Adobe Media Encoder

two days that i can't use encoder to render my AE video composition.i always had problems, i do from AE to ME nd NEVER WORKS...so i have to oper ME and import external project.NOW IT DOESN'T WORK EVEN IN THAT WAY!! there is a message "problems with our server" OK, BUT I PAY EVERY MONTH ... try to esc from the system, try to resume the macOS, try to lock and unlock "Portachiavi" Nothing, nada, niente.render by AE means 234 GIGA... madness.WHY I PAY SOMETHING THAT DOESN'T WORK?????????WHY I HAVE TO LOST HOURS AND HOURS AND HOURS in my day FOR YOUR PROBLEMS??????????

Hello,Day Before Yesterday I Had Downloaded AE and Adobe Media Encoder 2017 and installed those both.After Completion Everything.I had Opened My AE Project, which I had saved before formating my PC!After Opening It, I Clicked On Export>Add To Media Encoder Queue.AE Gets Not Responding for 30-40 Seconds.Then As usually AE Displays. Media Encoder is not getting Opened.So, I downloaded After Effects And Media Encoder 2018 Version.After Completion Of Installation!Opened My AE Project, Clicked On Export>Add To Adobe Media Encoder Queue.AgainAE Gets not responding for 30-40 seconds.Same as usual AE Displays.Media Encoder is not getting ON! Please Help Me Out From This Problem Sorry For R.I.P English

Short version:-Editing project with mpeg2 (.mpg) file -the mpeg2 file was originally an mp4, rendered it with Media Encoder to convert to to mpeg2 as experiment (mp4 was horrendous to edit with, timeline was extremely laggy) -worked surprisingly well, editing became a dream -made only 9-12 simple cuts, queued it in media encoder, makes it through the audio process just fine, but fails IMMEDIATELY after the audio portion is done-tried exporting with only Premiere, worked just fine-file format was set to export to mp4 (H.264) for both attempts other notes:-Media Encoder set to Mercury Playback Engine Software Only-GPU Acceleration is on in Premiere-cleared cache-tried exporting in new .proj, same issue-no third party plug-ins used  Error message: - Preset Used: Custom- Video: 1920x1080 (1.0), 29.97 fps, Progressive, Software Encoding, 00;01;27;02- Audio: AAC, 320 kbps, 48 kHz, Stereo- Bitrate: CBR, Target 10.00 Mbps- Encoding Time: 00:00:0210/05/2020 04

Hi. The Media Encoder burns my After Effect project until it's finished, I can play and watch the finished movie but it lagging and in between got strange freeze-pictures like the one under.   I updated to the last Software and drivers, and burned it out on 2 different computers for testing. The only error message is: "Can not write XMP data in output file". Please any help since my deadline is closing up. Fillock 

When trying to export an After Effects composition through Media Encoder it exports the video layer as color bars while the effects layers are working.  Why is this?  I have cleared the cache and changed the render setting, but they only fix the problem temporarily.  Is this a bug?  Please help.

Hello,Win 10. I record video using Panasonic G80 to AVCHD 1080 50p and try to export it using Adobe Media Encoder 2020 to MOV Apple ProRes 422. In Export Settings Summary Output I have 50 fps but Encoder still exports it to 25 fps and I need those 50fps for time remapping in Ae. Why is it happening? Can you help me somehow? Thank you

Can anyone explain what is going on? I am exporting a number of very simple 2 stereo track one video track 6 minute videos from Premiere. Yet, ME will spend an hour "preparing" the audio, often between 35 and 170 tracks!!This is not an isolated event, it's happening on every export. There is no rhyme of reason to it.  Using 14.3.2. No effects have ben added to the audio whatsoever.Has anyone seen this before and is there any workaround. It's really annoying that it takes 8 minutes to export the video and 90 minutes to "prepare" simple audio. I attach a couple of screen grabs to see if anyone can sort this out. It's incredibly annoying! 

Hi, Where can I find the meaning of error codes during export? I have a code -1609629695 that stops my export. No problem during the preview ... Thank you

I read this article about the smart rendering capability in ME / Premiere: https://helpx.adobe.com/premiere-pro/using/smart-rendering.html What I'm getting from this is that if I have ProRes 422 HQ as my source codec and as long as I match the export settings of codec, frame size, frame rate, and bit rate to my source file, it will not recompress the file when exporting? It will be, in a sense, a "lossless" export? To confirm, my workflow often involves changing the following settings on files: Field OrderPixel Aspect Ratio (labelled as "Aspect" in Media Encoder, assume accompanying "Stretch to Fill" source scaling mode)In / Out Point (sometimes by chopping up a file in a Premiere sequence) Can somebody from Adobe please confirm changing these settings and only these settings will not result in a recompress of my ProRes 422 HQ and ProRes 4444 masters?

Hey Guys,                 Just updated the CC suite to 2018 versions and i was really enjoying it until i ran into the an error in AME the read as follows.Encoding Time: 00:00:0001/27/2018 09:17:46 PM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Export ErrorFailed to create encoder.Writing to file: \\?\C:\Users\Damon\Desktop\Paddle Boarding.mp4Writing file type: H264Around timecode: 00;00;00;00Error code: -1610153464------------------------------------------------------------I have no idea what this error is or how to fix it.Bellow i have listed the export settings that i am trying to use.I will also list my system specs for my laptopProcessor: Intel i5 5200 @2.2GHz Ram: 8 GBGPU: Intel HD 550 Series GraphicsStorage: 256GB SSDOS: Windows 8.1Thanks in advance for any help I getDamon Caller

After updating.  Any ideas? 2017 iMac, Quad-Core i532gb RAM   

After the last update it got pretty slow.

