Questions

I have two really frustrating issues:
1- If I close/shrink the Files window, I can't open it again.  It I choose it from Window >Files will briefly flash by on the screen, then is gone. I have to totally restart DW to upload files I am working on if it gets closed or shrunk down.
2 - Files window, when open, ALWAYS covers the file/code I am working on. I can click on any php, css or html file and Files will just sit on top of it. So I have to edge Files off to a corner if I want to edit some code, then upload without restarting DW (see #1). 

I've almost totally stopped using DW since this is such a pain.


I knew there where advantages to helping out in this forum, and other on-line help for web development, and at lunch time today one arrived in my mail box that I think is worth posting about, especially now Muse is EOL.I had been sent a free, (complimentary) copy of an ebook - Learning web design by Jennifer Robbins, ( 5th edition) .I know that we all think that we do not require to brush up on the basics, but what caught my eye from the first chapter was that Dw is mentioned as a code editor, and the question of must a web designer know code, (the answer was yes) was also answered. It also goes into many of the newer html/css features such as srcset and css grids, (so is up-to-date).I'm not trying to promote the book, (just as I did/do not think I should promote Dw or extensions whilst an ACP or now) but if anyone has time it may be worth downloading a free example of the book, (first couple of chapters) from Amazon, as a quick read of some subjects showed me how much I take for grant

Is it possible to use vagrant as a testing server for Dreamweaver? I am trying, the pages load but I get an error everytime a page refreshes. The error I get is this "Dynamically-related files could not be resolved because the site definition is not correct for the server." Searching for answers, I found something (not specific to vacant as the server) that said to use something other than the LAMP or XAMMP stacks you need to edit a PHP.xml file. Does anybody know what to do? Thanks

I am consistently getting time out message for Linting in Dreamweaver CC 2018. I saw some old mentions of this in 2015 but nothing for 2018. The 2015 suggestion said to create a NodePort.json file with a port value in it. That didn't work. Also my PC is a standalone one with no port blocking.Are there any new suggestions applicable to Dreamweaver CC 2018 relating to linting timing out?

Can some help me with some questions.Q1: Can one load this on a USB?I think I have enough space but says I don't?Q2: How many GB do you need to load?Thank you

This is an odd one. At the end of a long site map file, I can type in new text, but the mouse cursor will not select that text. Just wont.But it's not a problem in other sections of that same file -- it will select ok.And it selects ok in other files. Thanks.

So I'm working on this page where I have three separate divs. In Div 1 is a list of names. Div two is supposed to contain the contact information and div 3 has an image. I have it set that when you click on one of the items in DIV 1 the image in DIV  changes thanks to the swap behavior. Now, I've done it before where I can swap content using "Set Text of Container" and that's what I'm trying to do in DIV2. So when you click on a list item in DIV 1 the image changes DIV 3 and the text changes in DIV 2 .My problem is that whenever I try to add the "Set Text..." behavior Dreamweaver crashes. I have refreshed, rebooted and so on, still it crashes. Does anyone know of a different way I can swap the text in DIV 2 onClick? It's a lot of text with different styling so I can't use something as simple as this: Tryit Editor v3.5 . Unless there's a way to use that and also style the various headers and links that need to be displayed. 

On my old html images I click on image on the html page in DW and below in properties I see the field to insert an image alt tag.But with the new mobile friendly conversions I'm doing, I click on the image and there is no alt tag anymore in properties. Confused.(and alt tags for images help with SEO, get those image into Google images correct? Thanks.

I am not new to Dreamweaver CS4 but am by no means an expert.  I support a website for my golf course Oak Harbor The text formatting that I see in the code plus design view does not display correctly or at all on the website.  I want to have a title in <h4> but it will not display at all unless I use a CSS rule <p class="CenterBold100">.  The text displays correctly if tagged h3> in the design view but does not display at all when viewed on the website.I go on to use <h4> and <h3> throughout the rest of the home page and what I see in design matches what I see on the website.On another page Oak Harbor I again force the title with the <p class="CenterBold100"> but now the text tagged <h4> and <h3> does not display at all.  If use a <p> tag the text is too small.  I am guessing this is just not understand CSS well enough but hopefully some kind expert out there will point me in the right direction.Thanks,Jim

