Adobe XD

Hello,I am looking for a way to share file specs (as color, font size, ligh height, font name, font cuts etc.) with a non-XD user developper. If I am exporting an svg of pdf file, paragraphs line are split and there is no way to know the line height (excep eyeballing). Also, it's not quite convenient to know other font specs.Is there a way to export a file, with these type of info?  Thanks a lot.

I had installed Adobe XD from the adobe website, and connect it to adobe cloud. but now I can't connect to adobe cloud so I can't create a new adobe xd project, like this. although I already restart my laptop and the creative cloud service

I'm handing off assets to my developers and have noticed that all of my images are being exported at much higher weights than they were when I dropped them into the designs.  An example:  Uploaded this image into a rectangle (mask) within the design.  File is 113 KB.https://angelmerzdigital.tinytake.com/tt/NDUwMDUzNl8xNDI1NDM4OQ2.  When exporting I receive this file and it is cropped which should cut off maybe even 2/3 of the original file size.  Instead the new filesize is 415KB.  That's almost 4x the original size?? Here are the file properties side by side.  You'll notice the width has bumped up by about 100px but the height has been cut down by 2,000!https://angelmerzdigital.tinytake.com/tt/NDUwMDU0NF8xNDI1NDM5Nw Do I really have to go in and optimize every single image again?? Also, just a side note, I originally optimized because I noticed that my prototype was extremely slow.  I went through the painstaking task of

There is an issue with recording a video from the prototype - when I click the record button - it indicates that the record is on (it blinks) but the time is still on 00:00. When stopping the record there is no prompt to save a video (the button stops blinking).XD version 31.1.12.13, CC 4.3.51.3on Mac

This prompt prevents me from installing 。How to deal with it? THX     hongryho 5 seconds ago Exit Code: 505 -------------------------------------- Summary -------------------------------------- - 2 fatal error(s), 3 error(s), 0 warnings(s) FATAL: Error (Code = 505) executing in command 'AddUWPAppxCommand' for package: 'UWPAssets', version:19.1.22.6 FATAL: Error occurred in install of package (Name: UWPAssets Version: 19.1.22.6). Error code: '505' ERROR: Privilege lowering failed PU_CreateProcessWithTokenW! Error: 1058 ERROR: Failed to launch hdhelper exe at C:\Program Files (x86)\Common Files\Adobe\Adobe Desktop Common\HDBox\HDHelper.exe for install UWP with error code 1058 ERROR: Failed to install UWP Appx Package with error failed to launch hdhelper.exe (delevated) for installing UWP appx with error code 1058 ------     {Renamed By MOD}

I have a component that has 2 states:Default state: A Group containing a rectangle with text, and another rectangle + text within (which is itself a component with a hover state). At Default State, opacity is set to 0%Second State: Same thing, but the opacity is set to 100% In prototyping, when the second state is triggered, the hover state on the component within the first component no longer works. When default state's opacity is set to 100%, it works fine in both states. The same thing happens when "Hide" is used in the Layers panel, rather than opacity. In troubleshooting, when the opacity is set to 1% or higher, the hover works again I have attached two videos showing this bug - in one marked 0% opacity, you can see that the hover button does not work. In the other, opacity is set to 22%, and the hover button then works in both states. No other changes were made. (this is troubleshooting so placement is not relevant)

Hi, I'm sharing the project with my team by using this link so they can make comments on it.  At the moment when I use the preview it works just fine:  But when I update the shared link the content looks like this in some screens in the browser:This is anoying since I can't find were is the problem because I found everything is ok inside the editor. Any clue? We really need to find a solution fast. 

My trigger, Action is not showing

Hello, I have a problem downloading plug-ins to Adobe XD. I can't download any plugins for this program, and after each attempt an error window without number pops up. On the adobe site I have not found instructions to solve this problem, maybe someone has already faced such a problem.

After the latest update stacks no longer function properly in a preview mode or in shared preview links. It only functions correctly in prototype mode when I click on the component state. But if I use an interaction to trigger the component state the stacks do not work. Please see the attached video

Hi,Is there any option in XD to add bullet points or numbered list (just like word capabilities)? Or any external plug-in to support?Thanks!

