Questions

Hi, In the introduction to Aero the page states:"Location-based experiences allow you to anchor an AR experience to a specific GPS location." found referenced on this Adobe page:https://helpx.adobe.com/aero/how-to/augmented-reality-introduction-aero.html I would like to use Aero to create a walking tour experience of our property(7 acres). What I have read about Aero seems to indicate this should be possible.Where can I find tutorial/instruction on placing GPS specific events and connecting them as one big experience.Any input is greatly appreciated.

I'm developing a project and I would like to power some features with Adobe Aero or to be able to work the AR in Aero but to use straight my app as a visualizer. Is this possible?

Hi guys,I am a 2D and 3D illustrator just learned about Aero, and trying to learn it and start cerating content for it.My question is, is it possible to use Aero to create 2.5D comics like this one:  [weblink removed by moderator] If nt, do you know if there is an Adobe program better suited to do something like this?Any advice would be really appreciated. Thank you!

Hi, All of a sudden my aero file can't be opened anymore, and I get the message in the screenshot attached. What can I do to recover the file, knowing that I didn't move the file (it's on the cloud) nor changed anything between the moment where the file was correctly opening and the moment where it stopped? Thanks for helping out, I just lost a week's worth of work and am pretty upset. I could re create the file but if it is to get the same issue again I'd rather not trust Aero anymore.  

Hello, I am testing Adobe Aero Geospatial Creator, and I see that the added objects/assets are not displayed as fixed to the place where I place them, when I move while viewing the AR experience, it is as if they move with respect to the placed place. Would it have something to do with whether or not to check "Snap anchor to ground" or with some other configuration? Thank you very much for the help !!

Does Aero have any limits with regards to user visits or many people trying to load the project at the same time? 

The photographs I'm importing into Aero have a green outline (fringe) around them (not from a green screen).  Originally these images were AI generated photos that were exported as psd files.  I've made adjustments in Photoshop with selection masks to reduce the outline (fringe) and still it appears in Aero.  Thoughts?  I've been scouring the internet looking for answers.  Thank you!

How do I change the color of the starter assets in Aero?

Hi, I'm using Aero desktop and I have two Aero projects that I would like to combine into one. In other words, I would love to be able to copy my assets including all the behaviors from Aero file #1, into  Aero file #2, so that I don't have to redo all the work I did in file #1. Is this possible? Thanks!

hi how can i use adobe aero to track position of real life moving ball? For instance if the ball is by top of screen (or image) it plays a certain sound and at the bottom plays a different sound?

I just saw a job where from interactive buttons created in the AR experience in Adobe Aero Geospatial Creator, it is possible to control elements outside the software, in this case a set of DMX lights. Could someone comment on how this interface is made? Is it possible to access Adobe Aero points/ports to handle external elements? I leave the link of the commented work: https://devpost.com/software/geoluminescence#updates  

Hi Having just seen videos demostrating Geospatial function,this look amazing as would be a useful tool, as I work withinthe architectural field. When is this released, as not in my version 0.23.4or can I get a invite copy. Thanks Greg Gibbon - Foster and Partners

I am creating AR clip with my fine art oil painting.  I use a photo of my painting as the vertical surface and then make the objects moved.  How can I have the anchor set to kick off the clip when the person is actually pointing at the painting in real life to start the clip? 

Hello! I'm reaching out from Japan, and I'm very new to Adobe Aero.I'm reposting the same content for the second time as no responses on the previous post.Currently, I'm working with Adobe Aero Beta 0.23.4 (#127) and creating AR content using location anchors. I've come across a JSON file format called "ATImage Command Stream (*.json)" in the Adobe Aero "Import" function dialog.I'm curious to understand the nature of this JSON file format. Is it a standard JSON file, or does it have a specific structure? Despite my efforts to search online, I haven't been able to find detailed information about it. Even on the Adobe website (Adobe Aero's Supported file formats ), there doesn't seem to be any mention of this JSON format. Initially, I assumed it might be a GeoJSON file and attempted to import it.Here's my code:However, I encountered issues, such as the "RT3D import failed" (as in the following 1st picture) error and sometimes an unknown error (as in the following 2nd pictu

Will the discontinuation of Creative Cloud synced files affect Adobe Aero and its shared files?

