Downgrade to Premiere Pro 25.2 will fix it.   Many people has the same problem and Adobe is aware of it but has not released any fix yet, but downgrading from 25.3 to 25.2 seems to work. I would delete all media cahce files and the media cahce database when downgrading.   Can anyone help fix this without converting? By @audiovisual_4172   ... View more

Do you need to sharpen it or do you think you will need to sharpen the footage? My experience is that UHD footage downscaled to HD 50i looks very sharp without doing nothing at all, hence the question. Sharpening are known for introducing interlace artifacts.   As for question 2: I would work in a UHD timeline and export as 1080i50. I have done many tests and the differences are, IMHO, so very, very minor. Do some tests since you are the one that must decide what looks best for you. It also depends on your source footage, iow if you will use any 1080 or SD material in your edit. If anyone in the future want a UHD version it is very handy to have it ready rather than redo/fix/upscale much of the work.   As for question 3 i do recommend to do all cuts on even frames in a 50p timeline if you intend to export to 50i. If you do the cuts on even frames it will look good at 50i while you will see artifacts if you cut on uneven frames. Example of even frames is 00:00:15:14 while uneven is 00:00:15:13 or 00:00:15:15. Since 50 whole frames will be baked down to 25 interlaced frames this will make a difference. I could see the difference when i watched the material on a television set and i could definitely see it when i watched the material frame by frame on the computer.    If you dont do that you will have interlaced frames that have one field from clip A and one field from clip B at that cut point and they will be shown at the same time. Thats a bigger issue for me than sharpening...   I'm editing UHD 50p footage for broadcast delivery (1080i 50i XDCAM format). Based on performance issues and recommendations from the community, I'm working in either a UHD 50p timeline or HD 50p timeline rather than directly in a 50i timeline, then exporting to 50i (or call it 25i if you like) at the end.   By @Peter Reef ... View more

What happens if you just adjust the height or the width of that panel with the mouse to force a re-draw of the UI?   I had similar issues some versions ago and if i just adjusted any panel so the panel with issues got smaller or bigger the UI had to re-draw all panels and then the empty panel got back to normal again.   The easiest may be to adjust the height of the timeline, assuming that the timeline is placed under the Audio Mixer.   ...the Audio Track Mixer panel does not show correctly.   Any ideas? By @stephenj27301519     Same here. Bug with workspaces?  By @DJP2014   ... View more

The best way is to create a new project in 2025 and then import the old project file into the new project. Try that instead of just open the old project file. Can anyone help me with the issue I am having relating not being able to open 2010 premiere pro prproj files in the current 2025 version? By @Tamfleur   ... View more

You have checked the "Video is VR"-box in the export settings though the video is not, and thats why it happens. That setting is sticky, meaning that if you check it once it will stay until you un-check it.   Un-check it for the next export and see if that helps with the Vimeo issue.     I have the VR settings of my sequence set to "none"   Any ideas on how to keep my exports from defaulting to VR?    By @Kyle Kramb ... View more

Great! 🙂   Thanks for reporting back!   Fortunately, the problem is now resolved. Thank you again for your assistance. By @IReallyPlay   ... View more

If you have Media Encoder open you can just drag&drop your sequence/s from Premiere Pro´s Project panel to Media Encoder.   By doing this you will not get the previous export settings from Premiere Pro, but you will get the previous setting you used in Media Encoder. Better or worse? I would like to have a full bypass (in media encoder I don't want to have the PP export settings). How to do that ? By @pierret18811376   ... View more

Great to hear that it works and thank you for the report! 🙂   I'm late to post back here, but in the meantime, I've put a clean 24H2 onto my laptop, which I noted above, and now on my main machine about six weeks ago, and using the linke form @Averdahl's post (https://community.adobe.com/t5/premiere-pro-discussions/no-ac3-codec-in-windows-11-24h2-solution-is-needed/m-p/14974444#M537883) <- here or above, it worked fine on both machine with little drama. So, all's well, with thanks to @Averdahl 🙂 By @MyerPj ... View more

