Adobe Media Encoder

Dear all I have managed to compress a 712mb MP4 to 145 mb H.264 after following a tutorial on you tube and making a cusom preset.  The results are not bad at all, excpet, the sound is now out of sync :-(. I thought I would be clever and opened my shrunk video in pro, I was able to sync up the video but when I went to export I was back at my big video file again!!  Can anyone offer any exaplanmation as to hjow I can sync this up or what I need to change in my preset to make the sound sync up in the first place  I have to stay within the adobe suite so cant wash this through any third party software. 

Good day, Im getting this error when i send my project from AE to media encoder via the AME Queue kink in AE.So basically it opens Media Encored and loads the file in there. But as soon as you try to click the preset or start the render it gives me this error. It searches for a while then just pops this error. (Could not read from source. Please check the settings and try again) Please see attached picture 

When I complete a project and proceed to Export, it allows me to choose MPEG4 format but renders the video with a 3GP extension. The devices I work with do not read the 3GP extension. It has to be MPEG4. I looked to see if I could change the setting but found nothing. Attached is an image on the Export screen. I have no idea how to change this and need assistance! 

I've animated gifs with Photoshop and Media Encoder but those are not in the same quality! I'd checked "Use Maximum Render Quality" in Media Encoder already but Photoshop exports better one.

No Output Preview is visible during HLG Encoding.

There are at least 2 times that Adobe Media Encoder steals focus from foregrounded windows, even when minimized, and even if AME is already the foregrounded window (basically resetting focus from itself). In any variation, it is extremely annoying, prevents me from getting any work done until the behavior subsides, and potentially can have disastrous consequences if typing, dragging, or clicking something important (for example, the behavior would cause the user to fail a foregrounded biometric typing verification). 1) After starting an item in AME's queue, or upon reaching the 2nd VBR encoding pass, the Queue panel will flash focus for about 30 seconds afterwards. Even if the Queue panel already has focus. Entering AME and selecting the Queue panel to "satisfy" it has no effect.2) After a queue item is completed, the Encode panel will flash focus for about 30 seconds afterwards. Even if the Encode panel already has focus. Entering AME and selecting the Encode panel to "satisfy" i

MediaIncoder does not work! I send for render from After Effect and the render does not start! It can stand for many hours!The latest version of MediaIncoder! I even uninstalled it and reinstalled it, it didn't help! It started recently! I noticed that the After Effect is slightly different in version AE 22.01IU 22.0. What should I do? Helpeeeee !!!!!

Hi everyone,this is not a joke. How much cost Adobe Media Encoder as a single application monthly? Is it possible to get the answer in Euro?

I’ve been looking into the Effects panel in AME and I found a way to overlay Images on export. Is there anyway to composite an Image in the back of the clips using AME? Or even just a solid colour.Looking for a way to make efficient preview files out of my clips with alpha, that doesn’t burn them all in with a Black background. Ideally it can be done with the watch folder for an even more optimized workflow!

My company use the XDCAMHD 1080i50 codec in an .mxf wrapper as a delivery format. We use windows computers in the studio to edit and export material, and Macbook Pro for our people in the field. Using the same preset in Media Encoder as the windows computers, the Macbooks sometimes produce files with errors. They appear as lagging in the image in everything from half second blips one time during the whole file to lags once every 2-3 seconds throughout the file. On close inspection the "lags" are really frames playing in the wrong order. Example, it will play frame 4-1-2-3-8-5-6-7. The errors are inconsistent, but will only occur on Macbooks. You could get 4 good files from a machine and one bad. Several exports from the same machine using the same raw material will produce errors in different places in the file. Have anyone encountered this?   

I've been running into a bunch of render hangs in Media Encoder 22 with a few of my projects, and I've been wondering if there's a way I can export a project from After Effects 22 (just what I've been working in), and queue the render in AME 21, or really any supported older, and more stable version.It doesn't look like there is any option to choose which version to favor if I have them both installed, and it will automatically try to queue the export in AME 22 even when it's uninstalled? (I get error 5027::12 when I try.)Is this an option to work between versions, or do I need to work from both AE 21 and AME 21?

Are there any known bugs, or have issues been fixed so far with Media Encoder?I am still on Mac Catalina

I be getting Media Offline error message when Trying to convert my PNG files into 1 video clip. So, i tried Youtube tips, where was said that i have to uncheck THIS (picture) feature but there's no way for me to do it. Its uncontrollable i cant do nothing. How am i supposed to deal with it?

Hello    I am using GeForce MX350 and when rendering after effects project in Media Encorder it is not using my graphics card . It is already set to CUDA . When i render premiere projects directly from premiere pro (NOT FROM MEDIA ENCORDER) it is utilising graphics card . But I dont know why media encorder is not using it . Can you give me solution

I have a watch folder set up within Media Encoder 2020, I've noticed that sometimes the encoder will look as though it is finished, and it uploads to my Vimeo account, however it has only encoded the first minute or so of the video, then running the same file through again it completes the full video, has anyone else experienced this?Most of the exports come out of Avid Media Composer. Currently running on macOS High Sierra Version 10.13.6.

