Hi, this is the error I constantly get since last week, I hope someone can help me with that!! Issue - Export failure, wrap stabilizer effects seems to be the cause (see picture)Adobe Premiere Pro version number: 24.4.1 (error happend also on the previous version)Operating system - MacOS Sonoma 14.4.1System Info: CPU, GPU, RAM, HD:Apple M1 Pro, 10 Cores (8 performance, 2 efficiency)RAM : 32GoHard Drive : SSD Samsung T7 2ToVideo format: .mov (panasonic gh5) and .mp4 (DJI drone) 59.94 and 23.976 fpsWorkflow details:Sequence settings : 29.97 fpsInterviews and VOs covered with BRoll (that need stabilization) Some parts are from a multicam sequence of 2 cameras (interviews).Steps to reproduce - (Very important!) Export as usual : File/Export/Media, select the settings then hit Export in Premiere or in Media Encoder (I tried different formats/codecs : .h264, .mov, ProPes422HQ, .mp4 and got always the same error)Expected result - Video exported normallyActual result - Failure in the export, abortion of the process, only a part of the video is in the file exported, until the bug happens I guess Tried both exporting with hardware encoding (only possible with Media Encoder) and software encoding. Tried to take off the wrap stabilizer effect but I still get the error and if not, the failure is at another shot stabilized. The shots that seem to be the problem are in 59,94 fps (not slowed down) and my sequence is 29.97 Dropframe (I have to deliver on that timecode). Would that be part of the problem when I apply the stabilization effects? I hope someone can help me 🙏 Thanks in advance.

ESSTLL3

Inspiring

Répondu

Export error 1609629695 (Warp Stabilizer effect)

Forum|Forum|1 year ago
May 27, 2024
5 commentaire
1586 vue

Hi, this is the error I constantly get since last week, I hope someone can help me with that!!

Issue - Export failure, wrap stabilizer effects seems to be the cause (see picture)
Adobe Premiere Pro version number: 24.4.1 (error happend also on the previous version)
Operating system - MacOS Sonoma 14.4.1
System Info: CPU, GPU, RAM, HD:
Apple M1 Pro, 10 Cores (8 performance, 2 efficiency)
RAM : 32Go
Hard Drive : SSD Samsung T7 2To
Video format: .mov (panasonic gh5) and .mp4 (DJI drone) 59.94 and 23.976 fps
Workflow details:
Sequence settings : 29.97 fps
Interviews and VOs covered with BRoll (that need stabilization) Some parts are from a multicam sequence of 2 cameras (interviews).
Steps to reproduce - (Very important!) Export as usual : File/Export/Media, select the settings then hit Export in Premiere or in Media Encoder (I tried different formats/codecs : .h264, .mov, ProPes422HQ, .mp4 and got always the same error)
Expected result - Video exported normally
Actual result - Failure in the export, abortion of the process, only a part of the video is in the file exported, until the bug happens I guess

Tried both exporting with hardware encoding (only possible with Media Encoder) and software encoding.

Tried to take off the wrap stabilizer effect but I still get the error and if not, the failure is at another shot stabilized.

The shots that seem to be the problem are in 59,94 fps (not slowed down) and my sequence is 29.97 Dropframe (I have to deliver on that timecode). Would that be part of the problem when I apply the stabilization effects?

I hope someone can help me 🙏 Thanks in advance.

Export

Meilleure réponse par ESSTLL3

@Kevin-Monahan Thanks for your answer. I finally succeeded exporting when I ran Premiere on Rosetta.

Also, I just tried your suggestion (back into Apple silicon version), I "rendered and replace" directly on the timeline and then exported, and it seemed to work as well! That is weird because I tried that method before and it wouldn't work at this point...

ESSTLL3Auteur

Inspiring

UPDATE : the solution provided by "James at AOS" in this post worked for me :

https://community.adobe.com/t5/premiere-pro-bugs/last-frame-of-warp-stabilizer-clip-is-black-gives-error-when-exporting/idc-p/14844439#M35273

ESSTLL3Auteur

Inspiring

UPDATE : Sometimes it still crash / put a blackframe on the last frame, even if the cuts are on "even numbers" as the solution mentionned earlier.... Feeling really tired about getting this bug with the stabilization effects.

Premiere version : 25.0.0

OS : MacOS Sonoma 14.7

Sequence : 29.97 DF

Files : mostly .mov files but also .mp4

No other effect other than a lumetri sometimes.

ESSTLL3AuteurRéponse

Inspiring

@Kevin-Monahan Thanks for your answer. I finally succeeded exporting when I ran Premiere on Rosetta.

Also, I just tried your suggestion (back into Apple silicon version), I "rendered and replace" directly on the timeline and then exported, and it seemed to work as well! That is weird because I tried that method before and it wouldn't work at this point...

ESSTLL3Auteur

Inspiring

@Kevin-Monahan
Update : Even on Rosetta I constantly get this error. Export crashes on Media Encoder (I use it almost all of the time because I need to keep working during the export. Even when I'm running both Premiere and Media encoder with Rosetta.

It is always 2 to 5 clips stabilized (all analysed before the export process) that make the export crash. I scroll the timeline to go to the timecode mentionned in the error message to find the problematic clip. The last frame is black. So I drag the next clip a little to the left to cover that last frame. I have to re-analyze those 2 clips for stabilization. Then I run the export again. It crashes and I get the error. I scroll the timeline to go to the timecode mentionned in the error message to find another problematic clip. The last frame is black. So I drag the next clip a little to the left to cover that last frame. I have to re-analyze those 2 clips for stabilization. Then I run the export again.

So much time wasted, my versions come late for deadlines... And by time, my edit is no longer on the beat 😅

The problematic clips are .MOV files shot in V-log (as all my other footage from the shooting). I have to say I'm working with V-log footage converted to Rec709 set in Lumetri's settings. That must be why some clips are kind of corrupted or are rushing with the warp stabilize effect. But why those particular clips? How to avoid it?

"Render & replace" dosen't work well for me in that case because it will either render the stabilization effect, or either zoom into my 4k clip to fit on my HD timeline with no possibility to zoom out because the "motion" section is grayed out.

How can I keep my log information (because I have to color correct the shots later) while stabilizing the shot as well? That may be the solution...

Update:

This happen when exporting with these settings : H.264, .mov/.mp4, interlace (upper field) 29.97 Dropframe (all my sequences are set in this framerate)

Seem to have no problem when exporting .MXF

Kevin-Monahan

Community Manager

Hi @ESSTLL3,

I appreciate the bug report and the info you provided.

It might be a corrupt clip. Can you try rendering and replacing the clips with a ProRes version of each one and then try exporting again? Alternatively, transcoding problematic clips to an editing codec like ProRes, stabilizing them, and then exporting them again.

Please try one of these troubleshooting steps and report back.

Please also let us know the duration of the sequence and whether many other GPU-accelerated effects (Lumetri Color, etc.) were added. I suspect you may have exhausted the system's graphics capabilities. I hope that we can work on helping you with a more reliable workflow with your existing system and media. Take Care.

Thanks,
Kevin

Kevin Monahan - Sr. Community and Engagement Strategist – Adobe Pro Video and Audio

ESSTLL3Auteur

Inspiring

I don't have this issue with other projects. I have about 150Go free on my external SSD.

I copied all my sequence into a new project and I still get the issue.

R