Skip to main content
B
B.Schoemel
Known Participant
May 17, 2017
Question

WARP STABILIZER & EXPORT FAILURE

  • May 17, 2017
  • 8 replies
  • 23613 views

Since a few weeks now I keep having issues with exporting my timeline from different projects on different PC's!!!

"Fehler beim Export Fehler beim Kompilieren des Films.Fehler beim Rendern

Schreiben mit Exporter: H.264

Schreiben in Datei: fildame.mp4

Dateityp wird geschrieben: H264

Um Timecode: 00:01:04:11

Rendering bei Offset: 63,760 Sekunden

Komponente: H.264 vom Typ Exporter

Selektor: 9

Fehlercode: -1609629695"

This is happening all the time now and I ONLY have warip stbailizer and a simple lumetri color correction on the HD 25p files from gh4 and canon 5D 4.

This is soooo annoying!!!! And yes, I have enought storage and space! Also tried different harddrives, filenames, computers... nothing works once this bug is there!!!!

PLEASE SOLVE THIS ISSUE!!!!

If I delete ALL the audio and resave the file, same same!!!

    8 replies

    P
    Petr Mk
    Known Participant
    September 4, 2025

    I can't believe this is still an issue. I still can't export a 30-second sequence just because I added a simple zoom effect. I've been searching for a solution for over an hour now, and nothing helps. Premiere is such incredibly sh*tty software. Every f*ckup like this reminds me of the importance of moving far away from Adobe

    upslon
    upslon
    Participating Frequently
    December 13, 2023

    Here i'm having a similar problem. I'know that its probabely becouse i have mixed footages (1080p@120, 1080@30, 4K@30) on a sequence of 1080@30. But when i changed the progect engine from GPU to CPU when i'm about to render, i could deliver an prores422LT.

      D
      Dyani26355798kcc9
      Participant
      October 17, 2024

      Hey there.

       

      October/2024 and even though I try my best to stay far away from Premiere pro, my editor uses it. This is still a problem.
      The only way I got around it was removing all warp stabilizers and exporting it, then using Davinci Resolve's automatic clip selection tool and stalibizing it there. Absolutely no issues with Davinci.

       

      Get your sh*t together adobe, this is way to expensive to be worse than a free program.

        Blazekiss
        Blazekiss
        Participant
        September 11, 2023

        2023 and is still a probleam............. @adobe this is a joke. A simple warp effect on a 3 seconds file cause an export probleam doesnt matter mac stuido...or pimped up mcbook or an other high end pc i am working on still a probleam.

        SOLUTION that only works for me is to edit the one small piece of video with the warp stabilizer export each of teh sequence that needs than re import in premier than exchange the mp4 file to the raw video than i can export the 30 second video file with the needed stabilized footages. 

         

        It is stil a joke that we have such a trouble after soo long and seeing how old this tread is...

        V
        Viodi
        Participating Frequently
        September 26, 2023

        The issue seems to be with the transition. What seems to work is to eliminate the transition and put the clips on two different tracks, overlap the clips, and apply the transition to each clip. 

         

        It is unclear whether the clip needs to be pre-rendered as suggested earlier. 

        K 11 films
        K 11 films
        Participant
        July 24, 2023

        Hi If you are still facing the issue.
        THE SOLUTION I got for this is make your sure your footage fps and timeline fps matches if you are using warp with 24fps footage on 30,50 or 60 fps timeline this error will occur again.

        Convert your timeline to the same as the max shots and then shift it to hardware encoding.
        this helped me and saved hours.

