Questions

I have been using FMS 4.5 for live video streaming application. when im using the application in my local network everything is working fine. But I use the same application in an external network the connection to the fms server is failed. The problem is that fms server is not configured for external ip. can anyone tell that how to configure my fms server for external/public ip?(say my external ip is 220.225.210.90)Thanks in advance

Hello everyone,In the manual (source: http://www.adobe.com/content/dam/Adobe/en/products/ams/pdfs/ams5-intro-wp.pdf), I can see that the starter edition has a limit on the Live adaptive bitrate streaming (RTMP) : "Limited to 10 simultaneous connections"However, a bit further on, the Starter license seems to be limited to "50 simultaneous RTMP connections".What is the difference between those two? Is this a typing mistake?Wim

I was wondering how often does FMS update the included Apache that comes with the install?  Is the Apache patched along with every FMS patch? Or, is it possible to pull out the included Apache and use our own Apache instance?  If so, what would be needed to be moved over to our own Apache install from the included Apache (modules, configs, etc)....

Is there any way to see how many clients are vieweing RTMFP IP Multicast stream in FMS Admin console ? I see a connect happening in logs tab for Fusion multicast but in IP Multicast it doesnt . May be cause IP Multicast doesnt make a server connection ?

Im using fms 4.5 server for streaming live video to ipad using HTTP Live Streaming. There seems to be delay of almost 10 seconds in video streaming to ipad. I changed the segmentduration in event.xml to 8000, but there is no change in the delay. Is it possible to minimize the delay to 2 or 3 seconds?Thanks in advance

Im using fms 4.5(windows machine) for a live video streaming application. The application is done in flex 3 and it is about capturing a camera input in the presenter side (windows machine ) and the live video will be streamed to the viewer using the fms. There is no problem if the viewer is using windows machine. But if the viewer is using ipad the video is not dispalying as it wont support flash player. Is there any way to stream a live video from fms 4.5(windows machine) to ipad device?Thanks in advance,Aras

The Adobe Media Server 5.0.1 docs say that Logging.xml controls rotating of the Apache access_log file but its not rotating and I don't see how to configure it in Logging.xml.Logging.xml takes care of the AMS log files like Access.log but it doens't seem to handle the Apache logs. I've seen where you use logrotated to rotate the Apache logs, then issue a "reload" to the service, but AMS controls Apache and the AMS service only supports start, stop, and reload which takes a minimum of 5 to 10 seconds to reload the server. How can I rotate the Apache logs using Logger.xml or how can I issue a reload directly to Apache when the AMS scripts control it?http://help.adobe.com/en_US/adobemediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f29260bd-7ffa.2.3.html

How do I enable SWF verification on Location level in the Apache2.2/conf/httpd.conf ?I have tried this but it does not block the player even if I dont have any whitelist file in the whitelist folder:<Location /phds-hds-vod>    HttpStreamingJITPEnabled true    HttpStreamingContentPath "../webroot/vod/phds"    JitFmsDirPath ".."    Options -Indexes FollowSymLinks    EncryptionScope server    ProtectionScheme phds    #######################        PHDSCommonKeyFile /opt/adobe/fms/phds/common-key.bin    PHDSSWFVerification true    PHDSSWFWhiteListFolder /opt/adobe/fms/whitelist/</Location>

Hii have read a lot of documents, configuration guides and other forum posts and i know there are a lot of other posts regarding this issue. But i try this to get it work since 2 Days Now I'm  a little bit frustrated.I dont understand why HTTP streaming not works. It is possible to play the sample file over HTTP and it is possible to use the default livepkr for live streaming. Now I have 404 errors. The RTMP Stream Works and i have segmented Files in the server directorythis is my folder structureThe record  stream file:/applications/custom01/events/live/project/live_500/Mzk4MDk2MzQzNQ=.stream<stream xmlns="http://ns.adobe.com/liveevent/1.0">        <type>                f4f        </type>        <name>            &n

Hi everyone, I have recently bought Adobe Media Server 5.0 STandard and i am looking to install into one of my windows server. I need to stream short mp4 videos online so that users can able to stream the recorder videos via browser and also via mobile web.I am very new in this area and have no prior experience. I am wondering if anyone here can give me a step by step guide or point me to any site that can guide me through. Please kindly help. Thanks.

Hi All,Is there any book for AMS 5.0?Thanks in advance

Hi guys,Could anyone explain how can I record the live stream and than play it as a vod at later time?Is it possible to achive it?Can you give any tips guys?

