P: Generative Remove Feedback (Lr Classic & Lr Eco)

[Rikk Flohr: Photography]

This post applies to Lightroom Classic and the Lightroom Ecosystem products.

Camera Raw feedback can be found here.

Generative Remove makes it easier to remove unwanted objects and distractions with a simple gesture, even on complex backgrounds. For more accurate results, be sure to include the object's shadow in your selection and/or expand its size. 

Detect Objects uses AI to find the objects underneath a brushed area. The masked areas will now appear larger than the Early Access version of this feature. You can also circle objects for quicker selection now. 

We have also updated the spot selection experience to make it easier to manage variations, switch the fill type, refine the selection area, or re-generate as needed. 

Batch updating is also now supported for Generative Remove spots. 

Try out the latest updates and share your feedback with us here. Please also include the following details in your post: 

• App version
• System details
• Example image(s) if you wish to share

Our team continually monitors this thread to track issues for future improvement. Thanks!

Lisa Ngo: Lightroom Product Manager

Posted by:

[Daniel336694186n1h]

This did not work.  I tried all these steps.  

Not only that, but when I use Generative AI and come back to the photo a minute later after working on another the photo, the edits have not been applied.  

I've constantly pressed the button to Update All on the photo and I've constantly highlighted all photos and scrolled the menu to "Update all"-- Doesn't work!

I've been regenerating every photo for days, but to no avail. I've lost so much time and days from work because of just trying to finish a gallery.  

I have no idea why this change.  I have no idea what I'm going to do for my client's galleries when all edits I've made are not applied  a few minutes later.  Every edit I've made is reset.  

[julia_wa]

Trying to remove a lens glare circle from a pefectly blue sky leaves a definite circle clearly visible - so not good in these circumstances

[johnrellis]

1. Try selecting a much larger circle around the lens glare.

2. If you applied Remove on top of an AI mask (e.g. Sky or Subject mask), do the menu command Settings > Update AI Settings to recompute the mask.

3. If this doesn't help, please attach a full-resolution JPEG exported from the unmodified original photo (not a screenshot). With nearly every one of the many dozen problem photos posted here, we've been able to show how to quickly remove the desired objects.

[rextranter]

I find since the update, that when I select 1 of 3 results for generatove AI remove - once I generate it changes the result and I cannot get it back.  It seems to have lost what was amazing.

[johnrellis]

@rextranter: "when I select 1 of 3 results for generative AI remove - once I generate it changes the result and I cannot get it back."

Can you provide more details of what you're seeing, preferably a short screen recording attached to your reply?

https://www.descript.com/blog/article/how-to-screen-record-on-windows
https://support.apple.com/guide/quicktime-player/record-your-screen-qtp97b08e666/mac

Generative AI Remove's variations are working in my LR the same as they always have, but I may not be understanding what you're seeing.

[talented_portfolio3578]

Hello,
I edited a RAW file at home in Lr and sent it to someone else to continue editing (no export to JPEG or TIFF, just the RAW file). When the other person opens the file in their Lr, all the edits are active and can be modified, but the edits made with AI only have a flat color, as if generative deletion only works for me… Can you help me with this?
Thanks!

[johnrellis]

If you did Metadata > Save Metadata To File on the raw before sending it, and then sent it and it's .xmp sidecar (if it's not DNG) to the other person, then they should be able to select the photo in Develop and do the menu command Settings > Update AI Settings. That will recompute all AI masks, including those for Remove.

A more reliable way of sharing raws is to select the photo and do File > Export As Catalog, selecting the options Export Selected Photos Only and Export Negative Files. Then zip up the exported catalog folder and send it along. That will include the previously computed AI masks.

[talented_portfolio3578]

Thank you for your reply, I did several tests and it turns out that we were using 2 different versions of Lr (Classic and Cloud), it seems to be buggy at this level... on the other hand when there are 2 Lr Classic it's perfect it works very well!

[jakob_schiestel_9164]

I suggest making the Generative AI removal tool e better at erasing text

[johnrellis]

@jakob_schiestel_9164: "making the Generative AI removal tool e better at erasing text"

Please attach a full-resolution JPEG exported from the unmodified original photo (not a screenshot) showing where Remove doesn't do a good job on the text -- that will show more clearly what the issue is.

