Lightroom Classic

In LR version 13.2, a video in a Publish Service Collection will fail to publish if the Publish Service has a post-process action installed and inserted. An attempt to publish a video will typically fail with either a This photo was not rendered or This photo is missing error message.   This has been tested with the Hard Drive Publish Service as well as the services SmugMug and jf Collection Publisher.  Post-process actions tested include Lr/Mogrify 2 and jf Metadata Wrangler.   This has also been tested with a new, "virgin" catalog and the issue persists.   It has been tested on MacOS 13.6.4; I have not tested it on Windows.   Workaround: Remove all post-process actions from the Publish Service.   Note: Unlike with the previous Assertion failed error present in 13.1, one can remove the post process action when publishing videos but reinsert the post process action when publishing still images; the mere presence of a video in a publishe

Lightroom Classic is really slow, everything including zooming, masking, panning.. Yes I have last drivers, yes I have studio driver, yes i setup driver to prefer max perfotmance, yes i have extra catalog for each shooting, i7 9700K + RTX4060Ti + 64GB RAM, fast SSD.. and this software getting more and more slow with every update. Is there a way to speed up LR?

I have multipul backups but cannot seem to load any of them it happened with a window mad swiich and to add insult to injury i cannot find the windows hard drives that i pulled when I took the home tower out.any any help will bless me. this has been devastating. 

I would like to remove the -2 at the end of my photo file names after moving them, that gets added if I did not clean out my import folder. Is it possible to automate this?

I just purchased a new camera, Panasonic Lumix FZ80D. I wasn't able to upload photos to Adobe Lightroom Classic and figured I needed to download to the latest version of the application. However, the download failed and I got the message that I wasn't able to overwrite with the same version. I'm sure I wasn't using the latest version but now I can't check because I can't open Lightroom at all and get the message "The application Adobe Ligntroom Classic can't be opened." What do I do now?   Doris    P.S. I have a MAC

Synchronize Folder sometimes shows photos as missing when they're not. To reproduce in LR 13.0.1:   1. Download and unzip this catalog folder: https://www.dropbox.com/s/rzpzmsn1cpc3xlg/sync-bug.2023.10.27.zip?dl=0    2. Open the catalog in LR.   3. Uncheck the option Preferences > General > Treat JPEG Files Next To Raw Files As Separate Photos.   4. In the Folders panel, right-click "pics" and do Synchronize Folder.   5. Observe that the three photos in the catalog are reported as missing:   6. Click Show Missing Photos and observe that the special collection Photos Missing From Folder "pics" contains the three photos, and they are not marked as missing:   7. Right-click "pics" and do Synchronize Folder again, this time checking Show Import Dialog Before Importing, unchecking Remove Missing Photos From Catalog, and clicking Synchronize.   8. Observe that the three JPEGs in the folder are shown for import. Click Import, and they will

  The shortcuts for "Select the Spot Removal tool" and "Flag photo as a pick" have been swapped. (P&Q) The manual says "Select the Spot Removal tool" is Q and "Flag photo as a pick" is P. In Lightroom, both shortcuts are written as Q. https://helpx.adobe.com/lightroom-classic/help/keyboard-shortcuts.html Win10、Win11、Japanese version

Raw defaults aren't applied to a Denoise DNG when the DNG is imported. To reproduce in LR 13.2 / Mac OS:   1. Download, unzip, and open this small catalog in LR: https://www.dropbox.com/s/ewd4kyct5pqw4t9/raw-defaults-bug.2024.05.19.zip?dl=0   2. Do File > Import Develop Profiles And Presets and import "Exposure = 5.xmp" from the catalog folder.   3. Set Preferences > Presets > Raw Defaults > Global to User Preset: Exposure = 5.   4. In the Library Folders panel, right-click the folder "raw-defaults" and do Synchronize, with Show Import Dialog Before Importing. Ensure that Build Previews: Standard and Develop Settings: None are set.   5. Observe that the raw default preset Exposure = 5 has been applied to IMG_9340.DNG (an Apple ProRAW photo) but not to DSCF2425-Enhanced-NR.dng (made with Denoise).    6. Edit DSCF2425-Enhanced-NR.dng in Develop. Observe that Exposure = 0.   7. Click Reset and observe that Exposure is now 5.

<moderator:> No actionable information - moving to Discussions  

Have been noticing since installing LRC 13.4, performance on my M1 iMac is very slow and now is causing serious crashes.   HW: iMac M1, 8GB RAM, LR catalog lives on an external M.2 drive.  Been using this drive and hardware for several years without a problem.  Disk Utulity shows external drive is fine. I have a large catalog (~2,5TB) setup on the M.2 with 1 folder per year, and subfolders using the YYYYMMDD_TITLE format. Since installing 14.6.1 yesterday, I tried to access a 2019 folder.  LR indicates there is noting there and I get a spinning beachball.  In a minute or two, LR crashes AND I get a notification that the external droive has been ejected.  My iMac requires a reboot for the M.2 drive to be recognized agaion. Acccessing the past couple of jobs/subfolders in the 2024 folder on the M.2 is OK ... slow ... but no crash. I can access the entire M.2 drive through Finder, and with other image programs such as NX Studio (Nikon

I am experiencing the spinning wheel every time I try to export a photo from Lightroom. This wasn't a problem until I loaded some presets. Now I'm not sure how to save my work or fix the issue. Does anyone have any ideas?  Thank you in advance!

Hi guys,My camera always sees my Extreme Pro Sandisk 128 GB memory card. My LRC on the other hand ... not always; it sometimes takes cajoling. Is it a matter of aging copper contacts (or whatever they are called)? Or is it jut dirt?  Any ideas?  Thanks a lot.

