Adobe Media Encoder (Beta)

When exporting subtitles as an .srt sidecar file Premiere pro/mediaencoder gives the .srt the wrong filename. If the movie is called "filename.mp4" the srt file is named  "filename.mp4.srt" instead of  "filename.srt" 

Media Encoder na última atualização está com este bug.Renderiza uma lista de coisas que não existe 

Every video that I have rendered through Media encoder 2023 has been rendering off-centered. I dont know what I can do to fix this problem. I didnt have this problem when using 2022, but since this new version it has been giving problems. 

Because of enhance speech and a few processing effects (I assume) it's taking 10 minutes to export a 45 second video. I'm on a M1 Pro Macbook - this would normally take 15 seconds. But it's rendering audio files for 10 minutes each before finally exporting the video. Really awful.

Je ne peux pas exporter mes rush tournés en 4k en séquence HD, blocage au bout de 7 secondes de Média encodeur...

I've updated both After Effects Beta and Media Encoder but AME will not add my composition to the queue. The program opens up when I prompt it to render, but nothing appears in the queue. It was working fine yesterday.

I have a M2 13' Macbook Pro. When i run the audio enhancement on premiere pro my cpu load shows up in the high 10% to low 20%, but my cpu temps stay in the low to mid 70°C. When rendering said video with enhanced audio, using  Adobe Media Encoder (Beta), i got CPU loads of low 20%, but with concerningly high CPU temperatures of as much as 86°C!!!! please look into this as these high temps are very detrimental to the life of CPUs. if there is any information i could provide to help recreate the problem, please don’t hesitate to let me know!

 Can't Remove Job from Queue + Can't Type Values into Specs Steps to reproduce:    1. Have a job in the queue2. Right Click Result: ...All options are grayed outExpected: ... Options, including Remove, are visible. OTHER ISSUE:1.  Click Settings for a job that is queued2. Scroll down to edit video settings3. Click into a field to change a value (e.g. bitrate)4. Field does not accept typing(You can adjust value via sliders, but can't get a value precisely.) System info    Application: Adobe Media Encoder (Beta) v24.2.0.10    OS: Windows v10.0.22621, RAM: 63.83 GB GB, CPUs (logical): 16

ME Beta keeps crashing my whole system if I try to do any type of batch export or run something that takes rendering in premiere!

Using ME beta while trying to work in premiere beta continously crashes my system.  It's happened 5 times now.  I appreciate the enhanced audio but it sucks for work flow!

When rendering a video file in HD or 4K in AME the render stack on the last frame from 10-15 min up to couple of hours. I'm working on a new and powerful computer so no issues of hardware out of date. The problem is with all latest version of AME and I heard this problem from others as well.

Premiere crashed when adding several sequences at once for rendering.So I added them one by one, but the rendering failed.

Media Encoder Beta 24.1 (build 41),Premiere Pro Beta 21.1 (build 42)Win 11 Hm Ver 22H2 OS build 22621.2283Procr 12th Gen Intel Core i9-12900KF 3.19 GHz -RAM: 128 GBI can't render due to Renderer reporting missing media, that is not missing. When booting up Prem Pro, no missing media is indicated and can edit, play, etc. However, when exporting to ME or to render with Prem Pro the warning shows and, as stated the missing media graphic renders in place of flagged media.The workflow is a multi-camera sequence>timeline with sub of multi-camera sequence to render. I have closed and relaunched both PR and ME, plus rebooted the computer... still the same result. I'll try relinking the media next. All media is on networked SSD drives and have used this config on Beta and production versions of PR & ME with no issues up until today.Thanks,Dave Thiessen    

Media Encoder (Beta) zeigt an, dass Offline Medien erkannt wurden, obwohl alle Dateien vernüpft sind. Der direkte export über Premiere funktioniert Fehlerfrei.

Why can't I select these in the media browser, I can open them from the menu. seems strange!