I have tried through various means to reconnect my Server Behavior Panel with Bindings, etc.  The file, that's supposed to be deprecated, just doesn't exist on my computer.  (Deprecated_ServerBehaviorsPanel.zxp)  If I look for the "Deactivated" folder, it's not there.  Please send me the file or tell me how to make it work again like in Dreamweaver CS6.  I've spent over 3 hours of my time trying to resolve this issue!  How am I supposed to get any work done when Adobe keeps on changing tried and true stuff that I use every day!  That's just plain wrong!  So, fix it NOW!Later,

and so forth in an infinite nesting...with dw CC 2018

Hi there I just published my website (primaltheatre.com) and the homepage instead of displaying my index.html file it's displaying a blank page with the message "Welcome to your new website", and only when I enter primaltheatre.com/index.html does it show the page I intended as the homepage. Does anybody have any idea how to make my index.html page as the homepage?

Ok, I haven't been using dreamweaver on a regualar basis for a while but I am working on a new site and I am having an issue where I edit an image and save over the old one. When I select the file and tell dreamweaver to put the file on the remote site it says that it didn't transfer no change. I would like it to put the file whether it thinks its changed or not. I had to catch this before the window closed I wish I could keep that transfer window open. Is there a setting I can change for this?Thanks!

How do I automate steps in DW CC 2018.2?I saw instructions to use the History Panel to automate but I don't see a History Panel in this versionthanks

Hi there!I have  a question on Dreamweaver CC 2014. I need to know how to make a image slideshow in that. I watched a video and I follow the steps but its not there rightly. In Insert tab - Media tab - and then i need flash viewer tab. Its not there. Can you help me please.I will look for a quick reply!

I'm using Dreamweaver CC 18.0Trying to do a simple Find & Replace like I've done for many, many years using "in Open Documents." For some reason, Dreamweaver wants to go into every single CSS and Javascript file referenced in the open HTML files. I don't care why somebody thought this was a good way for it to work from now on -- I just want to know how to stop it. There is a little Show All File Types menu in the upper right and I can choose to not show either JS or CSS but I can't choose not to show both. I don't know if that's related ... it doesn't matter if I can't deselect both, I suppose.

Adobe Muse Product Announcement

Is there an app for iOS or Android that allows us to inspect code just as we would do on a desktop browser?I'm finding loads of desktop browser simulators, but nothing that specifically runs on a handheld device.

Show invisible Tab characters but not end of line characters in Dreamweaver or maybe if it is possible to edit them, change colour etc.I try edit settings in main.less but I cannot find settings/class for tab, and end of line?

Muse is going away so have to move my web site. I exported all my pages from a working site to html from Muse. I got a folder full for stuff with all link materials , images etc. When I opened the index page in Dreamweaver, everything looks okay. The images, fonts everything looks as original except none of the top level or any of the other links work. When I try to see the site in Live View, I get this message. Are the links still there? Am new to Dreamweaver.You tried to access an external HTML page, which can not be opened on the device for preview. Open the page in Dreamweaver to preview the page on the device.

Does anyone knows how to remove empty lines after a bracket using Apply Source Formatting. There are so many options in the Settings, it must be amongst them, but I can't find it.Thanks

Is there a way to import my content, (text, images, videos and links) that will all be styled the same way on every page, into new pages that I create from a single .dwt?For example say I have a site about animals and I have all of the above content about different animals it is similar in format but the words and pictures are different and they link to different things. I have lots of text and several different pictures with captions that would take a long time to manually enter page by page. Does DW have an import function that would help me do this? Using DW CC in Windows 10Thank you,Amy

Is there some kind of app software to manage json files like phpMyAdmin manages mysql data?I mean how do you arrive at a finished formatted json file without doing it manually........surely there must be some user friendly app UI which inserts, updates and deletes info from a json file or exports as a json file right?CheersOs

For each the sites that I have developed for my clients, I received the following message from Google.

Dreamweaver CS6. My Enter key used to work to "Find Next" in Find and Replace and suddenly it has stopped (I now have to click the Find Next button to go to the next instance of my search string). I didn't change any settings. What's up?