Ok, can you delete any files at all from the computer?   What kind of Windows account do you have, Administrator or?   It does not allow me to do that either. I get this pop-up:  Also, just for a side-note; The version I'm using is Premiere Pro 2025, not 2023. By @IReallyPlay   ... View more

If you get a similar error such as "This action can't be completed because the file is open in Adobe Premiere Pro 2023" i would try to import the file in a Premiere Pro project. When done, right click on the clip and choose Make Offline and in the dialog that pops up make sure to select Media files Are Deleted. Click OK and then click OK in the new dialog that pops up.   This will delete the file from your computer and hopefully it will work since this time it is Premiere Pro that deletes the file from your computer. This should hopefully override the error message you got earlier.   Test it and report back! 🙂     I'm having the same issue but the file I'm trying to delete is 30GB and it pisses me off.  I'm here to ask if you were able to delete the file you want?  By @IReallyPlay   ... View more

Just type in the word sequence in the search field in the project panel and all your sequences will be found. Double click on any of them to open them.  This is an easy way to find all your sequences in a project without knowing their names. A sequence is also known as a timeline. That´s where you put all your clips.   I don't know the name of my sequence. I don't even know what a sequence is. By @timf32887620   ... View more

It´s either DVD/BD-disc or burn in the subtitles in the video or upload it to Youtube/Vimeo if the goal is to make sure that all people can see the subtitles.   It seems that every TV has their specific specifications for media so it is not possible to have one file and one subtitle format that plays in all TV´s, as you have pointed out. That´s why the abowe is required.   I gave up "one-format-for-all-TV´s" many years ago when i discovered that a mp4-file can be used in one TV while another TV refused to playback the same file file since it demanded the mov-extension, etc, etc, etc, etc, etc.   Anyone have a favorite way to handle this? By @Stan Jones   ... View more

I’m glad it worked out in the end! Thanks for reporting back! 🙂 It took a while but it worked thanks to your solution. Now set up the pc completely as it was. Many thanks. By @Studio Brandaris   ... View more

This one will solve the issue: Download Dolby AC-3/AC-4 Installer - MajorGeeks   More info here: https://community.adobe.com/t5/premiere-pro-discussions/no-ac3-codec-in-windows-11-24h2-solution-is-...   ANY SUGGESTIONS PLEASE.   By @pawandeepsandhu   ... View more

Have you got any reply on the mail you sent? ... View more

I see the same here as well when i try. ... View more

Create a new project in Premiere Pro 2025 and import the old project file. Importing old project files into a new Premiere Pro version instead of just open them is better/best. Try it and report back. ... View more

Hmm, interesting...   Does it works if you only run Premiere Pro as an administrator? (iow, skipping the compability mode)   Ran Premiere in compatibility mode for Windows 7, while also running as administrator, importing through Media Browser gives me audio on the clips now... By @mitch_5787   ... View more

Bars and Tone as i wrote about abowe or re-importing the files or both? This also does not work unfortunately.. By @mitch_5787   ... View more

See my post abowe!   What happen if you create a brand new project and re-import the files? Since the files already have been imported as video-only-clips the audio wont show up if one add the audio codec.   Also original post is supposed to say there is no audio attached to the video file once imported. Computer plays back the files outside of premiere just fine, can't see how to edit post.. By @mitch_5787   ... View more

Ok, if you in Premiere Pro go to File > New > Bars and Tone and click OK and place it on the timeline, do you here the tone when you playback that clip? ... View more

It seems that you have Windows 11 24H2 installed and since that version comes without Dolby Digital it cannot playback your files that probably have been recoderded with Dolby Digital audio. That combination gives no audio.   The solution is to install Dolby AC-3/AC-4 Installer found here: Download Dolby AC-3/AC-4 Installer    Download the zip-file.  Un-pack  Install both files   Did it work? ... View more

Try to create a new project and then import the project you are working with into the new project.    Hello, its Friday, I have a project due on Monday and Adobe agents are unable to solve this issue, in fact have only made it worse. Has any competent humans out there encountered these errors and come up with a solution? By @MindTickle   ... View more