Bug Reports

Hello!There is a behavior change that had existed in many earlier versions of Photoshop that no longer works, and though it appears to be minor, is wreaking havoc on my complicated actions and workflows. I am running this on an iMac, MacOS 10.14 Mojave.Expected behavior (2018 and earlier):I click on a folder or layer in the Layers palette.I hold down [command)+New Folder button at the bottom of the Layers palette.A new folder is created BELOW the originally selected folder or layer.New behavior (2019):I click on a folder or layer in the Layers palette.I hold down [command]+New Folder button at the bottom of the Layers palette.A new folder is created ABOVE the originally selected folder or layer.This is the same behavior as if I did not hold down the [command] modifier.Please fix this.Thank you,Bruce

I am trying to use the monotone/duotone options in Photoshop 2019. I choose my color and click on the curve to adjust the values. If I decide I don't want a certain value in the box, I delete it, but instead of staying as an empty box it will place a 0 (zero). When you click OK, this causes the curve to go completely wonky. This did not happen in previous versions. Anyone else having this issue? The attached is just to show the zeros in the boxes (box 30, 80, and 95) where they should be empty. Even when I tab over to the next boxes a zero will be inserted.I have updated to the most recent Photoshop  20.0.1 release hoping this would have been fixed but the issue is still there.

Found a problem. With latest version of PS and Nvidia drivers - eyedropper tool cannot sample colors outside PS window. it only samples black. Here is my full test case: https://forums.adobe.com/message/10230354#10230354

I have mentioned this earlier, but I think the smoothing effect in photoshop behaves wrong. THe main smoothing works, but the way it catches up doesn't make sense and is very annoying when painting. What I mean is that you move the brush to a new location, with smoothing on it lags behind, but when you stop the cursor, the stroke stops a certain distance from where you end your stroke. So you have to guess when you should stop paint for the line to stop at the right place. The stroke should have a minimum speed and maximum speed (which is what smoothing % increase/decrease), so it catches up with the cursor like a trail in water or as how inertia would naturally behave.

When I mouse over photoshop it brings the window to top. This is really annoying. I use "Activate a window by hovering over it with the mouse" / Mouse follow focus / XMouse window tracking. To enable this, follow one of the directions listed here https://superuser.com/questions/954021/how-do-you-enable-focus-follows-mouse-in-windows-10 or use this tool https://joelpurra.com/projects/X-Mouse_Controls/

Help, I download MacOSmojave and now photoshop cc 19 keeps crashing I have uninstalled it and installed it again, I have shut my iMac down and opened again with the shift key to reboot, can some one help me please

Save crashes CC2019 works in CC 2018<xml version="1.0"><!DOCTYPE AdobeCrashReport SYSTEM "AdobeCrashReporter.dtd"><crashreport serviceVersion="2.0.3" clientVersion="2.0.3" applicationName="Adobe Photoshop CC" applicationVersion="20.0.1" build="20181029.r.41" source="Windows-Client"><time year="2018" month="12" day="18" hour="9" minute="13" second="0" timeoffset="-300" timezone="Eastern Standard Time"/><user guid="0d19c2bc-7755-4fcd-a9e9-8f89bd2836f1"/><system platform="Windows 10 Pro" osversion="10.0" osbuild="17763" applicationlanguage="en-us" userlanguage="en-US" oslanguage="en-US" ram="40885" machine="Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz" model="Intel64 Family 6 Model 45 Stepping 7" cpuCount="24" cpuType="8664" cpuFreq="1995 MHz"/><crash exception="EXCEPTION_ACCESS_VIOLATION" exceptionCode="0xc0000005" instruction="0x00007FF69747C6AF"><backtrace crashedThread="0"><thread index="0"><stackStatement index="0" address="0x00007

In the Save/Export-dialogue:When I want to save a file and I click on a name in the folder I'm in, PSD not only takes over the filename but also the extension, which if course is wrong.You can see it in this very short movie I made:http://www.hoch7.ch/custom/psdFileextension.mp4Best, Lorena