          R
          ronenc55097022
          Participant
          September 8, 2023

          thank you very  much! this sloved the prob with  the best original solution!
          this is very strange adobe did fix this prob from such a long time.
          thank you again. saved me lots of time

            J
            johannese53661908
            Participant
            June 16, 2023

            I was able to fix the problem with the help of the Adobe support. Here is how I do it on my MacBook Pro:

             

            1.  Mark your movie with an in point and an out point
            2.  Klick "Sequence" in the menu on the top of the screen and then choose the option "Render In to Out"
            3.  Let it render until the error appears
            4. Now you see on the green line in the timeline where it stopped rendering. Where the green line ends, it stopped rendering
            5. Make a right click on the clip where the green line stopped and choose the option "Render and replace..."
            6. Then a window appears, klick ok
            7. Now wait at let it render the replacement
            8. After it rendered klick on the same clip than before and choose the option "Restore Unrendered"
            9. Navigation with the finder to the place where your original footage is. Near the original clip should be a .mxf and a .xmp file. The name if these files start with the name of the original clip. Delete this .mxf and a .xmp files, so you don’t get a mess or your hard drive.
            10. Now try to export the part of your movie with that clip you just rendered and replaced. Best is, when you only render the part of the movie with this clip. In my case it works now and the error -1609629695 does not appear again in this particular part of the movie. 
            11. After this go back to part two and follow part 2 to 10 until there is no crashing clip anymore. 
              G
              GaryTajudin
              Participant
              May 23, 2023

              I just came to the same issue yesterday and spent all night trying to fix it because I'd have to start the video all over again. I tried everything and even tried to transfer everything over and render it on another computer to have the same message pop up. Extremely frustrating. I've tried to even uninstall and reinstall the software and same thing comes up. 

               

              MY SOLUTION: On the clip with the stabilizer effect and anything else. I need you to delete the effect and nest the clip first and then add the warp stabilizer in afterwards! And try rendering it out and tell me if it works! It worked for me. It's a bug. 

              Extremly frustrating that a paid software is having issues like this I've been having issues for years with adobe premiere. By this point I personally feel like that free app called CapCut is a better replacement for the time being with all these bugs! LOL just sad. 
              Adobe, respectfully PLEASE fix your software for the love of god this is just straight up sad that bugs constantly happens even on the most powerful work stations. 

                N
                Neyens5ED6
                Participant
                January 16, 2023

                Meanwhile it's 2022 and the problem still hasn't been solved, I can't render or export my project because of this exact same problem and none of the mentioned steps are working...

                  O
                  Oliver5FD8
                  Participating Frequently
                  January 31, 2023

                  Agreed still no resolution here. Trimming and cutting to get around this isnt acceptable Adobe.

                  Vidya Sagar
                  Adobe Employee
                  Vidya Sagar
                  Adobe Employee
                  May 17, 2017

                  Hi tobiasj,

                  Sorry for the Export issue.

                  Since a few weeks now I keep having issues with exporting my timeline from different projects on different PC's!!!

                  1. Is this happening with one sequence in different projects or with all sequences with Warp Stabilizer applied on it?

                  2. Have you tried to change the Renderer in Project Settings? File > Project Settings > General > Renderer to Mercury Playback Engine Software only mode & Export?

                  3. Have you tried to export one file with Warp Stabilizer applied from a new project?

                  Please provide us more information related to the issue.

                  Thanks,

                  Vidya Sagar

                  B
                  B.SchoemelAuthor
                  Known Participant
                  May 17, 2017

                  hi,

                  thanks for the fast response.

                  1. this is happening with different projects, differenc sequences, differen computers. So in general this is happening. Some footage hast Warp Stabilizer & Lumetri, some only Lumetri. Transitions like "Film Transition" seems to be a big issue too, but when i delete them the problem just moves to another place in the project.

                  2. I haven't tried Software only, as rendering takes forever and that is not the solution for me. As I am working on different PC's with different graphic cards, this can't be graphoc card related too.

                  3. exporting with Wrap Stabilizer works fine on single clips....

                  the strange thing is, I am editing and exporting and all works, and from one minute to the other it then doesn't work anymore.

                  I try everything... renaming, different drives, different PC's but once the bug is there, I have to re-apply all the effects! So now I am saving a edit with NO effects as a safety... but still... imaginge re-adding all the stabilizers and lumetris to a 30min edit with tons of corrections!!! this is inacceptable.

                  PS: Premiere CC2017 11.0.2 (47), BUT I had the same issue with the new update too. I just re-downgraded because of GH5 files not playing back... but THIS is a whole other topic.

                  Terms & ConditionsAccessibility statement
                  Using the community Terms of use Privacy Cookie preferences Do not sell or share my personal information ad choicesAdChoices