Copy link to clipboard
Copied
Hello,
While compiling Help in ReboHelp 8, I've encountered the following problem: after each compilation there is one or several blank topics in my Help - each time different. For example, after one compilation, the first topic contains only the title and no content and the other topics are ok; after the next compilation, the first topic is no longer blank but one of the others becomes blank.
Did anyone encounter the same problem or has any ideas how to solve this problem?
Thank you,
Kate
Hi Kate,
I was also facing the same problem with the blank topics in the Webhelp output and found the solution to it. It's because of the antivirus software. One of the antivirus software's tools used to scan all newly-created files instantly, which was interfering with the Webhelp generation. Once I turned off that tool, this issue was resolved. So you can either turn off the antivirus completely or just this specific antivirus utility.
Regards,
Ritesh Pai
Copy link to clipboard
Copied
Welcome to our community
Unfortunately we have nothing much to offer you at this point but more questions.
All we know at this point is that you are using RoboHelp 8. What we don't know is the following:
RoboHelp 8 has two service release patches. Each must be installed in order. Have you installed those patches?
RoboHelp 8 comes in two flavors. RoboHelp for Word and RoboHelp HTML. Which "RoboFlavor" are you using?
RoboHelp8 is capable of producing many different output formats. HTML Help (Compiled CHM), WebHelp, FlashHelp, AIR Help, JavaHelp, Oracle Help, WebHelp Pro, FlashHelp Pro. Which output format are you producing?
RoboHelp 8 output may be viewed in a variety of ways. Clicking preview, viewing in the Web Browser, etc. How are you viewing?
RoboHelp 8 output may be placed in a variety of places. Network drives, Thumb drives, External Hard drives, CD-ROM, DVD-ROM, Web Servers. Where is your output being viewed from when you are seeing this issue?
Does this issue manifest with ALL output types? Or is it specific to one output type only?
Cheers... Rick
Helpful and Handy Links RoboHelp Wish Form/Bug Reporting Form Begin learning RoboHelp HTML 7, 8 or 9 within the day! |
Copy link to clipboard
Copied
Hello Rick,
Here are the answers to your questions:
Thanks,
Kate
Copy link to clipboard
Copied
Hello again Kate
Sorry for the delayed reply. I was stuck in PowerPoint purgatory for many hours yesterday chasing a problem!
For the topics where you don't see content, have you examined the HTML page to see if the content is actually there?
Admittedly I'm grasping a bit at straws here. But it almost sounds like we are dealing with a CSS issue. If you examine the HTML page using something like Windows Notepad, it should tell us whether the content is there or not. And if the content is there, it means some other action is hindering display of the content. But if the content isn't present, we need to examine more on the RoboHelp side.
By chance are you using Build Tags? That could also account for it.
Cheers... Rick
Helpful and Handy Links RoboHelp Wish Form/Bug Reporting Form Begin learning RoboHelp HTML 7, 8 or 9 within the day! |
Copy link to clipboard
Copied
Hello Rick,
I've examined the pages which appear blank in the Help. When I opened the HTML files of these topics they were also blank and of 0 KB size.
The conditional build tags are in the template but currently I don't use them because I'm producing the sole output - Web Help.
Thanks,
Kate
Copy link to clipboard
Copied
I notice you answered one of Rick's questions with "I'm viewing the output from the hard disk of my PC".
The question was where is the source project which could be different so can you confirm that project, not just the output, is on your hard disk?
See www.grainge.org for RoboHelp and Authoring tips
Copy link to clipboard
Copied
Peter,
The source project is also there - on the hard disk of my PC.
Thanks,
Kate
Copy link to clipboard
Copied
After you generate the webhelp and find you have these empty files, are you correcting that before you try again?
How big is this project zipped up?
See www.grainge.org for RoboHelp and Authoring tips
Copy link to clipboard
Copied
Peter,
There's nothing to correct in those topics which are generated blank. They are complete in the sources, they are blank only in the output. When I regenerate Help for the second time, they appear ok and complete, but the other topics become blank.
Any ideas why it is so?
Thanks,
Kate
Copy link to clipboard
Copied
With you now.
Inadequate or corrupt memory can cause 0kb files to be created but it's likely you would have problems with other applications. Can you try on another machine as even if this is not the problem, it could help pinpoint the installation as the problem?
How big a project is this?
Are the blank topics deep down in the TOC?
How many levels does the TOC go to?
See www.grainge.org for RoboHelp and Authoring tips
Copy link to clipboard
Copied
Peter,
The same problem appears on the projects of other members of my team. Empty topics can appear randomly, no matter how deep in TOC they are. The project contains about 400 files of size no more than 15 KB. The TOC has 3 levels.
Thanks,
Katya
Copy link to clipboard
Copied
I take it you mean other team members get the same problem when they generate rather than you get the problem if you generate their projects.
Is source control involved here?
See www.grainge.org for RoboHelp and Authoring tips
Copy link to clipboard
Copied
I mean that some TechWriters from the company I work for accounter the same problem with blank topics when compiling WebHelps for their projects. I'm using svn, but it has nothing to do with their projects.