I saved a psd file that I had been working on for days. I was saving as I was working on it, just in case. Yesterday, I saved it onto my desktop, and closed the file. I went to open it directly afterwards, and I got the error message: COULD NOT COMPLETE YOUR REQUEST BECAUSE OF A PROGRAM ERROR. I went to the forums and tried some of the thing recommended. I tried opening it on CC 2018, 2017, 2014 all upgraded, including the Cloud, and it won't open my file in any of the versions. I am on a Mac OS Sierra 10.12.5. This is not the first time this has happened, it first happened in January, right after the new year, with about a dozen png and psd files that I had been working on at that time, that I now can't use or know how to open. They open fine in Preview, all the detail is there, but will not open in photoshop. Some of these files have massive amounts of layers, just thought I'd add this. To top this off, photoshop would not let me save some items in png format, and I couldn't figure o

Dont really sure, is it only my problem or common one, but...In previous versions of PS i can stop Image Processor process with Esc button, it was very helpful. Nowadays i have to close PS via windows process explorer... I think you shoud return back Esc stop button

Issue: Various edits made to the current document do not refresh the screen preview or the navigator panel until the canvas is clicked again, or a keyboard shortcut is invoked. This includes such interactions as showing and hiding a layer, entering quickmask mode, making a lasso selection, and using the Undo command.After trying numerous fixes, I eventually narrowed it down to a single preference which is causing the problem for me. The issue seems to be caused by disabling the "Start" Workspace in Preferences > General. I fixed the problem by re-enabling the "Start" Workspace. As soon as I re-enable it and restart, the issue goes away. I can reliably reproduce the issue by again disabling the option.Note: This issue began for me a couple weeks ago using CC 2017 18.1.1, and is still occurring after updating to CC 2018 19.0. I am on Mac OS X 10.11.6.See the video below for a comparison of the normal with the default setting ("Start" Workspace Enabled), and then with th

I recently upgraded to Photoshop CC 2019 from 2018 and more recently still, to Mojave. I'm working on an iMac 27 (Mojave) with 16 GB RAM. After installing the programs I set my color settings in the Edit>Color Settings panel to ProPhoto, selected the Profile Mismatches and Missing Profiles boxes, and lastly set the Advanced Controls: Desaturate Monitor Colors to 10%. What I'm finding is that if the computer goes to sleep or I turn it off then back on, all those settings are reset to the default positions. I tried making the privacy adjustment in my Apple Settings window as was recommended for CC 2018, I deleted my preferences, rebooted the program then adjusted my preferences again to the above, but none of this is helping. So far it seems to only be this panel that gets reset, but I'm not 100% sure of that. This is concerning as the stock agency I'm with requires the photos be in aRGB and I just discovered that they've been processed in sRGB because I didn't think to recheck the se

Photoshop CC 2014, CC, and CS6 mouse click getting stuck bug in Lion, Mountain Lion, and Yosemite, but not in Mavericks.Here's a very annoying bug that has been popping up in various versions of Photoshop and OS X over the past years. I have used many tablets and computers during this time, various versions of Photoshop and OS X, yet this bug remains. The only time I never had the bug was when using Mavericks.The bug involves about every 10th click on the INTERFACE (NOT ON THE CANVAS) getting "stuck". This means that I can click on a slider, a curve point, or anything that's not on the canvas, and even after releasing the mouse/pen, the interface will think I am still clicking until I click again.Video:https://www.youtube.com/watch?v=frZvR... may be an OS X bug since it does not happen in Mavericks but it does happen in Lion, Mountain Lion and Yosemite. However, it only ever happens in Photoshop, and never in any other app. Even in Photoshop, it only ever happens on the interface and n

I am using Photoshop CC (v 20).  As of the new update, when I attempt to duplicate a single layer or group of multiple selected layers, the duplicated layer(s) are re-positioned outside of the canvas.  I must drag them back to the correct location on the canvas.If I attempt to duplicate multiple selected layers at once in my layers panel, Photoshop will place them at the top of the layers panel and outside of the artboard the original layers are located in.

Photoshop v20.0.0 in adjustments layers the button Previous State does not workWindows 7 Pro.

