save time with brushing around to cover large areas.
Copiar vínculo al Portapapeles
Copiado
Definitely, but if so, only combined with a keystroke - Ctrl, Alt or something. I have to revove tons of fine hair spreading around on ears etc with a fine brush, having that auto fill might be catastrophic
Copiar vínculo al Portapapeles
Copiado
Bien compris
Copiar vínculo al Portapapeles
Copiado
I can't seem to select the 1st variation with the enter key - after I move through the variations the enter key will select the variation I have open. I'm using Classic on Windows 11. This is truly an amazing feature!!
Copiar vínculo al Portapapeles
Copiado
This feature is legit the best thing i have ever seen. I am a long time LR user, and wedding photographer. Being able to remove people in photos (guests taking photos down isle, second shooter, etc) is UNREAL.
Copiar vínculo al Portapapeles
Copiado
Incredibil. Super instrument
Copiar vínculo al Portapapeles
Copiado
I mask out things to rempve like lamp posts and the corners of unwanted buildings, and I get variations on what is there. Please include a REMOVE option to make it clear to the AI what I want. As it is, the feature is very very hit or miss in removing unwanted elements of my photos.