Re: LRc suddently write like mad in CRLogs/dumps a...

Ian Lyons · ‎Jun 30, 2025

Do you have 'Automatically write changes into XMP' enabled? If so, try disabling same. You'll find it in the Catalog Settings Metatdata tab.

Ian Lyons · ‎Jun 28, 2025

Your screenshots indicate that you've applied or Edited the Remove tool after the masking tool. The recommended order is Remove before Masking. To fix the issue select the images displaying the artefacts, then choose 'Update AI Settings' from the Develop module Settings menu Cmd+Opt+U (Mac) Ctrl+Alt+U (Windows)

Ian Lyons · ‎Jun 28, 2025

I believe the question was genuine. Some users use the term 'export' when referring to 'Edit in Photoshop' or a third party application. Are you Mac or Windows? I use Mac and can batch exxport batched denoised files without issue. A copy of your System Info would also be helpful to us. This can be obtained via the LrC Help > System Info menu item. You can use the Copy button at top right corner of the System Info dialog to capture the info, then paste into your reply

Ian Lyons · ‎Jun 28, 2025

Have you tried resetting the LrC Preference file? If not, then follow the procedure set out in Method 1 at https://helpx.adobe.com/lightroom-classic/help/reset-preferences.html

Ian Lyons · ‎Jun 28, 2025

Have you tried resetting the LrC Preference file? If not, then follow the procedure set out in Method 1 at https://helpx.adobe.com/lightroom-classic/help/reset-preferences.html

Ian Lyons · ‎Jun 28, 2025

Please provide a copy of your System Info. This can be obtained from the LrC Help > System Info menu item. Use the Copy button at top right corner of the System Info dialog to capture the info, then paste it into a reply post. You should also describe which aspects of the application are slow, and whether this is new or not.

Ian Lyons · ‎Jun 27, 2025

Click on your account button (your Avatar) at top right corner, choose 'Edit Community Profile', then click on the Notifications tab. Attached screenshot may help You should also check which threads you're following. Disiable any that you want to stop following.

Ian Lyons · ‎Jun 26, 2025

@航太吉56239573 At top of thread, see the answer marked correct and other marked as Pinned Reply.

Ian Lyons · ‎Jun 26, 2025

Have you tried browse through a batch of images that haven't been denoised?

Ian Lyons · ‎Jun 26, 2025

You haven't mentioned what you were doing when the computer restarts. Providing same would help direct us to potential reasons for your issue. It would also be helpful if you provided a copy of your System Info. This can be obtained from the LrC Help > System Info menu item. Use the Copy button at top right corner of the dialog to capture the info, then paste into your reply.

Ian Lyons · ‎Jun 26, 2025

Catalog upgrades only occur when moving from say LrC 12 to 13 or 13 to 14. The upgrade doesn't happen with dot releases (e.g. 14.1, 14.2, 14.3, 14.4, etc)

Ian Lyons · ‎Jun 26, 2025

What happens when you delete Mask 2?

Ian Lyons · ‎Jun 23, 2025

@daerp Please share your System Info. This can be obtained using LrC Help > System Info menu item. Use the Copy button at top right corner of the dialog to capture the info, then paste into your next forum post It would also be helpful if you could provide details on the number of photos in your catalog along with the amount of spare space on the drive used for your catalog and photos.

Ian Lyons · ‎Jun 23, 2025

Simply stepping back through History will not clear the date, even if you use Optimise Catalog. To remove the data you need to use 'Clear History Above This Step'. I've attached a screenshot that shows how.

Ian Lyons · ‎Jun 23, 2025

@Carsten379080818tol You've opened a thread from 2018. It's best that you start a new thread. It would also be helpful if you would include a copy of your System Info. You can obtain this from the LrC Help > System Info menu item. Note that the Copy button at top right corner of the dialog should be used to capture the info, then paste same into yout new thread. I've locked this thread.

Ian Lyons · ‎Jun 21, 2025

Your System Info has a linee NVIDIA GeForce RTX 2060 (31.0.15.2849) NVIDIA GeForce RTX 2060 (31.0.15.2849) This version of the driver dates from April 2023. Best that your update to the most recent veersion. You should be able to download it from https://www.nvidia.com/en-us/drivers/

Ian Lyons · ‎Jun 21, 2025

Did you not see the answer top of thread that's marked as correct or the pinned reply just below it?