Steps to reproduce:    1. ...I have about a 2 hour and 40 minute 4k video to render, and it takes about 14 hours, so doing this overnight is ideal.  I have been storing my files on a QNAP with a fast connection (including thunderbolt), but putting my temp files on a local drive. Result: ...Expected: ...I expect the job to finish, however I get a code 3 error.  It has taken a good moment, but I finally figured out that my ME job ended at the same time as my backup was scheduled on QNAP, at 5am.  Running the ME job during the day succeeded, which avoids the QNAP backup. System info    Application: Adobe Media Encoder (Beta) v24.1.0.38    OS: Windows v10.0.22621, RAM: 63.68 GB GB, CPUs (logical): 20

I assume this is an AME Beta issue, not PR Beta, but it could, of course, be either.   See bug posted in PR Beta: https://community.adobe.com/t5/premiere-pro-beta-bugs/enhanced-speech-not-exporting/idi-p/14122773   Note: when queue from PR Beta, I ge the "attached debugger" and may or may not open. I remembered that I need to open AME directly first, but I still get the error.   This test was done with AME Beta open before queued from PR.   I also tested with Import Natively NOT selected. This simply hangs up any export, and if queuing from PR Beta, it hangs with the "loading" message.   Steps to reproduce: 1 Apply Enhance Speech through Essential Sound Panel in PR Beta. 2 Exports directly from PR with the effects applied. 3 Queue to AME.  Result: Exports WITHOUT the effects.Expected: Exports with the effects. System info     PR Beta 24.1.0.41    Application: Adobe Media Encoder (Beta) v24.1.0.38    OS

Está dizendo que eu não tenho o codec HEV, pois é um codec pago. Estou usando uma conta paga.

Hi Community!I'm facing an error with the Media Encoder beta. When I opened the application, I immediately encountered the text Press OK after Attaching the Debugger (Image attached below).Then the application will automatically save a fileAdobe Media Encoder_2023-09-05_001256_THANHNGUYEN.crashAnd then automatically turns off,The same thing happens with After Effect, but then sometimes it works properly.

Media Encoder (beta v22.0 build 42) with Renderer: Mercury Playback Engine GPU Acceleration (Metal) freezes after start of encoding (H.264 Match Source - High bitrate), timing of freeze varies with every file attempted. MFR enabled. After Effects (beta v22 build 60) freezes at the same time. Issue began with AE beta v.22 build 56. Files to big to attach.iMac Pro Catalina 10.15.73 Ghz 10-Core Intel Xeon W64 GB 2666 MHz DDR4Radeon Pro Vega 64 16 GB

It's only a  27sec  4k clip from Adobe CH that NEVER gave me this issue a month ago.It just sits there pretending to work. Nothing in the Preview window. Just wait wait wait....NADA Running on a MacStudio OS Monterey 12.6.7 fully loaded

We will update our system requirements with the next major release of our video applications. This includes the 24.0 versions of After Effects, Audition, Character Animator, Media Encoder, and Premiere Pro.   This change goes into effect with today’s Beta build.   We update our system requirements each year, which allows Adobe Media Encoder to take full advantage of these platforms and helps ensure optimal performance for you.   Minimum OS Requirements To run Adobe Media Encoder Beta version 24.0, Mac users need to be on macOS Monterey (version 12) or later. Windows users need to be on Windows 10 (64-bit) v22H2 or Windows 11.We recommend running our applications on the latest operating systems:       macOS Ventura (version 13)        Windows 10 (64-bit) v22H2 or Windows 11 V22H2 Please note that support for macOS Big Sur (version 11) will be discontinued. It will not be possible to install the 2

Upgraded Media Encoder beta and all my presets are gone. Why does this stuff keep happening? Why can't Adobe make an update that doesn't wipe everything out?????

Image is pushed to the left of the frame. In Premiere, it's in the center. 23.5.9  

The function "increment output file name if file with same name exits" does not work