Media Server (read-only)

I am trying to log into the Adobe Media Server Admin console. I am not trying to open it up from the AMS itself, and instead I am opening it from by desktop outside of the sever. I can see the AMS homepage, and I can click to launch the admin console. I am using the user named amsadmin and the password I gave it when i first created the AMS instance and logged in using a terminal session. It asked me to add a password for amsadmin and i gave it one. Now, when I try to log into the admin console, it denies me. I read that I had to use the same user name and password that I used to initially log into the AMS to first time it opened up Note, that I am trying to access this browser based console from outside of AMS. The index.html page comes up fine from the outside. So which user name and password should I use? This is also a linux cent os AMS which doubles the complications.

Hi there,We have set up our AMS5 server to stream with livepkgr.   What we would like is for people who connect to the stream to start listening in sync with where the broadcast is at.  We don't need people to go at the start of the broadcast.   The broadcaster may be streaming as they set up what they want to share and then share the link with the intended audience.When watching the stream with via RTMP, its basically around 1-2 seconds behind the actual broadcast - which is excellent.   When watching with HDS, it always goes at the start of the stream.   If the broadcaster has been streaming for 5 minutes before being ready (depending on the content they need to share), the viewer will be watching from the start with the unwanted potential to see things they are not supposed to.Now we set up the event as follow:/home/ams/applications/livepkgr/events/_definst_/liveevent/Event.xml:<Event>  <EventID>liveevent</EventID>&

Português_________________________________________________________________________________________________________________________________________________________________________Boa Dia,   Baixei a versão de avaliação do Adobe media server, quando eu vou me conectar ao Adobe Media Server a partir do Adobe Media Live Encoder não me solicita senha do usuário, gostaria de saber se tenho que usar o Adobe Access junto com o Adobe Media Server ou se tem uma configuracao para isso.Desde ja muito obrigado pela atencao.Inglês_________________________________________________________________________________________________________________________________________________________________________________Good Day,     I downloaded the trial version of Adobe media server, when I go to connect to the Adobe Media Server from Adobe Media Live Encoder does not prompt me user password, I wonder if I have to use Adobe Access with Adobe Media Server or if you have a configuration for

When the server is booted, it starts off loading very little memory. As people watch streams, memory use gradually increases. And increases!  Right now, only 22 MB free.But with only 10 people currently watching streams, I still have 100+ processes open.It seems these (caches?) open but never close - like there is no garbage collection.I appreciate the value of caches, but how can I limit the memory used by AMS??I would like to reserve a little for other processes... I'm getting nervous when it approaches the SWAP-zone...(this is AMS 5 on Centos 6.3, BTW)

Many cam is a very useful software for streaming desktop, videos, photos, etc to AMS recently many cam updated a option called RTMP stream to directly stream to Media Servers the server url and stream are working fine with justin.tv freedocast etc but not working with AMS livepkgr and live service assist if any one know this

I am using the following to stream video live:- Windows Server 2008 with Flash Media Server 5.- Flash Media Live Encoder 3.2- This tutorial step by step to setup the manifests: Stream live multi-bitrate video over HTTP to Flash and iOS - YouTube- In FMLE the following settings:     - H264 Format, Main Profile, Level 3.1, Keyframe freq 4, 150, 500 and 1000 kpbs bit rates.     - FMS URL: rtmp://<my-static-ip>/livepkgr     - Stream: livestream%i?adbe-live-event=liveevent- The liveevent.f4m and liveevent.m3u8 files are saved in the webroot folder- Built in administrator console OSMF video player, with the following URL: http://<my-static-ip>/livepkgr/liveevent.f4mFMLE is saying it connects without issue and that it publishes, and the server shows that the stream is connecting in the admin console. The one thing that does not appear to work is playing the stream back itself. I've tried any number of different  URLS

Hello,I have installed FMS 4.5 with http apache. Live Streams run very well; however, when accessing the live streams from an iphone, I get this error pop up:The Requested URL was not Found on this ServerAny idea please what is the cause and how to fix?Thanks

not speak English, I need help, I use NO Media server and are charging me

Hello Friends,I installed Adobe Media Server Starter and running a success-full RTMP, HDS and HLS live and vod stream to my cross platform devices.now what i want to know ishow to send this stream to satellite, to make the stream free to airis this possible ?if so please Assist me

I was cleaning my computer because it was so slow and i couldnt use ilustrator and i accidentaly erase it. HELP. I need to do my homework

HLS plays fine on IOS device.  IOS device has 30 second delay and never buffers. Desktop only has around 10 seconds and buffers all the time. should the desktop be the same delay??

