jonathand80819138  escribió it has extra black padding on the left and right. The sequence is not well configured: jonathand80819138  escribió What is the proper sequence settings / dimensions I should be editing this footage in? In the project panel where the clip is located, right click on the clip and select New clip sequence. With this you configure the correct resolution. If you want a more fluid edition, otherwise it will increase the processing during editing. jonathand80819138  escribió My final delivery will be in 1080p, In Export Settings, you select your preset 1080, and in the export monitor, Output> Source Scaling> Scale to Fill. ... View more

Hi Kevin. I think that when it only imports audio in 4K files or larger, with h264 nature, the above mentioned method solves them, especially when Premiere does not give any error. I am convinced that the importermpeg may have problems with the Intel controller, which motivates him to expose various faults, including not being able to import the video from an MP4. With the few files that I have been able to test, deactivating the Intel decoding solved the problem. In other cases you have to re-encapsulate to change the profile, as with the YI 4K camera. https://forums.adobe.com/thread/2529348 And in others, like the GH5, mov, you have to convert. , Sorry to extend myself in the answer, but this started out of necessity, to solve my possible problems, but it became hobby,  and it's something that I love to know. regards ... View more

Try this: Go to Edit> Preferences> Media and remove the checkbox before the item: enable Intel h.264 decoding (requires restart), o (12.1.2) Enable hardware accelerated decoding. close Premiere and proceed to delete the cache folders. Start Premiere and re-import the file. ... View more

Hi. tried removing the cache folders. FAQ: How to clean (delete or trash) media cache files? ... View more

There is an old belief that it is, to work continuously with different projects without having the precaution of cleaning when the project concludes it has less memory to the program, it was said that Premiere in the boot loads a lot of cache elements. Go to: Edit> Preferences> Media Cache  and press Delete Unused Comment if this solved your problem .. ... View more

KrassyDimitrov  escribió I watched a youtube guide on how to bring contrast and detail in wider dynamic range, the guy said to duplicate the clip, add tint to it, change the blending mode to soft light and bring the opacity down. Similar to how you would operate layers in PS. In Photoshop it will work that way, but in Premiere that procedure is obsolete, you have to learn to use the Lumetri panel, which is useful to have an advanced soft if one uses archaic methods. https://helpx.adobe.com/premiere-pro/using/color-workflows.html https://helpx.adobe.com/premiere-pro/how-to/lumetri-color-overview.html ... View more

billzhangzy  escribió It's been two weeks, we are still not able to use 12.1.2 for Yi 4K videos? Can Adobe give some updates if the new version would solve the issue. Thanks While you are waiting for Adobe to fix it, you can do the following: Download this utility, it is installable or portable: https://www.xmedia-recode.de/en/download.html Open the file In format select MP4 In video> Copy mode In audio> Copy mode Indicate exit route Add to Queue> Encode What it does is re-encapsulate the file by changing the JVT Format profile> Base Media ... View more

You lack the program monitor and probably also the origin, you must have windows 10, or I'm wrong ?. You will not fix it by installing and uninstalling the program. Press the windos + X key, device manager, screen adapters, and uninstall the graphics drivers, then reboot the PC, windows have to reinstall them, in case you do not, you do it manually, and tell us if you fix , or not. ... View more

For all those who said they have the problem with this thread, I recommend updating to the latest version of the program. The red screen or red frames is related to Intel, on PC or MAC. In the version of Premiere 12.1 the "Enable accelerated decoding of intel h.264" is not enabled by default, to do so you have to enter the console of the program. I have doubts with 12.1.1 since after an update, I make some adjustments, but it is possible that it is not enabled either. In version 12.1.2, if enabled by default. I think with this everyone with this problem already know what to do. ... View more

You could comment please, what OS you have and Premiere version. ... View more

I use version 2018.1.2 and I do not have that problem, I recommend you update Premiere. ... View more

I could put a screenshot of the entire program interface. ... View more

  escribió Anyone know if visually this turns out to be not as good as shooting at 120fps and keeping it that way? Personally I prefer to have the source material at 120 fps, this way I have all the frames in the timeline and I manipulate the slow motion better, without having problems in generating a project at any fps. ... View more

After installing the program, he made sure to have installed the latest graphics drivers. ... View more

If I get to that screen, it probably is not an installation error. Explain what you are doing because you do not understand. You are opening a project. It is importing Please tell us .. ... View more

Of course, I had the same problem, I said my solution when the keyboard shortcut does not work. ... View more

megacinn  escribió ... the term and option "hardware acceleration" first appeared in version 12.1.0 (april 2018). ..................................................... I got this information as well confirmed by adobe. Excuse me, but no, my exact comment was: The coding of the hardware is not a novelty of the cc 2018, since in the cc 2017.1.2 it has this characteristic. Tutorial Activar QSV Premiere CC2017 1 2 YouTube - YouTube Maybe Adobe did not want to reveal its secrets ... ... View more

southwestform  escribió I need to interpret the footage before dragging them into a new sequence? Exact, In the project panel, right-click, modify> Interpret footage set the fps of the sequence. ... View more

I do not know if this comment confuses or clarifies. The coding of the hardware is not a novelty of the cc 2018, since in the cc 2017.1.2 it has this characteristic. Hardware coding will be present if it has Intel support. The hardware encoding is only compatible with the progressive field order, and is not compatible with 2 PASS and High10. The hardware coding intervenes only for the creation of the final file and does not process the effects that have been applied. ... View more

Go: Edit> Keyboard shortcuts, in the search box type "loop", in the element, double click on Ctrl + L, you have to color, rewrite Ctrl + L, deselect and enter "Intro", ready. ... View more

If that is strange, it would be interesting to know why, if you find out the cause, it would be good to comment on it. ... View more

If after restarting the program did not work, leave it as it was. Probo using another codec, such as QT, cineform. ... View more

Instead of opening the project, use the option to import it, most of the failures when importing a previous project is due to the writing of metadata, the import is not written, it is only read. Or disable it in the preferences of the program, it says it works, until it happens to me I can not certify it. ... View more

Hi. Can you try the following? Thank you. Go to Edit> Preferences> Media and remove the checkbox before the item: enable Intel h.264 decoding (requires restart), o (12.1.2) Enable hardware accelerated decoding. then restart Premiere and try, and tell us. ... View more

Hi It is an error that has occurred in several versions of the program, and the cause is not known, or at least I do not know. However, I risk suggesting the following: Go to Edit> Preferences> Media and remove the checkbox before the item: enable Intel h.264 decoding (requires restart), or (12.1.2) Enable hardware accelerated decoding. then restart Premiere and try, and we see the result. ... View more