Assalamualaikum and Good Morning,just a basic question. Flash had been not supported in Android 4.0 and above. So how do i can view any livestream RTMP using Android 4.0 and above devices??thanks.

Hi,I'm a newby to FMS and I have several questions ;-).I'm planning an livestream. To get as much viewer as possible my plan ist to stream with 3 different bitrates. This works great ;-). But within my tests a few problems/ideas came up...1. FMS is not recording the stream. I used Auto-DVR as well as manual start stop. I also prefixed mp4: ... any ideas? Is it perhaps because it is not the "interactive" one?2. Is there a _simple_ possibility to to enable something like "autoquality" (between the 3 streams) on the client side? So that the best solution for the local connection is chosen?3. Is there a simple possibility to get viewerstats? Thanks a lot for your help

Hello Everyone,I have a question, can I install Adobe Media Server 5.0.1 (Trial Version) on Ubuntu 12.04 LTS Server 64bit ?

hello so i tryed the famous webcam recorder exemple and it works fine,but the client was writen in flash AS3 so what i am asking is:can we create a client with J2ee or jquery ... or anything from java family?? thanks in advance

Hello!I not found any tutorial or information about procedure to convert a server side application to ASE (Encripted) file.How to do it?I have a main.asc (human read) and I wanna convert to main.ase (impossible to be readed by humans).Thanks,Rafael

Hi,      I have set up Edge and Orign sever for live audio-video transmission. Connection set up successfully between the servers but isuue was number of clients displayed in Origin server console. Suppose:FMS1 is origin server,FMS2 is Edge server.A1 is user connected to orign server(FMS1) and A2 is user connected to Edge server(FMS2).A1 publish video stream to origin server and a2 receive stream from Edege server.Now Edge server console  show that 1 user is connected to Edge server and Origin server show 3 users connected to Origin server. But in the session there are only total 2 users. My edge server settings in VHost.xml . <Proxy>                <Mode>remote</Mode>                              <RequestTimeout>2</RequestTimeo

I have created my own multicast configurator and player . Now based on documentation here http://help.adobe.com/en_US/flashmediaserver/devguide/WS7812b00092aae0dc-2829dcd012a54a3ed1a-8000.html#WS7812b00092aae0dc-24f6ecf312a54a597b9-7fff I still couldnt find how can I use "Interface address" parameter in action script . Can any one please point me to right class/direction to add that in player and configurator ?

I have created a multicast video player using actionscript 3 to which I pass parameters and based on it I change different things in player . Here is my code .                              var groupspec:GroupSpecifier = new GroupSpecifier(group);                              groupspec.setPublishPassword(streampassword);                              groupspec.multicastEnabled = true;                              if(is

Hi there,Instead of 'pushing' a stream into AMS, can the server simply 'listen' to an existing stream and then ingest it? From there, it should simply relay back out as RTMP. Can this be done? If so, what stream formats can it 'listen' to? For example, I have a Shoutcast stream which I would like AMS to listen to and then redistribute back out as RTMP. Similarily I have another RTMP stream already being published...so can AMS listen to this as well? Thanks!

I have created a simple multicast player using actinscript 3 which works fine and plays multicast stream well . Although when stream should fail . Or even if I stop Flash Media server it returns success  codes : "NetConnection.Connect.Success" ,"NetStream.Connect.Success" and "NetStream.Play.Start" . I cant detect  it when multicast stream fails in flash player. I need to switch to unicast stream if multicast fails and I cant detect a failure because of wrong status.  Why I am getting wrong status ?

I have recently upgraded to FMS 4.5 from FMS 3.5.  I have a lot of old apps that utilized the FlvPlayback component 2.1, these apps have stopped streaming video.  All the apps that use the FlvPlayback Component 2.5 or OSMF or  other players like JWplayer work fine with the FMS 4.5.  Does FMS 4.5 not work with the old FlvPlayback component 2.1?

Using Flash and RTMP it's easy to go to a specific time in a VOD stream served from AMS using the seek method.Is there similar ability to seek to a specific time in VOD delivered to Safari on iOS?  The native video player provides a currentTime method, but I've not seen documentation anywhere to suggest currentTime or another method to provide rapid and accurate time based access from AMS.FWIW, Wowza documentation provides an answer:http://www.wowza.com/forums/content.php?326-How-to-specify-a-play-start-time-and-duration-for-HTTP-streamingTIA,RT

Hi,I have setup an Origin and Edge server to offload live and VOD content.  However, my end-users are pointing explicitly at the Edge server.  Is there any way to configure the setup so the Edge server (proxy) is transparent and the end-users only know about the Origin server?  I am trying to configure video split streaming with FMS.