I have a vbrick 9000 series encoder transmitting an RTMP stream to Adobe Media Server 5's multicast service.  It appears that AMS5 starts the multicast but then stops the multicast.   The AMS tool Multicastplayer just says "Waiting for Video..."How do I configure the 9000 encoder and the AMS5 to allow multicast to work? Thanks in advance!vbrick 9000 transmitter configs for multicast- Transport type: RMPT- ip address: ams server IP- Destination Port: 1935-RTMP Application: multicast-RTMP Stream: livestreamTest1?fms.mulicast.type=2&fms.multicast.groupspec=G%xxxxxxx&fms.multicast.address=239.135.x.x&3A4444-RTMP Username: <blank>  <-- I don't see where there is a "username".  There is no username in the configurator tool.-RTMP Password: broadcast  <-- This matches whas I used in the multicast configurator tool.Logs from AMS5Handling pulish request for source stream: livestreamTest1,query string: fms.multicast.type=2&fms.multicast.gr

Hello,Is there any way to add a watermark or a tracking caption / subtitle to dissuade users from using screen capture to download streaming videos?Also, can you lock down access by IP?Also, is the pricing model on Adobe Media Server 5 on Amazon Web Services - Pricing up to date? The current EC2 generation is M3 -- do the same pricing guidelines apply to M3 instances?Thank you for your help, Karamjeet

I need to record through by mobile camera and play it in browser of my website. In my mobile phone the frame that should show the video is created by flash player but it is just white and no video (preview) is seem inside the frame.The video that is recorded through my mobile camera should be seen in the frame but it is not there.I used HUAWEI and sumsong mobiles and both use Android.I later made an Air for Android application and used CameraUI class. It works in desktop and shows the video captured by webcam but still it dose not work on the mobile.Thank you very much for your prompt answer

I have been able to view the sample and personal videos from local host just fine. But I can't access them from other computers. I have tried to embed the sample player in a webpage but only get black screen. I used the port test, two on one page, and both came back with all passes. The link below is the testing file I have been trying to use. It works from local host but nowhere else. Any suggestions?rtmp://192.168.1.74/vod/mp4:Sunday_June_15_2014.mp4

Hello,I am still new to FMS... I have installed FMS 4.5 several weeks ago.. but at that time, i did not install Apache HTTP Server. ...So, if now i need to enable Apache HTTP Server, can I do install it now alone? or i need to re-install FMS4.5 to get it working?thanks

I am new user of adobe media server and i would like to stream video from vlc to adobe media server and the source is from dreambox. After i get the ip of one video then i stream it from vlc to rtmp:localhost/live. But I can't recieve the video from adobe media server administration console.Can anyone help me with it?

Is RTMPS affected by following vulnerabilitys?I use AMS 5.0.3 on CentOS 6.4.CVE-2014-3508,CVE-2014-5139,CVE-2014-3509,CVE-2014-3505,CVE-2014-3506,CVE-2014-3507,CVE-2014-3510,CVE-2014-3511,CVE-2014-3512Thanks.

Hi, excuse me, are there any way that the Administration Console of Adobe Media Server shows more than just the RTMP streams? We need it to show the HLS streams too. Thanks in advance.