I have a GIF I'm using for an animation. It has 375 frames/layers. I'm having trouble uploading it here (Bad Gateway) but the referenced Adobe Forums post at the bottom has the GIF attachment. (in the uploaded example all layers are white).When I open it in PS 19.1.6 I see all 375. Another user also tried it in CS6 & CC 2014 with the same result.When I open it in PS 20.0.0 I see only 119 layers/frames. The other user was able to reproduce this.See original adobe forums post for reference: https://forums.adobe.com/message/10701225#10701225

Photoshop CC v20.0.0 is showing weird visual artifacts when using a 'uniform color' layer with color blending mode. Simply create a new 'uniform color' layer with H:0o, S:0% and B:50%. Then change the layer blend mode to 'Color'. I have already disabled the graphic processor and restarted PS without success. What it worked is to install the previous version of Photoshop CC v19.1.6, where this issue doesn't appear at all.Could it be the new blending preview feature of the v20.0.0?I'm using a MacBook Pro early 2015 retina 13", having Intel Iris Graphics 6100. 

The list of extension panels under the Windows > Extension menuin PS is not alphabetized on Windows 10.  It used to be in alphabeticalorder, but is now in a random order.  This problem only appears to be onWindows.  My Mac still has the extensions in alphabetical order.The problem started with the last update to CC 2018.  I looked backat CC 2017 yesterday and saw the list no longer alphabetized there also, sosome update must have scrambled that list as well.While the list appears to be in random order, it is the same order eachtime PS is opened and in each version of PS.  So it appears that it isbeing sorted in some order by PS, just not alphabetical order.I have confirmed this behavior with at least three other people using PSon Windows 10 and have posted information about it in the Adobe forums:  https://forums.adobe.com/message/10737823#10737823

Multiple times per day when I hide Photoshop (command+h), go to do something in another application, then click the Photoshop icon in my dock, Photoshop won't come back. I can right-click on the icon and select "Show" but it won't come back. I also use hot corners, but when I mouse over to show all application windows, it says "No available windows." I have to quit the application and restart it. I can right-click and select "Quit," and it will work, rather than having to force quit. Then it will be fine for a few hours before it does it again. I am running Mac OS 10.12.4 and recently wiped my computer to reinstall CC applications because they were all lagging. (SO much rainbow wheel.) Since doing this, I've encountered this Photoshop problem.

switching 'relative' to 'absolute' in selective colour adjustment layer is not being recorded in my actionsAdobe Photoshop Version: 19.1.6 20180808.r.398 2018/08/08: 1185588  x64Operating System: Windows 10 64-bitVersion: 10 or greater 10.0.17134.1Note: This conversation was created from a reply on: Photoshop: Adjustment layer changes not being recorded in action.

*See videoSo in the new content aware fill taskspace when the full preview has finished rendering I'm having a problem where the image suddenly gets cropped with transparency and I cannot see the preview properly to see what I'm doing, its so annoying!Any ideas? I'm on a 2012 MacBook Pro, everything up to date (Mac OS Mojave + latest photoshop)Thanks  

The color blend mode is broken in CC2019  r.24Open a new document in 16 bit Adobe RGB profileFill layer with 50% greyAdd new layer and fill with a straw color (R214 B 212 G173 in Adobe RGB)Change blending mode to color Result is greenExpected result - darker straw colorWorkaround - enable legacy compositing

10 smart objects one for each frame in a 10 frame animation. Each frame is 1 second and I want to export each frame as a separate file (tried PNG, JPG, TGA and PSD). Export settings are set at 1 frame rate per second to get 10 images.Each time I render the image sequence it only shows the first frame for each image saved out.

I am able to add mask to a Frame Tool layer. The problem is when right clicking on the mask to delete it, it selects back the Frame Thumbnail

Just updated my Photoshop to Photoshop CC18 and now I am not able to define the size of my brush with my wacom pen. Using the right mouse key + ALT , it works as it is used to be but using the pen + ALT (using the button as right mouse key) I only can choose a colour. Can anyone help me ?