Ian Lyons · ‎Jun 20, 2025

Can you post a screenshot of the image to the forum? If yes, then use the button highlighted in attached to upload the screenshot.

Ian Lyons · ‎Jun 19, 2025

@Law_ren_ce The new recommended order for applying edits is that Denoise, Raw Details and Super Resolution are carried out first. All other edits should be carried out afterwards, and ideally as shown in below link: https://helpx.adobe.com/camera-raw/using/ai-edit-status.html

Ian Lyons · ‎Jun 18, 2025

I've provided a link below to Brian Matiash's Youtube channel. HIs videos focus on Lightroom Desktop and the mobile apps. Brian is also an Adobe Quality Engineer. https://www.youtube.com/@brianmatiash/videos

Ian Lyons · ‎Jun 18, 2025

@GeoffreyW I believe the replacement is still limited to 2048 by 2048 px.

Ian Lyons · ‎Jun 18, 2025

In addition to the steps set out by @Srishti Bali Please provide a copy of your 'System Info'. You can obtain same from the LrC Help > System Info menu item. Press the Copy button at the top right corner off the dialog that appears, then paste into your next forum post.

Ian Lyons · ‎Jun 18, 2025

The Denoise dialog in 14.3.1 and earlier is modal. This means that you could do nothing with the app until the dialog wass closed.

Ian Lyons · ‎Jun 18, 2025

@Srishti Bali The Copy Settings dialog is not resizable in any language. I've just checked the English language version and compared 14.4 with 14.3.1. While not as bad as the Polish language version, the 14.4 version is larger than in 14.3.1. Screenshot attached for reference..

Ian Lyons · ‎Jun 17, 2025

No, the list of options is as your screenshot displays.

Ian Lyons · ‎Jun 16, 2025

Select the images to be Denoised, enable Auto Sync, then click on the Denoise checkbox. You can use the slider below the Denoise checkbox to fine tune the amount of noise reduction applied to all or individual images in real time.

Ian Lyons · ‎Jun 16, 2025

Post a feature request in the 'Ideas' forum https://community.adobe.com/t5/lightroom-classic/ct-p/ct-lightroom-classic?page=1&sort=latest_replies&filter=all&lang=all&tabid=ideas

Ian Lyons · ‎Jun 16, 2025

That's because the embedded XMP is nearly 40MB. If you export the file using 'Lossy' Compression then the DNG will be much smaller.

Ian Lyons · ‎Jun 16, 2025

There is no resulting DNG. As of 14.4, that behaviour is gone. You can export the edited original file as a DNG, if that's what you want/need.

Ian Lyons · ‎Jun 16, 2025

LrC 14.4 no longer creates an Enhanced DNG file when Denoise, Raw Details or Super Resolution is used. These edits are now treated in the same as any other edit you apply to a photo (i.e. stored in the catalog and saved into an XMP sidecar file if you wish).

Ian Lyons

Ian Lyons

Activity

Re: LRc suddently write like mad in CRLogs/dumps a...

Re: Spot Removal Tool in Lightroom Classic – Used ...

Re: Photos with AI Denoise not batch exporting

Re: Light Room Classic getting "stuck" on importin...

Re: Frustrating: Import not working any more..

Re: Lightroom classic slow (5.16 GB) memory

Re: How do I stop notifications on a tread that I'...

Re: 複数の写真を一度にAIを使用してノイズ除去する方法

Re: Adobe Lightroom 14.4 Develop module slow down ...

Re: PC turns off then on again in LRC

Re: V. 14.4 Denoise doesn't work (error)

Re: Black block appears when using dehaze in masks

Re: The latest LR Classic updates is nearly unusab...

Re: Recover space in the .lrcat-data file

Betreff: Hochformate werden verzerrt angezeigt

Re: V. 14.4 Denoise doesn't work (error)

Re: Bulk Denoise

Re: New AI image distractions not working.

Re: P: How do I batch edit Denoise after the June ...

Re: Switching from Lightroom Classic to Lightroom

Re: Updated Remove Tool Resolution?

Re: Denoise taking 5 minutes - was 10-20 seconds

Re: Workflow Issue: Lightroom locks up during AI D...

Re: UI Bug in Lightroom Classic 14.4 (Polish Langu...

Re: Błąd

Re: Batch denoise

Betreff: Separation of original and enhanced DNG f...

Betreff: Separation of original and enhanced DNG f...

Betreff: Separation of original and enhanced DNG f...

Betreff: Separation of original and enhanced DNG f...