I'm trying to enable htcacheclean for AMS on windows. I've performed the following steps:1. Modified the ams.ini to enable htcacheclean:1.a. Set SERVER.HTCACHECLEAN_ENABLED = true1.b. Set SERVER.HTCACHEROOT = C:/Program Files/Adobe/Adobe Media Server 5/Apache2.2/cacheroot2. Updated the httpd.conf by uncommenting LoadModule cache_module modules/mod_cache.so3. Double-checked the Server.xml htcacheclean block which looks like this:<HtCacheClean enabled="${SERVER.HTCACHECLEAN_ENABLED}">  <Directory>Apache2.2/bin</Directory>  <Program>htcacheclean</Program>  <RequiredOptions>-p${SERVER.HTCACHEROOT} -d5 -l1024K</RequiredOptions>  <AdditionalOptions>-n -t -i</AdditionalOptions></HtCacheClean>The htcacheclean tool doesn't seem to run or launch. I've checked the master.00.log and don't see AMS invoking the htcacheclean daemon:2014-07-1618:04:244480(i)2571011Server starting...-2014-07-1618:04:284480(i)2581413C:\Progr

Hi, excuse me, i need to authenticate the publishers of live streams. I founded an article that talks about it, and it sound simple, but i don't know where to start. The solution is based in server side actionscript, but how to implement it? Thanks in advance."The next step to increase security would be to implement a user authentication scheme to validate the connecting client. For example, using variables passed in through the clientNetConnection method, you could implement a simple username/password, an encrypted token (MD5 Hash), or a unique key:User credentials (login/password): NetConnection.connect("rtmp://yourFMSserver.com", "username", "password");Encrypted token (MD5 Hash): NetConnection.connect("rtmp://yourFMSserver.com", 6aef79f07bc8f23c38e8979f3630f436);Unique key:NetConnection.connect("rtmp://yourFMSserver.com ", 349jh3k4324h9.234234098);Then, on the server side, FMS would be able to integrate with web services (SOAP), Flash Remoting, XML, HTTP Post (loadVars) or simple f

Hello,I have an RHEL 6.5 final release that I have Adobe Media Server Professional 5.03 installed on.  The server is a new dell R720xd, 2 x E5-2680 v2 proc., 128 GB RAM and over 4 TB HD.  We had an old version of fms 3.5 (fedora8) that was installed and working and the server has hardware failed.  Our old content seems to be working fine, however when new content is added the server will not stream f4v, flv, etc, it will olny stream mp4.  If I have/had an f4v file, I can just change the extension to mp4 and then the server streams.  Very frustrating, I have done the troubleshooting on the online help files and have now posted this to the forums.  Can anyone help or have a suggestion?  Thanks.

Hi everyone reading this...I'm not familiar at all with publishing streaming content on a web. However I got a question from a client asking to get my Live Flashstream from the mediaserver and embed it in an iFrame.The problem as I've been told is that it's not possible to do this without first create a flashplayer playing the stream and then iFrame the player. Is that correct?Are there any other suggestions?As mentioned earlier I'm not a web-publisher so please explain it to a monkey...Best regards/Frippe

I am trying to set up our Flash Media Interactive Server 3.5 to automatically record a copy of each stream that comes through it. The streams are coming through a streaming appliance (NewTek TriCaster, which uses a Flash Media Live Encoder profile), so I don't have a ton of options there for settings or doing any code. So I am left with setting this up with just server side code. I was able to get it working, but every recording cuts off after 5 minutes. I thought that perhaps it was something in the application.xml file, so I renamed it as application.xml.bak (making no xml file) and it still did it, even though all of the documentation says that it is supposed to be unlimited as the default. So then I made a blank application.xml file and entered this: <Application>      <Recording>           <MaxDuration>99999</MaxDuration>           <MaxDurationCa

Hi,I am using AMS 5.0 and want to implement P2P conferencing. Can anybody give me recommendations on the case where using a P2P video for conferencing will be most beneficial and also where P2P video conferencing is not at all recommended. I ask this question on the basis of following considerations. 1) The type of network: Is P2P video conferencing recommended for LAN only. How would it behave if the users in the conference are from different geographical areas and are connected by internet(the internet can be average, in such cases, at any users end).2) Number of users: Does number of users has anything to do with the performance of P2P video communication.Thanks,Sahil.