Participating Frequently

Question

My new powerful rig IS NOT exporting much faster than my old one !!

Forum|Forum|5 years ago
February 16, 2021
7 replies
1222 views

Hi all. I've recently upgraded my Windows 10 rig from:
- Intel i5-3470 (4 cores / 4 threads)
- 16GB DDR3 1600 MHz
- Nvidia GTX 960 4GB
- 2 SSD drives
to:
- Ryzen 7 - 3700X (8 cores / 16 threads)
- 32GB DDR4 3200 MHz
- Nvidia GTX 960 4GB
- SSD + NVME drives
(kept my GPU until prices drop a little!!)

The thing is that I don't see much difference when exporting from PPRO (latest version)… perhaps just 20-30% faster export times than my previous rig (on the exact same projects, taking notes by using my stopwatch), which is NOT great considering that the new CPU is (according to well-known benchmark ratings) 7-8 times faster than the old one! (and 10 years newer, i5 was a 2010 cpu and the 3700X is a 2020 cpu). Plus my new RAM is whice as fast and twich as large).

I know that the 960 GPU doesn't hep much but STILL… I was expecting a much better performance based on the new CPU+RAM !! (plus NVME). When I was exporting with the i5 all its 4 cores were utilized at 100% (GPU was around 10-15%) and now Ryzen's 16 threads are only utilized at 30% and the same GPU at 99% (!!!)

So what's really happening? Isn't PPRO "smart enough" to utilize my brand new CPU+RAM to their full potential ?!! Thank you in advance.

This topic has been closed for replies.

V

vigilant_spb

Known Participant

Как же за...ал этот Премьер со своими глюками, невозможно даже проиграть на таймлайне некоторые видео, если они в hevc... При том, что 3700x/64gb/RTX Quadro 4000/M.2 SSD, один хрен я не могу без лагов проиграть СРАНЫЙ МАТЬ ВАШУ ФАЙЛ С IP КАМЕРЫ, который прекрасно воспроизводится в VLC. И за это говно ещё деньги каждый месяц списываются, единственное, что чётко работает. Бесит, мля

1

1.21 gigawatts

Inspiring

You're luck your getting 99% GPU.

Im only getting about 25% CPU with my Ryzen 2700x & 5% on my GTX1080 ti

Adobe software is NOT utilizating new hardware very well it seems.

B

basil1891

Inspiring

It depends - if there is no GPU-heavy effects, it's what you get. But sure, it can be a bug of some sort.

A

Andy 1968

Inspiring

If you are rendering with Nvenc then you will not see much difference. The GTX 960 is way under powered when compared to the CPU. You need a balanced system (CPU and GPU). The video below will show how Premiere Pro can use Nvenc and Quick Sync and what to expect.

R

RjL190365

Legend

Here's why:

That GTX 960 was a weakling of a GPU even when it was new, back in early 2015. As such, it was already barely well suited to that 3rd-Gen Intel i5 CPU. Now, you carried over that same GPU to a newer system, and that's when that GTX 960 starts bottlenecking your new CPU.

B

basil1891

Inspiring

Nope, the difference less than 30% implies that something is wrong there

C

chrisj44835960Author

Participating Frequently

I've also started thinking (apart from the GTX "bottleneck") that could be the fact that I did NOT re-install windows when I performed the "switch" (as I descibe it above in my new post). In fact I used the exact same ssd boot disc and powered on the new rig (as simply as that!) and Windows 10 Pro took care of everything else!! (by auto-installing new drivers, etc), I didn't touch A THING! (same OS, same apps, same settings, exact same disk!!... from Intel to Ryzen!!). Perhaps I should sit down and allocate time next weekend and perform a CLEAN setup of Windows 10 (backup my personal files to external drive, format the ssd, install Windows, install all apps, select their settings, etc). I know this will take me a few good hours (that's why I've avoided it till now) but could give some better results!!

B

basil1891

Inspiring

I was expecting a much better performance based on the new CPU+RAM !! (plus NVME). When I was exporting with the i5 all its 4 cores were utilized at 100% (GPU was around 10-15%) and now Ryzen's 16 threads are only utilized at 30% and the same GPU at 99% (!!!)

Do you test exactly the same project, or just kind of 'similar' ?

C

chrisj44835960Author

Participating Frequently

Very good question! Actually I exported a bunch or projects and noted down their exact export times using my stopwatch BEFORE switching the components from my pc case. Now I use the same pc case with the new components (cannot go back as I've donated the old stuff) and just exporting the very same projects keeping methodical notes/logs with my stopwatch, etc.

B

basil1891

Inspiring

and the same GPU at 99% (!!!) - Check in task manager, which part of GPU is actually 99% loaded: decoding, encoding, 3D, copy? That should point you in the correct direction

John T Smith

Community Expert

Old built July 2014 was
Intel i7-4930k CPU in Asus Sabertooth X79 MB with Corsair 2x16Gig Ram
Samsung 256Gig SSD Boot Crucial M550 256G temp + 512G input files + 128G output
MSI 2Gig GTX760 video card and Samsung DVD Burner
New built January 2021 is
Intel i9-10900k CPU in ASUS-Prime-Z490-P motherboard with 64Gig TEAMGROUP-3200MHz ram
Seagate-FireCuda 500Gig M.2 for Windows and programs and usual Documents files
500Gig SSD for temporary and output files, 1T SSD for video and picture input files
Video card MSI GeForce GTX 1650 128 Bit Graphics 4Gig GDDR6 ram + Liteon DVD drive

New computer is about 4 times as fast as old computer

John T Smith

Community Expert

I only build with Intel, but there may be something in this collection of links that will help

https://community.adobe.com/t5/video-hardware/premiere-pro-hardware-articles-to-read-before-you-buy-or-build/m-p/11557686

Sign up

To post, reply, or follow discussions, please sign in with your Adobe ID.

Sign in to Adobe Community

To post, reply, or follow discussions, please sign in with your Adobe ID.

Scanning file for viruses.

This file cannot be downloaded