[Ana_Guillemi4190]

Hello Rick, it´s been a while since an error appears when I use the generatuve remove, at first it works perfectly but when I ccontinue working and come back to the photo it says I have to update. I Update it, but the same error appears. I already updated lr to the latest version and give permission to access the disk. I dont know what else to do.

Im working with a Macbook pro.

Hope there´s a solution since  this is my work tool.

Thanks, Ana

[johnrellis]

@Ana_Guillemi4190: "when I ccontinue working and come back to the photo it says I have to update. I Update it, but the same error appears."

See the workaround here:

https://community.adobe.com/t5/lightroom-classic-discussions/p-generative-remove-feedback-lr-classic...

[Daniel336694186n1h]

This was my previous post with the same problem and it I followed the suggestions and it still doesn't work.  

[Daniel336694186n1h]

This is happening to me as well and it's been days!  I've tried all their suggestions.  No avail!  I've lost so much time over editing, then updating,   and updating and updating.  Everything just resets again!  

[ProfessorStone]

I would really like them to add a batch remove feature. For example I shot an event where multiple people walk up to a podium, take something, and leave. I cannot have a tripod, there's and EXIT sign in ugly bright green above every person. Because I'm handheld, I can't simply remove one, and then sync to apply to all, because the position of the sign moves slightly. Ai should be able to recognize the shape of basic objects like a giant EXIT sign, and "move"/reposition where the removal is happening within the image. It should recognize the object and adjust positioning for batch removal processing. Thanks!

[wierzchu]

When I'm using generative remove on area with some solid background or some of gradient, there is visible hard edge after remove which looks bad - maybe some option of feathering selection or let's add 10-15% of feather to make it look better?

[photogoofer]

Do us all a favor. When removing an item, it's typically in the center of our frame. The progress bar appears RIGHT OVER the object we're trying to remove.  I know it's movable, but can we keep it off the image?  It's only purpose at this point is to be in the way!  Also, it would speed things up considerably if you could make the "remove" button appear next to the last item selected for removal.

[bobd-seekeroflight]

Do any of you know what is going on with LR? Every time I apply a mask and/or use the clone tool, it needs to be updated when I go back to the photo.

So bizarre. I just went through a ton of photos from our wedding this past weekend and now when I export, all the masks/clone I applied are not on the exported image.

When I go back to see why, LR is saying I need to update each image. And this happens over and over… I’ve updated each clone and mask 5 times. I go back and they need to be updated again.

Any ideas?

[C.Cella]

@bobd-seekeroflight the issue you descrive match a bug that appeared in LrC 14.1 and was fixe after Adobe Max 2024.

Can you share a video recording of what you see?

So do:

Update Ai, 

Change Image

Back to previous imge

[Daniel336694186n1h]

@bobd-seekeroflight 

This is happening to me too.  Check out the recent posts I made.  I tried to follow their instructions but still problems.  

[kukalia_7888]

 My generative ai remove is not working fior some reason. It was working fine a couple days ago.

[johnrellis]

@kukalia_7888: "My generative ai remove is not working fior some reason"

To help, we'll need a lot more details about what you're doing and what you see (or don't see).  Full-resolution screenshots (not phone pics) can be very helpful.

[Daniel336694186n1h]

@kukalia_7888 

This is happening to me too!  Check my other posts.  I tried to fix it, but still issues.  Do you have a Macbook Pro Apple M2 Max?

[Bernard22916504bp0y]

nctionne pas avec des cables électriques dans un ciel uniforme. Rien ne se passe avec aucune variante.

[johnrellis]

@Bernard22916504bp0y: "does not work with power cables in a uniform sky."

1. Uncheck Detect Objects before brushing a selection -- it doesn't work well, especially with skinny objects and along the edges of photos.

2. After clicking Remove, check that the Opacity slider is 100 -- LR infrequently changes it to something else.

3. If you applied Remove on top of an AI mask (e.g. Sky or Subject mask), do the menu command Settings > Update AI Settings to recompute the mask.

4. See this short article for how to remove objects more reliably:
https://www.lightroomqueen.com/generative-remove-replace/

Most complaints about Remove are addressed in the article. But if it doesn't help, please attach a full-resolution JPEG exported from the unmodified original photo (not a screenshot). With nearly every one of the many dozen problem photos posted here, we've been able to show how to quickly remove the desired objects.  Power cables are no exception -- once you learn the tool, they nearly always remove easily.