Adobe Media Encoder

Hi there! We have a slight problem at work.  We rendered some compositions to ProRes 422 HQ last week, and today we opened up the same project to render some more compositions. When the renders was done we realized that the gamma of the new renders seemed off compared to the old ones.When we look at the old renders they are reported as: ProRes 442 HQ HDTV (Rec.709) Y CbCr.And the new renders are reported as: ProRes 442 HQ Rec.709 Gamma 2.4 Y CbCr. Both renders where rendered from the frame After Effects project, using the default ProRes 422 HQ preset in Media Encoder. I and my colleagues have looked through the settings in AE and Media Encoder numerus times, but we can't find any differences between then and now. What we have tried so far:-Render it on different computers(Win 10 x64 Ryzen 1900X RTX 2080 TI, Win10 x64 i7 6800k GTX 1080 TI and a Mac Pro 2016 with latest MacOS.-Render with and without GPU acceleration-Render with and without "Render

Witam, próbóję wyrenderować video w rozdzielczości 3840x2160 w 60 klatkach. Przygotowałem sobie projekt, klikam na File ---> Export ---> Media. Wybieram format H.264 Preset: Youtube 2160p 4K Ultra HD, i teraz mam problem z ustawieniem rozdzileczości, width jest ustawiony domyślnie na 2720 a height na 1530. próba ustawienia wartości chodż o +1 kończy się komuniaktem : Invalid framesize/framerate for this level. Please Lover the video bounds or frame rate, or increase the Profile and Level and try again.Jak w tym programie wyrenderować film dla youtube o wartościach 3840x2160 @ 60 ?

I keep getting this export error message when I export on Media Encoder but when I export directly from Premiere Pro everything exports fine"Accelerated Renderer ErrorUnable to produce frame....Around timecode: 00:20:46:14 - 00:20:46:23Error code: -1609629690" Why does it work on Premiere Pro and not Media Encoder? My drivers are updated and I mean if it works on Premiere Pro why wouldn't it work on Media Encoder?

When I export out of AE to ME, I keep failing and getting this error below.  Both programs are up to date.  Any advice? - Encoding Time: 00:00:4609/19/2019 04:20:38 PM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Render ErrorRender returned error.Writing with exporter: H.264Writing to file: \\?\C:\Users\Doug.Pomietlarz\AppData\Local\Temp\Untitled Project_AME\Segment_12.mp4Writing file type: H264Around timecode: 00;00;00;24Rendering at offset: 0.000 secondsComponent: H.264 of type ExporterSelector: 9Error code: -1609629695

After allowing my PC to update last night, both windows and a few drivers as well, Media Encoder no longer recognises my GTX 1060 as a Hardware Encoder. It's locked to Software.The renderer option still lets me set it to CUDA and after effects still uses the GPU without issue but I can't render through Media Encoder with it. Which breaks several effects if I let it render with CPU only.Just wondering if anyone knows a fix for this or if it will likely just go away when my RTX 2080ti arrives in the next few days.Thanks in advance.And for anyone questioning why I would be upgrading from a 1060 to a 2080ti rather than any other card... I sold my 1080ti to buy it. I've been stuck on a 1060 for a month now. I wasn't exactly expecting a 3 week delay when I ordered one.

Hello all, I wanted to ask if there's a way of defining when a watermark appears. For many projects clients want a watermark for a period of time but not right until the end. Is there a way of defining in and out points?Many thanksSimon  

Hi How does one go about exporting with GoPro CineForm codec, but still have the same colors I have in After Effects? Whenever I export the colors are a bit saturated.

I'm trying to use Media Encoder CC 2018 (version12.1.2) to export my AVCHD clips to Pro Res 422 for editing in Premiere.  Unfortunately there are no Pro Res presets under Quicktime.  I had just updated my Creative Cloud apps to the most updated versions of Media Encoder and Premiere for my system (I'm on an older macbook pro). I also tried selecting CUSTOM, then selecting Pro Res options under VIDEO, but nothing will export. Are there bug/fixes or pro res presets I can download?  Thanks!   

Dear Adobe, You really need to support BM raw in Premiere, Encoder and AFX. Enclosed is a screengrab from your own website. Thanks,Markus Strömqvist 

Hii don't find the possibility to choose the LZW Compression by exporting a Tiff sequence. The files are to Big (Pro frame about 8 MB)Where is it? It is hidden?

I am trying to automate the rendering process using templates, extend-script, and apple-script. While running the command:   app.project.renderQueue.queueInAME(true);   My project gets transferred to Adobe Media Encoder from After Effects and the rendering process starts with the same configuration as the last render. The render time may vary depending upon the complexity of the render. The function queueInAME( ) returns nothing back. Is there any way to know when the rendering task has finished or if there came any errors in the process? Is there a callback method which might enable this?

Is it possible to edit the time between checks? I think its 30 seconds now. So for instance it could check the watch folder every 5 seconds?Title was edited by: Mod

Hi, I'm trying to export a prores 4444 with alpha from After Effects. Under the Quicktime Format there is only GoPro, NTSC and PAL presets. Codecs have cineform and DnXHD too, but no ProRes. I thought it was supported now?Cheers!

Hi everyone,I'm in the middle of a huge editing project involving dozens of short videos (30"-2') and I tried queueing them so as to continue editing other videos during the rendering. Everything went fine until I noticed that some of my titles have their original font replaced.When I export my videos directly from Premiere, I don't have any issues; it only happens when using AME. I read every post regarding this issue and followed every suggestion (clearing the AME and Premiere Media Caches, reinstalling the fonts, restarting the computer, and even unchecking the "import the sequences natively" in AME, but to no avail.Any leads?thanks!

