• Global community
    • Language:
      • Deutsch
      • English
      • Español
      • Français
      • Português
  • 日本語コミュニティ
    Dedicated community for Japanese speakers
  • 한국 커뮤니티
    Dedicated community for Korean speakers
Exit
0

Question about setting the black point

Enthusiast ,
Jun 16, 2021 Jun 16, 2021

Copy link to clipboard

Copied

My document has a Gray Gamma 2.2 profile. The image consists of 53 cells arranged left-to-right and top-to-bottom (like English text). The first cell (at the upper left) has an RGB value of 255 and the last cell (at the lower right) has an RGB value of 151. Each cell is 2 RGB units darker than the previous cell : 255, 253, 251, ..., 153, 151.

step table-1.jpg

 

I want to normlize this image to have a full tonal range from white to black. In other words, I want the first cell to remain white, the last cell to become black, and the intermediate tones to be evenly distributed over the range 0 to 255.

 

Using a Curves adjustment layer, I set the black point on the last cell. But instead of setting its RGB value to 0, it sets the value to 1: 

step table-2.jpg

Clearly there's something I don't understand about black point. I always thought black was 0.

 

Why does this happen, and what should I be doing? It is essential for my application that the last cell have an RGB value of 0.

Views

2.1K

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines

correct answers 1 Correct answer

Enthusiast , Jun 17, 2021 Jun 17, 2021

I'm convinced it's a numerical problem that has nothing to do with the document profile. In the grid I attached, each cell is 5 RGB units darker than the previous cell. If I use a grid with the same number of steps, but where each cell is 3 units darker than the previous cell, setting the black point on the last cell makes that cell (0,0,0). The result is the same regardless of the document profile.

 

step table-3.jpg

 

 

Votes

Translate

Translate
Adobe
Mentor ,
Jun 16, 2021 Jun 16, 2021

Copy link to clipboard

Copied

In your Color Settings you will find "se Black Point Compensation".  Is that selected?  Try applying a Gamma of 1.4 instead of 2.2, just to see if there is a change.  Gray Gamma may not be the same as Gamma.  In your first chart, obviously you have Grays, but I am not sure why you would be interested in Blacks at all?  What do you mean by "it is essential for my application"?

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
Enthusiast ,
Jun 16, 2021 Jun 16, 2021

Copy link to clipboard

Copied

In Color Settings I have Relative Colorimetric and black point compensation set. I converted to RGB profile and the same thing happens. I think it's a numerical problem.

 

I'm printing on clear film to make digital negatives for darkroom printing. Black is needed to fully block light during exposure. If it's not pure black, some light will get through and the print will not achieve paper white.

 

I solved the problem temporarily by masking pure black over cell 53. But I'd still very much like to understand why this happens.

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
Community Expert ,
Jun 16, 2021 Jun 16, 2021

Copy link to clipboard

Copied

For photographic editing, setting the endpoint is usually done at a less than full black value and the tonal range is set in the relative darkest part of the photo with detail, as opposed to the absolute darkest part. So perhaps your values are not set to 0r0g0b? Although this screenshot uses curves, it is also available using levels, double-click the eyedropper.

 

shadow-target.png

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
Enthusiast ,
Jun 16, 2021 Jun 16, 2021

Copy link to clipboard

Copied

The inverted image is printed on film using a RIP to control ink density (I mean actual transmission density, a logarithmic value). I need black (which, after inversion becomes white) not to lay down any ink on the film. I prepare the file in Photoshop (which is what you see here), then export a tif which I print with the RIP from another application.

 

I tried several ways of doing it, all with the same result. In fact, the first way I tried was using a curve adjustment and sliding the Black Input over to 151, just as you did in your screenshot.  But wait, I see you used 152.  Sure, that will give you black in the last step, but the tone won't be evenly distributed. 0, 3, 8, 13, 18, ...

 

By masking black over the last cell, I localized the non-linearity: 0, 6,11,16,21.

 

Even if there's no clean way to fix it, I would like to understand why Photoshop does this.

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
Community Expert ,
Jun 16, 2021 Jun 16, 2021

Copy link to clipboard

Copied

If you are using RGB numbers, the file must have an RGB profile embedded, not a grayscale profile. For Gray Gamma 2.2, the exact equivalent is Adobe RGB, also a clean gamma 2.2.

 

Otherwise you get recalculations via your working spaces, and that can introduce errors.

 

In particular, sRGB could do this. It doesn't have a clean gamma transfer function, but an idiosyncratic curve with a flat toe near black.

 

You could change your working spaces, but better to embed the correct profile. This will always override the working space.

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
Enthusiast ,
Jun 17, 2021 Jun 17, 2021

Copy link to clipboard

Copied

As I understand it, a document with profile Gray Gamma 2.2 profile has a single channel (gray) and 256 gray levels: 0 ... 255.  It's just like RGB, except there's only one channel. So RGB numbers are perfectly fine with a grayscale profile.

 

If I convert to profile Adobe RGB, I get the same numerical problem:  setting the black point on any cell gives that cell an RGB value of (1,1,1).

 

I tried converting to a custom gamma 2.2 profile with all variations of rendering intent, black point compensation, and even conversion engine. All give the same result: black is 1 or (1,1,1) if the profile is RGB.

 

I attached the document "Spyder-53.tif" for anyone who wants to try it. 

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
Community Expert ,
Jun 17, 2021 Jun 17, 2021

Copy link to clipboard

Copied

You're missing the point. If the image has a grayscale profile, all RGB numbers will be recalculated based on working spaces. You're not inputting or reading the numbers directly.

 

If the file has an RGB profile, then the RGB numbers you set are direct input. If you set 0-0-0, it is 0-0-0.

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
Enthusiast ,
Jun 17, 2021 Jun 17, 2021

Copy link to clipboard

Copied

Maybe you missed what I said in the preceding post:

 

"If I convert to profile Adobe RGB, I get the same numerical problem:  setting the black point on any cell gives that cell an RGB value of (1,1,1)."

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
Enthusiast ,
Jun 17, 2021 Jun 17, 2021

Copy link to clipboard

Copied

LATEST

I'm convinced it's a numerical problem that has nothing to do with the document profile. In the grid I attached, each cell is 5 RGB units darker than the previous cell. If I use a grid with the same number of steps, but where each cell is 3 units darker than the previous cell, setting the black point on the last cell makes that cell (0,0,0). The result is the same regardless of the document profile.

 

step table-3.jpg

 

 

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
Community Expert ,
Jun 17, 2021 Jun 17, 2021

Copy link to clipboard

Copied

Consider creating the grid in device-independent Lab Color where the Lightness (L) values run from 0 to 100 and may be set in the increment that serves your purpose. In addition you are not limited by a choice of a specific profile. That  would increase the file's utility. The  a  and  b  values should be set to zero assuring you of a neutral black. 

Votes

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines