Adobe Media Encoder

I have been slowly figuring out how to do things with Premiere and learned I can encode my footage with media encoder so the edit is a lot smoother. My question is how do I know what dnxhd setting to encode my footage in? When I was making a new preset to do it there are a bunch of dnxhd settings like 10 bit, 12 bit, 444 how do I know which one to use?  Thanks

I have a huge video in .iso format (50 GB) that I want to convert into a compressed .mp4 and I was hoping that Media Encoder could do this, but apparently it's more complicated than that. Does anyone know of a way to turn an .iso video into a smaller .mp4?

I've been capturing old home movies which is a chore, especially Type C VHS. I capture them in Premiere after setting up a folder and file name that represent the project I'm doing.  I capture a video, trim it up, put fades in and out, crop the VHS head switching noise off the bottom and a little off the sides and top as well. Then I set an in and out point and hit cntrl M to export to AME.I see the video picture in AME and set my destination and other factors and I'm ready to send it to the Queue.  I do this to about twelve titles and then I run the cue by hitting the green arrow in the top right hand corner.  It starts processing right away and I think, hurray this queueing up thing is great, until I notice that my watch screen at the bottom, has no video but a red screen that says "no media present."  What is that about? Where the hell is my media, I just saw it in the source screen for AME, did it just disappear?Well, I cancel that run, do exactly the same proce

Hi everyoneSo I made a film and basically I now want to burn that film onto a DVD. The film is in 1080p and my question is what settings do I need to use in the Media Encoder so that, once burned on the DVD, the film will play from any DVD player?Thanks in advance!Greetings from Switzerland

Hi so all im rendering is a background with 1 hour worth of songs so i was just wondering if i could render it in 1fps to see if it could render any faster then 3 hours

I have files nested into an organizational hierarchy.I want to transcode these files into a destination folder that then recreates the hierarchy.For example:SOURCE --> A CAM --> A001 --> Take1, Take2SOURCE --> A CAM --> A002 --> Take1, Take2would transcode to:TRANSCODE --> A CAM --> A001 --> Take1, Take2TRANSCODE --> A CAM --> A002 --> Take1, Take2Is there a way for this to happen automatically, without me having to manually create the folder structure on the destination side, and direct each source to the corresponding destination?Thanks!

I've searched for improving resolution regarding Media Encoder.They said Media Encoder couldn't get a resolution beyond 4K. then, I thought a 1080p video can be converted to 4K.However, Video quality seems to stay in 1K although i changed settings before encoding it.Was i misunderstanding anything ? I couldn't get resolution higher than original ?Of course, my monitor is 1080p but, a converted videos didn't show a best quality this monitor can express.

I've come across some old quicktime prores 422HQ outputs created in FCP7 and when I try import them into AME CC 2017.1.2 I get an error saying the video codec is not supported.I'm on an iMac 5k Retina (late 2014) running Sierra 10.12.5.I can play the files using quicktime, vlc, mplayerx etc with no problem whatsoever. I can even drop them into mpeg streamclip without any issues.Has anyone come across this before or have a fix for this?Thanks

Hey everyone,I have an UHD sequence in Premiere I want to render into 1080p MXF DNxHR HQX 10-bit. But for some bizarre reason, only the upper left corner of the UHD source is shown (in full res) in the 1080p output preview. Changing "Source Scaling" does nothing to change this. Once I start rendering, in the rendering preview window, the UHD source is scaled as it should be. But I would like to know why the output preview isn't working as it should. Any ideas?

Al intentar instalar codecs para media encoder, da error: Póngase en contacto con su administrador si desea aplicar las actualizaciones en su equipo. El administrador ha suprimido las actualzaciones.Gracias por la ayudaLeo

Hi,Transcoding an HD 1080 10-bit YUV 30" spot to DV PAL is taking 15 minutes. This is completely irrational on a high specs computer. In comparison, transcoding the same clip on earlier version took under 1 minute.Anyone else noticed the problem?Thanks,Hazem

Is there any way to Save the In & Out points in Presets?This is a vital feature available in Episode and as I transition to Media Encoder I sorely miss it.Thanks.

