Skip to main content
Rikk Flohr-Retired
Adobe Employee
Jul 10, 2025 8:27 PM UTC
Question

Distraction Removal: Dust (Camera Raw and Lightroom Classic)

This post applies to Camera Raw and Lightroom Classic.

 

Dust Removal is no longer in Early Access status and can be found in the Remove edit panel for Camera Raw & Lightroom Classic. Dust Removal helps remove distracting spots in an image that may be caused by dust on a camera's sensor and is also effective on dust on the rear lens element.

 

Once enabled, your image will be scanned, and any detected dust spots will be automatically removed using Content-Aware Remove. For refinement, you can select one or multiple spots to delete or refresh. Batch removal is also supported; simply select the "Dust" checkbox under "Remove" in the copy settings dialog.

Please note that scanned negatives are not in the scope of this feature at this time. 

 

  • Dust spots on scans tend to be located in the focal plane, with the negative and very sharp, while sensor dust is typically positioned out of the focal plane and therefore not in focus.
  • Scanned negative dust typically appears as white spots on a darker background, whereas perceived sensor dust tends to appear as dark spots in lighter areas. 

 

We would love to hear your feedback on Dust Removal! Please give it a try and let us know what you think:
 

  • How is it useful?
  • How could it be more useful?
  • What could we do to improve your experience?

 

Lisa Ngo, Product Manager


Also see this video by @brianmatiash where he demos the feature: https://www.youtube.com/watch?v=YwpUX4b6igY 

 

Posted by:

437 replies

michael_5661
Participant
Apr 29, 2026 10:15 PM UTC

Trying to remove dust from film negative scans and it can’t find the dust. I think maybe because the inverted negative makes all of the dust white?

Translate
Rikk Flohr-Retired
Adobe Employee
Apr 29, 2026 10:17 PM UTC

Please read the primary post on this thread. It explains the scope of the feature and addresses your question directly. 

Translate
Rikk Flohr: Adobe Photography Org
Known Participant
Apr 29, 2026 10:34 PM UTC

​@Rikk Flohr_Photography   Adobe - please change the name of this tool or you will continue to get hundreds more of these  user complaints! 

In a previous reply I suggested ‘In-camera dust’, or perhaps Adobe can come up with a better name?

Translate
Bob Palmieri
Participant
Apr 20, 2026 9:46 PM UTC

Definitely one of the most disappointing tools in any of your products. Didn't find any dust in hi-rez scanned B&W neg.

Translate
Rikk Flohr-Retired
Adobe Employee
Apr 20, 2026 9:48 PM UTC

This product is not designed to remove scanned dust. Please read the top-level post for this thread for more information. 

Translate
Rikk Flohr: Adobe Photography Org
Bob Palmieri
Participant
Apr 20, 2026 10:04 PM UTC

Thanks Rikk. Amusingly, I read the two bullet points regarding dust on scanned, yet seem to have missed the line above stating what you pointed out. 
 

Somewhat amusing to me is the fact that someone went to the extent of defining the characteristics of spots on scans so well, yet there’s no implementation of an algorithm to remove them.

Translate
LDB2002
Participant
Apr 19, 2026 2:40 PM UTC

This tool is degraded.  It can’t find dust it says - it can distinguish between squinting eyes and a scratch or reflecctions in an eye and dust.  I thought it was pretty good when I first used it but it is not doing a very good job now.

Translate
SuperFabe
Known Participant
Apr 17, 2026 6:14 PM UTC

Clicked the “Provide Feedback” and it brought me here, so here is the feedback.

For every spot I select, LrC processes the selection. I have a dusty old slide (even blew and brushed off prior to converting) and removing spots becomes a click and wait approach. Why can’t we have an option to batch select, then LrC processes. While it processes I can do something else which is a better use of time.

Translate
ethel merman iii
Participant
Apr 15, 2026 2:17 AM UTC

It only removed maybe 5% of the dust. There should be an option to somehow make it find more dust.

Translate
Inspiring
Apr 11, 2026 10:08 PM UTC

Dust removal found no dust on an old scanned photograph

Translate
MoonMinnow
Participant
Apr 7, 2026 5:41 PM UTC

Dust removal helps me manually identify dust using the “visualize spots” filter, but when I click “Apply,” nothing happens. Is it supposed to automatically remove the spots? Does not remove my very obvious, very white spots on very dark subject.

Translate
MoonMinnow
Participant
Apr 9, 2026 10:54 PM UTC

Replying to my own post… I reread the purpose of this tool and understand this is to remove dust spots in a photograph caused by dust on the camera sensor. I was expecting it to remove representational dust in the image. For example, I photograph fabrics and there is often dust on the fabric. I was looking for a way to automatically touch up the photo to remove the photographed dust. The tool actually does do a good job removing camera sensor dust spots. And this is a huge time savor for me because I photograph in a studio on a white backdrop which shows all my camera sensor dust. So I am suddenly a fan of this tool. Perhaps the tool should be renamed to be more specific, such as “sensor dust spot removal.”

Translate
Known Participant
Apr 11, 2026 12:36 AM UTC

Attention: Adobe employees!   OP - Rikk Flohr_Photography

​@MoonMinnow I agree with you completely about renaming the tool!  It is causing too much confusion by just calling it a ‘Distraction removal>Dust’ tool.  Users, quite obviously, assume that it should remove all dust spots from their photos, more than just sensor dust, as indicated by over 200 replies to the original post.

This is comment I made on this post about a month ago:

“My take on this feature, and I could be wrong, is that it is only designed (to quote the original post) to remove "distracting spots on an image that may be caused by dust on a camera's sensor", and also to quote "please note that scanned negatives are not in the scope of this feature at this time".

I guess the term 'dust removal' unfortunately implies far more than just sensor dust!

What users (including me) are clamouring for is a tool that will remove dust spots from scanned photos, negatives and slides.  Will this ever be introduced?”

Translate
Known Participant
Apr 7, 2026 1:40 PM UTC
  • Tried a few tins on different images with dust, but so far, not useful at all. (None of the images were scanned negs).
  • It could it be more useful if it actually recognised any dust at all! Doesn't seem able to recognise even the most obvious dust spots.
  • Resolving the above would improve the experience. It would also be useful if user could indicate to app what’s dust (vs detail), or scratch (vs line to be retained), because all tests so far indicates it can't tell the difference even when it should be obvious from the context.
Translate
Marcolinoquellovero
Participant
Apr 5, 2026 8:22 PM UTC

Non funziona per nulla con pellicole scansionate, la polvere e i pelucchi rimangono dove sono :-(

Translate
raymondc52885003
Participant
Apr 2, 2026 4:33 AM UTC

Did nothing for scanned slides

Translate