Copy link to clipboard
Copied
If they are using source control as well, it could be that something about the workflow you are all using is behind this. I'm more inclined to thinking it is a source control problem than a project problem.
Try one of the sample projects and see if you hit the same problem there. Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
Assuming you don't, that is a further pointer to source control being the problem.
I would also try generating a CHM from your project on the basis that the results will help.
See www.grainge.org for RoboHelp and Authoring tips
Copy link to clipboard
Copied
Hi again,
I've tried to compile the .chm file out of the source files - no empty topics. The same when compiling WebHelp out of the sample project - no empty topics.
Still, I don't think the problem is in the source control tool because all the files I use are checked out and reside on my PC hard drive. The output folder of the project is not committed at all. That's why, the source control tool should not influence the output at all.
Any other ideas, what is the problem hidden in?
Thanks,
Kate
Copy link to clipboard
Copied
So your own project is OK with a CHM and the sample is OK with webhelp. It's just webhelp from your own projects. Did you try generating to a different location on your hard disk?
See www.grainge.org for RoboHelp and Authoring tips
Copy link to clipboard
Copied
Hello again
I tried to export the source to the folder on another drive on my PC. So, when the folder was already not under SVN and was on another drive, I deleted all the previous output files, so that the output was empty and tried to recompile the Web Help again - now from the other location. Unfortunately, it did not help either - still blank topics are found after compilation
The only way I found to get the Help without blank topics is to compille the Help several times saving it each time to the new direction. After each next compilation different other topics become blank and the previous become ok. So, I replace the .html files of the blank topics in the output of the originally compiled Help with the topics of the further compilations which are no more blank.
Do you know any simpler ways?
I'd be very grateful for any other ideas
Copy link to clipboard
Copied
I tried to export the source to the folder on another drive on my PC.
You confirmed before you are working from your hard disk but the above sounds more like a network. Have you tried with the source in C:\Test?
See www.grainge.org for RoboHelp and Authoring tips
Copy link to clipboard
Copied
Peter,
Exactly, I work from the hard disk because the sources are checked out to my PC.
In the reply above I described the procedure of exporting the sources. That is, I disconnected them from the source control tool. So, I tried to compile Help from the copies of the source files (not under source control) in the Temp folder (not under source control) on my D drive.
Thanks,
Kate
Copy link to clipboard
Copied
Can you share the project with me? See the Contact Page on my site.
See www.grainge.org for RoboHelp and Authoring tips
Copy link to clipboard
Copied
Sorry, I can't, signed the privacy agreement...
Copy link to clipboard
Copied
Correct me if any of the following statements are wrong:
I am not seeing how that can be anything other than your projects or source control or your environment. You have removed one project from source control and it makes no difference so that leaves the projects themselves or your environment.
If you create a new project on your C drive (I emphasise C drive) and import some topics, see if they still go wrong when you generate. Keep importing until something goes wrong. Import a limited number each time so that if it is topic related, you can see when it goes wrong. Do not use source control on this project. Instead create a copy of this project and check that into source control. By checking periodically you may find a point at which the standalone copy works but the source controlled copy gives the problem.
Of course there are easier ways but if your management / client will not agree to let me have a copy, I cannot see what happens when I generate. That would instantly give us some clues.
Perhaps it will help if you explain that Adobe only recognise about six people worldwide as Adobe Community Professionals and not one is going to risk losing the value of that recognition by making anything public. So unless you have the recipe for Kentucky Fried Chicken, it's a much easier way to go.
I would like to help you more but without being able to replicate the problem, there's not much I can do.
Please let us know how you get on.
See www.grainge.org for RoboHelp and Authoring tips
Copy link to clipboard
Copied
Hi,
I am facing the same problem.
Were you able to find any permanent solution?
Thanks,
Garima
Copy link to clipboard
Copied
Hello Garima,
We found no permanent solution to this issue. It seems to be a RoboHelp bug that appears under certain conditions...
However, we've elaborated a workaround:
1. After first WebHelp compilation, I copy the output to some temporary location on my PC.
2. Compile the WebHelp for the second time.
3. Replace the empty HTML files in the Output temporary folder with the good files from the second compilation.
Sometimes, some blank files from the first and second compilation output remain blank. So, I recompile the WebHelp as many times as needed to replace all the blank files in the Output folder that is in the temporary location. Once done, I replace the Output folder from the last compilation with the Output folder that I copied to the temporary location in step 1 and which now contains all good files.
I know, the process is not convenient at all; however, it is better than nothing
Regards,
Kate
Copy link to clipboard
Copied
Hi Kate,
I was also facing the same problem with the blank topics in the Webhelp output and found the solution to it. It's because of the antivirus software. One of the antivirus software's tools used to scan all newly-created files instantly, which was interfering with the Webhelp generation. Once I turned off that tool, this issue was resolved. So you can either turn off the antivirus completely or just this specific antivirus utility.
Regards,
Ritesh Pai