When I turn Glow effect on in After Effects I getAccelerated Renderer ErrorUnable to produce frame.-If I turn glow off it renders.Anyone know why? [Mac Pro 6 core]The same project file I worked on 2 months ago worked fine through Encoder.I'm also getting weird bugs where older project files now takes 30mins-1 hour to render 10 second videos where as 2 months ago they took less than 30secs. (through Encoder)Title was edited by: Mod

Hello, I am attempting to convert some .vob videos. I have tried multiple formats, but every converted video has no audio. I have seen a lot of discussions on this forum about similar situations, but have not managed to fix my problem. I am hoping for some advice more specific to my situation. I am using AME CC 2018. This is my first time using the program so I cannot give too much information about how it has worked for me in the past. I converted a wmv video in order to see how that would work and that converted video does have audio. That makes me think the problem might lie with the vob videos I have, but I do not know what problem that could be. Any help would be greatly appreciated!

Hey there..I run into a problem when AME doesn't export my project with my chosen color grade on adjustment layer, or even any of the LUTS.Well then i researched and Unchecked "Import sequences natively" in ADE, and that helped with my LUTS and color grade problem. But then it doesnt apply any of my captions that i wanted to be burned on my video. I have checked all the boxes that it should burn them in but still it doesnt, and immediately when i check "Import sequences natively" magically, LUTS, color grade is gone but Captions are back on ....I send my projects from Premiere to AME.Can someone please help me... Thanks

Hey guys, so i have been having an issue where media encoder, premiere, will be fine exporting/transcoding almost all clips, but certain clips make it essentially freeze about halfway through the export. Two examples:- I have 4 separate wedding video projects with separate folders of footage from each camera.  I went to Transcode all of the footage into Proxies, and one of them worked perfectly, transcoding all of their footage into proxies successfully.  But then it arrived at Wedding #2, and it hitched and didn't make any progress and the software froze.  So then I tried re-oppening and exporting again, same issue.  So then I tried exporting directly from Premiere Pro, same issue.  Then I tried dynamic linking to After effects, also same issue. - Also I had a sequence with only 2 clips in it, and wanted to export it as a .MOV, and the same problem as above was happening.  Then I went to play the video in Prem,iere, and it kept freezing at the same frame

Hi,I am working a lot with HAP codec. The new HAP-Export from adobe doesn't work proberly. It doesnt include the alphachannel. I tried HAP alpha, HAP-Q alpha and Hap only. No alpha channel.I am on Mac.Anyone with that problem?

i have media encoder installed hereC:\Program Files\Adobe\Adobe Media Encoder CC 2019and getting AEGP Plugin error?However i only get this error message in AE CC2015 works fine with AE CC2019another problem is, when i open manually from AME, i have some elements missing.suppose to be look like thishelp me please!

Ultimately, I'm trying to create an ingest preset so that when I bring footage into Premiere, it will create proxies. I compared a handful of codecs (Prores Proxy, Dnx, Cineform) and none of them come anywhere close to h.264 when it comes to image quality and file size. They all create files that look worse while taking up ten times as much space as h.264.The problem is my footage (Alexa Mini) has five channels of audio, and apparently h.264 does not support five channels of audio. All of the channels are blank audio from the camera, so I don't care about them, but Premiere will not ingest the footage using an h.264 proxy codec because the audio channels do not match.Am I missing something here? 1. Why do video codecs even have varied audio options? 2. Why does h.264 not support five channels?From looking at older threads, it seems like this was totally doable two years ago before they changed the export settings around. You could choose to export a Quicktime, then just pick the H.264

Hi all, I apologize if this question has been answered already, but I couldn't seem to find it. I recorded alot of footage on my GoPro Hero 7 Black in 4k60fps while on vacation and I'm looking to edit it. However, since the GoPro Hero 7 Black shoots in H.265 HEVC it would be resource heavy to try to edit it directly in Premiere Pro. I've decided to convert the footage over to a editing friendly format such as ProRes 422. However, after a successful conversion playback is extremely choppy, image quality seemed to be retained, but the framerate is somewhere on the line of 15fps or less if i were to guess. I've read somewhere that the footage may be variable and confusing the encoder, however using a MediaInfo application my footage is indeed constant. Perhaps my PC specs could assist in finding a solution or determining a bottleneck:CPU: i7-9700k @4.7GHzGPU: Nvidia GeForce RTX 2070RAM: 32gb @3000MhzThe footage is located on a Western Digital Black 2TB HDD 7200RPM. Perhaps the slow hard d

Hello;I am getting the following message in AME"Export ErrorError compiling movie.Accelerated Renderer ErrorUnable to produce frame.Writing with exporter: H.264Writing to file: /Volumes/Samsung_T5/VID_20190801_120917_10_245.mp4Writing file type: H264Around timecode: 00:01:57:09 - 00:01:57:10Rendering at offset: 117.417 secondsComponent: H.264 of type ExporterSelector: 9Error code: -1609629695" The clips are movie Insta 360 one X and have been applied the GoPro VR Plugin VR Reframe plus Lumetri Color. I am rendering in GPU Acceleration Metal. Any 360 shooters have run into the same issue? Please advice

I can't get AE to export to AME. Nothing happens at all. AME doesn't open and when I open it manually the comp doesn't transfer to the program. Another problem I'm having is when I render inside AE the file is gigantic. I have exported files before that were in the MB's but this latest video I rendered inside AE was over 5gb. I'm very curious about what the problem is. There is no update waiting to be had either.EDIT: I'm trying to render to AVI if that matters.

Rendering out of After Effects... Every attempt stops working at the same frame about halfway through. The Fan on the Macbook Pro cranks up and the estimated time just keeps going up. Not sure how to even begin troubleshooting this one. Rendered same comp this morning without any problems...