Whenever I open the Library Grid View and hover over a photo with my mouse, a tooltip appears the metadata I selected. If I hover over another photo, there is no there is no tooltip. If I hover onver the original photo there is no tooltip. If I leave Grid View and comeback, the tooltip only appears for the first photo I select.  Tooltips in Loupe View work fine. I'm using LrC Release 13.1 macOS Sonoma 14.1.2.    Any helap would be greatly appreciated.   Thanks, Phil

Hello, I am trying to see the full file path for a photo in grid view. By itself, the full path should appear when I hover over the folder field. Actually, the full path should be displayed, but nothing is displayed. The hand appears, but no path. Hovering does not seem to work.   Thank you

The Update AI Settings command hangs indefinitely when it is applied to a photo with a Sky mask to which Generative Remove has been copied/synced, and LR must be force quitted.   To reproduce on LR 13.   1. Download this tiny catalog, unzip it, and open it in LR: https://www.dropbox.com/scl/fi/x5xa41n0lv7dwc9z6f9rh/update-ai-settings-bug.2024.06.30.zip?rlkey=h0jzd2kxe7q4ni45ydo3ar34e&dl=0    Observe that 1.jpg has a Generative Remove applied to it, and 2.jpg has a Sky mask.   2. In Library, select both photos, with 1.jpg most selected.   3. Do Sync Settings with just Remove selected.   4. Select 2.jpg and do Photo > Develop Settings > Update AI Settings.  Observe the Updating AI Settings progress window opens but hangs indefinitely:   Clicking Stop has no effect, and you have to Force Quit LR.   5. The same symptoms occur if you invoke the SDK's photo:updateAISettings() on the photo.      

The new Metadata panel field Last Exported Date isn't formatted with the correct localized date format:     Tested in LR 13.2 / Mac OS 14.4.1.  

In LR 13.3, the History panel still uses pre-LR 13.3 terminology, referring to the tool as "Heal" rather than "Remove".  Here's a screenshot showing the application of all the different Remove modes with and without Generative AI and Object Aware, and then deleting them: Remove, selecting Generative AI, Remove Object Aware, Remove Generative AI + Object Aware, Heal, Clone.     The History steps also refer to "Gen. Remove", though the Remove panel uses the term "Generative AI". In general, the terminology is ambiguous and confusing, e.g. using "Remove" to name both the panel/tool and one of the modes, so being precise will at least reduce confusion a little.   There may be other History steps still using the old terminology -- I didn't do an exhaustive search.  

Using the Hour file-renaming token results in an internal error when LR is running in Polish or Russian. To reproduce on LR 13.3.1:   1. Set Preferences > General > Language to Polski and restart LR.   2. In Library, select a photo and do F2 (Rename Photo).   3. In the File Naming drop-down, select Edit (the last menu item).   4. Create the renaming template "Data (RRRRMMDD) - Godzina" (Godzina is Hour in Polish):   5. Click OK twice, and observe this error:   Translation: Internal error. AgDate.formatDatelnUserFormat: %W specifier not yet implemented.   6. Repeat the previous steps for Russian:   and observe this internal error:   * * *   This is a trivial bug to fix. In the corresponding TranslatedStrings files, all the other languages have  /AgNaming/Token/dateEvaluator_Hour set to %H (the Lua date-formatting code for "Hour with leading zero (24-hour clock)"). But the files for Polish and Russian have it set

The tool tip for Remove > Next Variation is garbled in LR 13.4 / Windows running in French:   This is caused by a typo in TranslatedStrings_Lr_fr_FR.txt:     "$$$/AgDevelop/Dust/GenRemove/NextVariation/Shortcut/Win=Alt + ^U + 2192"     It should be:     "$$$/AgDevelop/Dust/GenRemove/NextVariation/Shortcut/Win=Alt + ^U+2192"       Of course, this wouldn't have happened if the tool tip followed the convention used everywhere else in LR, with "Left Arrow" and "Right Arrow" used instead of ←and →, and if the developers used the Any Shortcut plugin to catch errors before release. (There's plenty of room in the tool tips for spelling out Left Arrow and Right Arrow.)

Lightroom Classic 13.0.1   We wszystkich tłumaczeniach występują dwa błędy 1. "Show More Labels” 2. "Use the Point Color Dropper to add samples"  we wszystkich tłumaczeniach te dwa zwrotu są po angielsku  

The Lightroom Classic Keyboard Shortcuts help shows a shortcut for the non-existent command Stack Visually Similar Photos:   https://helpx.adobe.com/lightroom-classic/help/keyboard-shortcuts.html   TranslatedStrings has entries that allude to such a command, but it's never been released (unfortunately!).

Hello! One of the files in my LRCC catalog on macOS ("lightroom catalog-v13 previews.lrdata") is very large, already over 25GB, and I don't have many photos, around 1,000 to 1,500 RAW files. In creativecloud I have about 5GB occupied. It seems that this file increases in size exponentially. Does anyone know if this really works?   [Moved to Lightroom Classic forum by moderator, according to forum rules. This is about Lightroom Classic after all]

How do I get lightroom to run on Widows 11? The error is 0x8007016A which deals with Onedrive, I tried what was suggested which was to remove the CURRENT file. I can't remove it but I can rename it, but when I try to run the program it just recreates the file and I get the error again.   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for any problem with software!]

When I try to start Lightroom Classic, it won't open and only loads for a bit. And when I look on task manager it doesn't show that it has started.   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for any problem with software!]