P: New AI-powered Generative Remove (Early Access) available across all surfaces.

[Rikk Flohr: Photography]

This post applies to Lightroom Classic and the Lightroom Ecosystem products.
Post Camera Raw feedback here

The Lightroom team is sharing an early look at Generative Remove, which makes it easier to remove unwanted objects and distractions, even on complex backgrounds, with a simple brush stroke. Generative Remove is powered by Firefly AI.

How to use Generative Remove on a desktop:

• You can find Generative Remove under the newly renamed Remove panel (aka “Heal”).
• Make sure the “generative AI” checkbox is enabled before you start brushing (note: when unchecked, Lightroom will use Content-Aware Remove to fill your brushed spots). 
• By default, you will be given a moment to refine your selection with an add or subtract brush. Remember to include shadows for a more accurate result! You can also skip this step by holding down ‘CTRL’ on windows or ‘CMD’ on mac as you finish your brush stroke. 
• Once you’re ready to apply and have accepted the terms, Generative Remove will use Firefly AI to remove your distractions and intelligently fill in the space that’s left by the removed objects. 
• Note: stable internet connection is required to use this feature.
• Generative Remove also lets you choose from multiple variations, so you can pick the one you like best, giving you full creative control. 
  
  Checkout the FAQ and Best Practices

Please give it a try and share feedback and/or report variations in this community forum. It would greatly help to include details like which app you are using (i.e., Lightroom Classic or Camera Raw) and other system details. Our team will continually monitor this thread to track issues to improve the future experience.

Lisa Ngo: Lightroom Product Manager
Posted by: Rikk Flohr 

Update:

Here are some tips if you are having issues with the feature replacing your object instead of removing it. 

• Enlarge your selection - if your brush stroke is too tight, you will have unexpected results.
• Remember that removing an object means painting over it, its shadow, its reflection, and any non-contiguous pieces. If you leave behind a shadow, a reflection, or a disconnected piece (e.g., a hand on a shoulder), the AI will attempt to create something to cast the shadow, reflect, or complete the unbrushed discontinuous item. You can avoid these issue by following the guidance provided in this linked tutorial. https://www.lightroomqueen.com/generative-remove-replace

The recommended order for applying edits is:

1. Denoise 
2. Heal (includes Generative AI Remove)
3. Crop (includes traditional Cropping, Lens Correction, Transform, or any operation changing the geometry of the image)
4. Edit
5. AI Selective edits
   
   If you deviate from that, you may see the removed object remain as a ghost image. If this occurs, you will have to use Update AI Settings, which can be found under the Develop module 'Settings' menu.

[Charlène37827008vje7]

Deja accro a cette fonctionnalité !!!! 

[MindyVee]

The generative AI is used to remove objects, not replace. Can you please ALWAYS include an option to remove an item and not replace it with something similar. 
For example, I want to REMOVE the handicap sign and gun sign from the door. WHen I select the handicap sign, AI just replaces it with a similar yellow sign. 

Thanks! Otherwise, it's pretty cool. 

[Ian Lyons]

@MindyVee 

If the AI model is relacing instead of removing, then it's very likely that you've not fully selected/masked the item to be removed. Shadows, reflections and projections not included in your selection/mask will also causethe AI model to replace.

You can see how to avoid this in the below linked tutorial.

https://www.lightroomqueen.com/generative-remove-replace/

[johnrellis]

[This post contains formatting and embedded images that don't appear in email. View the post in your Web browser.]

Using the JPEG you uploaded, I selected the yellow handicap sign with Object Aware and then added a bit that Object Aware missed, and Remove did a great job of replacing it with the wood door. Ditto for the blue no-smoking sign (below).

I see from the metadata that the JPEG was exported from an original raw Nikon D850 that you cropped inside LR. You should Remove first then Crop.  Remove looks at all the pixels in the original photo, and if you apply Remove after cropping, it's likely you won't select all of the pixels of an object on the edge of the original image. In that case, Remove will generate a replacement trying to match those out-of-crop, unselected pixels, so if there's a bit of the sign left, it will generate another sign as the matching replacement. ("Remove" necessarily must generate a "replacement", though we call replacing something with "background" a "remove".)

The same principle applies to Lens Corrections and Transform, which also crop pixels. But the metadata shows you hadn't applied either.

If this doesn't help, attach the original raw to your reply here, and we'll take a look.