Hello everyone, I have an After Effects project file that does not use any third-party plugins. I have downloaded 4 project files from Envato and imported them to my project file. One of them seems to cause the Encoder to fail the export (I will call that file A) [The error code i get is: -1609629695. Adobe help center or the information i found in the community did not help.]  File A when opened individually in After Effects renders perfectly through Encoder. And the main file that i imported A also renders perfectly if i render it from After Effects.  If you know why file only causes problems when inserted into another project file and only when rendering from Encoder, please inform me. You can find the log file in the attachment and additional information about my graphic card and rem below.  All of the Adobe programs i have installed are up to date.   Windows10 Home64GTX1060 6G16 GB RAM If you need any aditional information to

I am a beginner student learning to use adobe. I have most of my experience using small clips, in mp4 h.264 codec (I learned that today). I bought a new workstation that has some powerful hardware but I still have some lag, the computer manufacturers told me to change my codec for editing rather than using h.264 out of my camera and it will run really smooth. I need some help with a basic workflow of each step I should do to upload my files and how to save them, how to change the codec from h.264 to something to edit with, and then how to render this out into a h.264 final video file again. Of course if my list is not the best choice please let me know what steps I should take: I am a beginner and need simple help. thank you 

Hello, whenever I open media encoder v 14.3 -- it crashes and can not start. I can export from Premiere, or After Effects, and also I'm able to use ME CC 2019. I've tried unintalling prevous versions and only  installing the new one. No go. I'm including the crash-log for your inspection.  Right now I can only use old versions. MacOS 10.15.6Model Name: iMac Pro  Model Identifier: iMacPro1,1  Processor Name: 10-Core Intel Xeon W  Processor Speed: 3 GHz  Number of Processors: 1  Total Number of Cores: 10  L2 Cache (per Core): 1 MB  L3 Cache: 13.8 MB  Hyper-Threading Technology: Enabled  Memory: 128 GB  

I have been exporting :10-:15 sec spots using this setting and the bitrate noramlly passes, whcih needs to be 49.5-50.5 but for some reason when I export a :05 spot the bitrate comes in smaller 49.1 which get rejected automaticly. I can't find a bitrate setting with this option. From what I find XDCAM50HD should be exporting at 50mbps. Is that correct? Does anyone know how I can correct the bitrate for these smaller :05 spots?

hi,   I am rendering video in image sequence files, and I know AfterEffects has a function to skip existed files.  This comes very usefully when I need to delete some sequence and re-render that potion.   Now, I am wondering if Media Encoder has the same function...   I am rendering images in .tga now.  I wish MediaEncoder has .PSD... Thanks

I'm using the plugin https://www.fnordware.com/WebM/ And for vp8 encoding I can max the bitrate at 10,000kbps Anyway to go over that because most of my 4k 60fps videos are around 22,000

this is the first problem that i've come across while using AE/ME, and i've tried solve it on my own but am unable to. my media encoder has been acting up lately, and when trying to export it edits, ME either says endlessly tries to connect to the server, or starts to encode and then gets stuck at around 40%. does anyone have any ideas of how to fix this?      (i have tried to put the project into a new composition and file hoping for that to change something with no luck)

Hi, I'm trying to set a script that adds image sequence to Adobe Media Encoder, but i can't find the arguments that i need to pass. I believe i need to use this function "app.getFrontend().addFileSequenceToBatch()", but the problem is i can't find any info about it.The other function "app.getFrontend().addFileToBatch()" works fine, but i need to be able to add image sequences also. Thank you 

i have installed newest version but still crashed.pls help. i use mac ios catalina 10.15.6  

Hi, I have been having some problems with rendering *I think it is on the rendering side* I am taking a 4k video and running a key on it and putting it in front of a picture. The picture (seen below) is about 6600x2800 and when I make the sequence from that photo and render it white dots appear around my keyed footage. But! When I make it from the 4k footage, and then shrink the photo to fit, and then shrink my talent to fit in the photo correctly (inside the letterbars) No more white dots! But this means that I have to adjust for this for every cut, and quite frankly I should have to.So is this a media encoder error? an Ultra key error? (NOTE: the playback is FINE before rendering) or an error somewhere in premiere?  And any idea how to fix it? 

so, when I try exporting my animate file in h.264 format (mp4) I get an error message when I start the cue, i get this message: adobe media encoder failed to encode with the following exception: App.getscriptenginename is not a functionplease help I need to export a video with a transparent background so I can't just screen record it anymore

I am running MacOS Catalina 10.15.6 on a MacPro 2019.  AME version 14.2 runs successfully, but no upgrade since 14.3 has worked (all crash at startup).  I was also getting the same problems with Premiere Pro, but that now launches on startup (since updating to 14.4). I also have a MacBookPro running MacOS Catalina 10.15.6 and have the exact same problems on that machine. I am running same plug-ins on both so it could be a plug-in crashing as common to both set-ups?  Is there any log file I can consult which would indicate if a specific plug-in was causing  ME 14.4 to crash at the same point on both machines? I notice I am not the only person having problems starting AME versions on Mac 10.15.6

Hi,I would like to use some 30fps footage in a 25fps timeline. I use media encoder to convert all my footage prior to editing in premier pro. My question is, if I encode 30fps footage in encoder does this remove the need to interpret in premier pro?I'm using drone footage and I'm experimenting with slightly slower motion, I want to keep it as smooth as possible. Thanks,Tim