Hello! I've just tried a trial of Animate CC + Adobe Media Encoder.I have a very simple task to make an animated GIF out of my .fla file.But when I try making that in AME I cannot(!) make a single animated GIF. It always gives me a sequence of gif images. But I need a single file (just what good old Flash could do via it's Publish menu).So my question is: how can I export a single gif animation?Thank you.

I'm working on Premiere 5 and media encoder 5, when exporting to AVI or MOV I don't have the progressive option in field order, but on my Premiere 4 I do have that option, anybody know what is the reason for this and how to resolve? I want to use the DV codec FYI. Thanks in advance.

I have moved a QT Movie into a watch folder. The queue appears and the status is selected as "Automatic". Then nothing happens....The controls above only offer "Stop" and "Pause" I have it set to "Auto-Encode Watch Folders". The encoder presets are all greyed out and only the output file column is activeThis watch folder works normally when I use it with Premiere. The QT movie in question was created in another NLE, but was encoded as ProRes422. I have dropped other QT movie into the watch folder with the same result...The status never changes from automatic. Anyone have any suggestions?

Trying to convert MP4 to AVI, but there is no AVI choice in the format dropdown. Everything says it will export AVI. What am I missing?

Still using settings from previous updates. However now it renders out and only music in clip is audible. Other audio channels are barely audible.

Current project has a ton of .MOV files I am trying to render from a 1.33 pixel ratio to a 1.0 I know how to do that but the problem is it is only allowing about a quarter of the clips in. They are all the same. From the same camera from the same day even of the same person. What could be causing it to hiccup like this?

Hello,Does anyone know how many watchfolders can Adobe Media Encoder monitor?In my current workflow (using a different software) I have about 360 different watchfolders/different transcoding workflows.Thank you

None of my Premiere and After Effects project files seem to be loading in Media Encoder.I like to use Media Encoder for the Youtube and Vimeo presets.Ive tried ME2015 and ME2017.Is it just buggy?

I have a 4K timeline using the S-Log 3 LUT and some other minor color corrections, and when I send it over to Media Encoder the LUT is being dropped and the final video looks just like it did coming straight out of the camera. Has anyone else experienced this issue? And what was the fix?

For 2 years I worked with a Win7/i5-337U/6GBddr3/GeForce GT730M Notebook, not updated drivers/software, with rendering 10 to 20 hours in my projects (videos from canon T5i, .mov) and never had this problem.I bought it, 3 weeks ago, a new notebook (Clevo Notebook Win 10/i7-7700HQ/16GBddr4/GeForce GTX 1060), all updated drivers, all updated adobe software and I'm having memory leak problems with the same type of projects, 40min video from canon T5i, .mov, with color correction, render to mp4 h 264.I searched here in the forum and saw recommendations, change performance for memory, increase virtual memory for 40 gigas... and the problems continue.Is there any definitive solution?

That is not sense, You cannot attached the proxi because the audio does'nt match,even if I tried to match the 8 channels audio....ridicolous! I need to download Da Vinci to do that.

Hi there,i'm stuck with the following issue:I want AME to encode proxies. After I selected the clips in PP and imported them into AME they show up in the queue as they should.Everything works like it should - only problem: AME renders out the first file and then just stops. This way i would have to select each file of the queue one after another to let AME encode them. I just want it to encode the whole queue..I am not a very advanced user of AME, maybe someone knows what's wrong for me? I am using Premiere Pro CC2017 and the Media Encoder CC 2017.Help would be so great! Thanks!

Hi, when we try to ingest multiple clips of a P2 card and select "stitch clips", the order of clips gets messed up. I read this article: Learn about & get started using Adobe Media Encoder - here I am told that the order can be changed by drag & drop.This is not a real option with 50-100 clips on single card. Our editors rely on the order, which should be chronological (clip's creation timestamp). With Prelude, this was never an issue, so I hope there's also a way to accomplish that with AME, too. Thanks.