See this article for more detailed instructions on how to use Remove:

https://www.lightroomqueen.com/generative-remove-replace/

[Juan Manuel29983286ltji]

Me parece muy interesante, pero entiendo que aún no sé manejarlo bien. Que alguien me corrija, pero intento borrar un zapato de la escena y lo que hace es generar tres zapatos alternativos. ¿Cómo tendría que hacer para borrar y que genere el fondo de la imagen?

[Ian Lyons]

@Juan Manuel29983286ltji 

If the AI model is relacing instead of removing, then it's very likely that you've not fully selected/masked the item to be removed. Shadows, reflections and projections not included in your selection/mask will also causethe AI model to replace.

You can see how to avoid this in the below linked tutorial.

https://www.lightroomqueen.com/generative-remove-replace/

[Thalesfigueiredo]

Uma das melhores ferramentas, esta incrivel, pois nao preciso mais sair do Lr para remover alguns objetos da cena

[nick1804]

Despite my best efforts, I cannot get the remove tool to work.  I tick all the boxes re graphics card, stable internet, having the Generative AI box ticked, updates installed etc etc.  But when I select and brush over something I want to remove, the system goes into action - but having finished, all I get is the area I selected remaining with the original mark up line around it, and nothing changed within that area.  Same applies to all the variations offered.  Frustrating - to say the least!

[johnrellis]

@nick1804: "when I select and brush over something I want to remove, the system goes into action - but having finished, all I get is the area I selected remaining with the original mark up line around it, and nothing changed within that area.  Same applies to all the variations offered."

Check the Opacity slider -- it should be 100. If it's set too low, then you'll get the symptoms you're describing.

[Paul5EF7]

When it works it's great, but unfortunately 90% of the time, Generative Remove is more like Generative Replace. I tried to remove a dog that strayed into shot and it replaced it with a BEAR! 

[Ian Lyons]

@paul5EFA 

If the AI model is relacing instead of removing, then it's very likely that you've not fully selected/masked the item to be removed. Shadows, reflections and projections not included in your selection/mask will also causethe AI model to replace.

You can see how to avoid this in the below linked tutorial.

https://www.lightroomqueen.com/generative-remove-replace/

[sennadeep]

ótimo!

[Karine378360189fhd]

Je viens de découvrir IA Générative et je trouve cela trés simple d'utilisation et l'effet final et super. Trés pratique. Merci

[sb2314]

It is definitely a "game changer" in eliminating distractions.

[MarcySB]

Once again, I have to go to Photoshop. All I want to do is remove 4 thin power lines covering clouds. I've tried 3 times and it has done a pretty bad job. I was able to remove power lines in the same photo that were over land - it did a much better job there.

[johnrellis]

@MarcySB, "Once again, I have to go to Photoshop. All I want to do is remove 4 thin power lines covering clouds. I've tried 3 times and it has done a pretty bad job."

Did you use one of the Generative AI tools in Photoshop or some other tool?  Which one?

[MarcySB]

I used the remove tool on the power lines and poof - they were gone!

[weesiejoe]

With this latest update, I now am unable to move the defined source using the Heal tool. The new feature works well most of the time, but I really like the Heal tool for being able to define a source in certain cases. Is anybody else having trouble not being able to move their source sample selection when using heal or clone?

[Ian Lyons]

@weesiejoe 

That behaviour is bug discussed in https://community.adobe.com/t5/lightroom-classic-bugs/p-remove-tool-clone-and-heal-is-missing-source...

However, it has been fixed in LrC 13.3.1 that was released earlier today (Tuesday 4 June). You should able to download same via the Creative Cloud App

[Courtney23926875puoy]

so far for me its struggling with high key removals

[Ian Lyons]

Can you post a screenshot of the image your've having trouble with?

Use the mountain button (see attached)  on toolbar to upload your screenshot.

[AlannaStLaurent]

Much better than the remove tools in LR. Would love for it to be able to copy and paste to other images (for example, I remove an object and I would like to copy that removal to other bracketed images in that series). Instead I get this message when I attempt to do so (see attachment).

[lisac61174007]

I'm not loving this. It's way too slow. I don't want to click apply after each stroke. The previous erase tool was great for erasing little spots quickly. Please bring that tool back, even it's a separate tool.

[Ian Lyons]

The previous Heal and Clone tools are still there. 'Generative AI' is new and enabled/disabled via check box. It's is in addition to Content-Aware Remove, which was added in October 2022.

[Victoria Bampton LR Queen]

And if you want to skip the Mask Refinement (where you're having to press Apply), hold down Ctrl (Windows) / Cmd (Mac) while you're drawing the stroke.