I'm still on the Adobe Aero Win Desktop 0.23.4(127) version, how can I access the new version 0.24?I haven't received any email or link to update and the only email I have received is still the same as 4 months ago.

I used the sun from the built-in library of origami objects. When I set the SPIN action to it, it spins from the bottom, not from the centre. Kindly help. The settings are the same as in the tutorial video.  https://youtu.be/Fra8KEfVwWY?t=235

trying the beta, have imported a model(cube), exported via QR code, no model visible, tried the built in models in Aero, a sphere, share link via QR code, again object does not show up?? my location is Sweden, should work here to, yes? any hint on what to do to get it going are welcomephone is a google pixel 6a 

Hi,ok, so I did download the geolocation able aero, imported a simple cube, created a link with QR code tried it on the phone, no object there(cube). tried again with built in object from within Aero, sphere(gold?...) and new link/qr code, object still does not show up, any ideas what might have gone wrong here? my location is Sweden, should work here to, yes? phone is a pixel 6a,link: https://adobeaero.app.link/IBI7LDc9vFbCheers!k.

I understand that after an object is placed it's stuck in local position, in my case it's 8 stories above the ground. How do I initially place it at global 0,0,0? I don't want to slide it down to -12000 and guess if it's on the ground, and I'm not sure why it's being placed so high. CLearly in local space becuse when I set it manually to 0,0,0 it's still hovering 8 stories in the air The only way I know how to add is to press the + button. Every other 3d program places objects at 0,0,0 by default and it appears Aero only has a default and it's really high in the air. Curious if dragging it down to -12000 is the only solution for now?

Hello!I recently subscribed to the Adobe Aero Geospatial Creator pre-release and I'm still waiting for access. What is the usual amount of waiting time to get access?In the meantime, I have a couple of questions regarding the cost of use. I want to create a Geospatial Augmented Reality experience that hundreds of users will access simultaneously. I searched for a while but I unfortunately couldn't find any info on the cost per user/view amount limits of the experience. I saw some info from Google's side regarding the cost for the Geolocation API, but none for the development of the experience in Adobe Aero or the cost per view that the experience will have. Any info on this will be greatly appreciated.  

Is it by design that I can't find any way to export my Aero project asUSDZ? MAny Thanks

I can create an AR experience and generate the QR code and run it just fine, however, If something goes wrong between when I click the URL from the QR code at my desktop and when I am at the location (for a geospatial experience) then the only option is to walk back to the desktop computer and rescan. With the geospatial anchor, it will not let you "edit" (and I'm fine with that because I will likely never edit on my phone) but strangely it appears to have no method of running the experience again without triggering from the QR on the desktop. For example, If I scan the QR code, at an office in Manhattan, then take the elevator and walk 3 blocks, if I accidentally put my phone asleep I have to walk back and start all over -- I can't just run it from the phone because the app says I cannot edit a geospatial beta project -- even if I have no interest in editing it, I just want to trigger it again. I have a workaround by using an old phone to snap a photo of the QR code so I can resc

I'm trying to figure out how to get an fbx into Aero with the proper textures/shaders. If I look at any of the provided assets, they look fantastic (the robot for instance). But the objects I import have a very faded texture and weird lighting that completely overshadows the textures in animations. Here is an example:https://drive.google.com/file/d/1DcNItOowjeIkzMlhY3-WrFxVhFy4esV0/view?usp=sharingWould Stager or Substance help with this?

I'm trying to find a way to accuratly place objects exported from Revit Architecture into AR. It seems to do this I would need to be able to see my scan in the same environment as I'm placing objects in. For instance I just scanned my bathroom and now I want to add a vanity and a piece of art. This vanity needs to be in exactly the right spot. So I'd want to be able to see it and the bathroom scan at the same time and be able to create accurate dimensions. Is this possible? Another question, Does aero support using spacial anchors? Meaning that it uses the entire scanned bathroom mesh as the anchor? Or will I need to place an image target in the room somewhere?