It has come to my attention that after updating my Premiere pro and Media Encoder to the newest version [2022], it cannot export my video whilst using H.264 file format. It is so frustrating seeing that after several hours spent - it cannot be finished due to having export error. What I want to know is: 1. Are there any alternative routes to make it work? 2. How to fix this? The error as follows:  - Encoding Time: 00:00:0911/02/2021 03:13:12 PM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Export ErrorError completing render.Writing with exporter: H.264Writing to file: \\?\C:\Users\raitot\Videos\10_Cardio Endurance.mp4Writing file type: H264Around timecode: 00:00:00:01 - 00:00:00:22Component: H.264 of type ExporterSelector: 9Error code: 3------------------------------------------------------------- Encoding Time: 00:00:0111/02/2021 03:16:45 PM : Encoding Failed-----------------------------------------------

On rendering with Adobe Media Encoder, from an After Effects project which uses a 20.0 fps frame rate (there are other videos from the client that also use non-standard frame rates that I colud have chosen), Media Encoder with "Match Source" selected puts the frame rate at 23.976 fps instead of 20.0 fps (the actual source frame rate). Note: I am rendering to the H264 codec.1) Why does Adobe Media Encoder not match the source frame rate in this case? It says "values may be constrained by the output format" but as far as I know, there is nothing about the H264 codec that limits it to just what Media Encoder has in it's very limited list box of 12 frame rates. Note. 20.0 fps isn't in the list box. Nor are other frame rates which I have also wanted to use. What if I want to use any frame rate from eg. 5.0 fps to 120.0 fps for outputting with H264? Note: The original source video the client sent is AVC (same as H264) High@L3.1, 20.0 fps.2) Is there any way to make Media Encoder use the corr

I'm using a TNT drive to encode locally saved videos and save them on an amazon s3 drive. Whenever I try to import mov files, I get this message which also says "please check that the file exists with correct permissions. I checked, and they do. I even renamed the mov to mp4 because I read somewhere that worked for someone else.I reinstalled AME, and nothing is working. Please help

I just converted multiple WAV into AAC Files - the duration of the files after converting always turned out way longer than they were before! Even more bizarre is the fact that the files in any media player (Windows, Groove, VLC, Quicktime) were different to the duration showed in the details of the file. I.e. original WAV File was exactly 60 seconds, AAC File Details showed 01:06 and when played in a media player, it would be between 01:03 to 01:01, but never 60 seconds. When putting both files in  audition, they look exactly the same. Also, the longer the file, the larger the gap between actual duration of the wav to the aac file. Like a 15 minute WAV File would be around 16:37 after converting it into AAC and the media player would show something like 15:45. I’m super confused and have no clue why this is happening. I also tried different parameter when converting by changing the kbps rate for example.

Rendering a series of premiere projects. Got most of the way done when suddenly they started taking longer.Nothing changed, no updates, no settings changes except for the sound when ME is done rendering, and I have most of the space free on my drive. Even going back and rendering the same project again leads to 6x longer render times then before. My fans run significantly lower then they did before so my hardware is seemingly just not being used. Switched back to just rendering in Premiere but now Media Encoder is actually completely useless. Trying not to lose my job over this.

So i have a composision and it looks perfect on my After Effect but when i export using ME for some reason it's not the same as what i have in After Effect. It's small video in GIF format i'm doing. I'm on new Macbook pro with M1 Max not sure if their is issue with the support of the new chip?  

Bonjour, j'ai un problème avec Media Encoder, dans un premier temps, lorsque je fais l'exportation, une fois arrivé sur les parties comprenant des effets, l'exportation se coupe et lorsque je regarde le message d'erreur voici ce qu'il s'affiche :"Erreur lors de l’exportationErreur de compilation vidéo. ^ n ^ nErreur de rendu accéléréImpossible de générer l’image.Écriture avec l’exportateur : H.264Écriture dans le fichier : /Users/thomasdumont/Desktop/apparition logo.mp4Type du fichier d’écriture : H264Autour du code temporel : 00;00;52;00 - 00;00;52;08Rendu au niveau du décalage : 52,052 sComposant : H.264 de type ExportateurSélecteur : 9Code d’erreur : -1609629695"Autre problème que je ne comprends pas, ma vidéo de fond n'apparait pas sur le rendu et à la place j'ai des rectangles de toutes les couleurs (voir photo) , pourtant sur AEffect je n'ai pas de problème avec cette vidéo, alors quel est le problème svp ? Par avance, merci ! &#128591

I'm rendering a rather large video file in After Effects, with effects on top of green screened elements, and it seems like I'm runnning into a lot of bugs with the Primatte Keyer plugin. So, I've been rendering the green screened elements out as PNG seqences through After Effects' render queue.The problem is that the AE renderer (while faster than AME) is much flakier, and crashes every few hundred frames. I render to PNG sequence, and pick "RGB+Alpha" in the channels dropdown.Where is this option in Media Encoder?It looks like I get the option to pick " render Alpha Channel only", and "include Alpha Channel", but in both cases I get a solid black background, and not a transparent one.I've included 2 shots of what I'm seeing in AME, and 1 shot of what I have in After Effects.  I'm basically pre-rendering a PNG sequence to put back into the larger working file so it's not referencing the actual greenscreened effect and crashing, or glitching the render.

Max Media encoder recently got very slow. Yesterday it worked perfectly fine, now it is very slow and needs 2 hours for 1 minute video my PC is usually very good...Btw every project is rendering slow maybe I just changed a wrong setting 

The following problem:Movie completed in 2 languages (D + GB). Film D is rendered out via the Media Encoder queue.I then reset the render status, deactivate the D-audiotrack and activate the GB-audiotrack.Result: Film is rendered out again, unfortunately again with audiotrack D.Question: Can I change this procedure so that the current timeline changes are rendered when the Media Encoder queue is processed again?