Hi, I'm trying to create an image carousel on my homepage in XD. I have no problem creating a Drag trigger between my first 2 images, but then can't select Drag as an option between images 2 and 3. It only presents Tap as an option. Can anyone help?Thanks Jeff

Hello there ,Can someone tell me how to delete the selected file in adobe XD I dont want to clear all the recents , i Only need to delete one or two selected files .Thanks in Advance .

Short version: If you set a button (component) in a Master Doc to have horizontally padding. Is it possible to overwrite this on individual instances of the component? If not, I guess I'll just need to have a button (component) without any horizontal padding and just change the width manually on each instance to get the desired affect. I know I could have one component with 30px horizontal padding, another with 60px and another without padding which can be scaled to 100% but this seems a bit OTT and difficult to manage for x3 very similar buttons? As an aside to the above, is it possible to to change how the button component is aligned (left/centred/right) when resized/padding is changed? I noticed when I changed a button's padding it jumped to the right of the prototype when I thought it would align to the left edge when the size changed? Finally, if you change the width of a component and it has various states. You need to update the width on every single state - is th

Hola a todos cuando quiere instalar un pluggin  se queda "pensando" al darle click en "instalat" al pluggin que quiero y no hace nadaalguna sugerencia??? de que puedo hacer1- ya reinicie.2-ya reinicie la add cloudy nada... Desde ya muchas gracias.

I'm not collaborating with any others and have no need to put files to a cloud server. Having no option for local files, being forced to up docs to a cloud server, is very off putting. I want an option to use local files.

Hello everybody , I have microsoft windows PC , and i downloaded iphone kits but i cant use it , can someone help me in order to design on them ?   {Renamed By MOD}

Hello, first of all I want to thank Adobe team to create such magnificent tool free for using. However, there are some minor bugs here and there that'd be awesome that you guys can help me fix them:I'm working on a project that involves a huge amount of artboards (roughly 250+) and I've experience some of my prototype links missing randomly as if I had deleted them.As you can see, the artboard aboved was copied from the one below. And after I closed the file and re-open it again the next day, the links disappered. I can relink or copy them again but it's a waste of time and I'm running a short time here. Is there anyway to prevent this or any step I could take to avoid problems like so to happen again in the future? I've ran into the same problems with earlier versions I used in the past, as well as the latest update of Adobe XD.

Hi there, can somebody please explain where the background is in the layer segment? trying to enable a scroll group in a certain section for a website prototype with a grey background and either the background layer is above the scroll group, which makes scrolling not work or the layer is beneath the scroll group and the scroll goup cannot be seen. Also it only works wit th the first item of the scrolluing group - can somebody help?

Hi all, I am trying to simulate an action where you can click over a button, the button is highlighted (I created a hover state to do this), and from the hover state, you can click on the button and it transitions to another artboard. For some reason, if I create an interaction from the hover state, the artboard transitions from the previous board directly into hover state. However, I want the artboard to start in default state, transition to hover state, then click on the button to move to the next board. Is this possible in XD? Thank you all in advance!

When I created the prototype link on XD, It had all the components when opened on a PC. But When accessed through a phone, I found some of the components to be missing or not visible. Basically, The prototype link works fine on a PC but somehow doesn't work right on a Phone. Help would be appreciated!

Following up on this post https://adobexd.uservoice.com/forums/353007-adobe-xd-feature-requests/suggestions/36142855-measure-while-moving , i still can't figure how to nudge while measuring the distance between 2 objects on windows 10, on mac it works perfect but on windows 10 is a mess. Anyone can help?

On all other Abode software, when I select uppercase on my greek text the accents/tones are removed however in XD they remain. This means I have to go through the whole document removing the accents/tones one at a time which wastes a lot of time. It would be a great feature if the uppercase tool removed the accents/tones in Abobe XD.  

Hi,is it possibly to apply multiple touch interaction to the same object?Example: I have a master switch set to off, by clicking it i change to on a series of related elements (that can be already clicked standalone). In case there's a script or a plugin that allow me to do that?

Hi, I've updated XD to the latest version and I want to export my file to Zeplin but it shows this error? I've tried many ways to rectified and even reduce the artboard size down to 1920 x 1080, but still showing the same error.  I have tried reduced the layers and converted all the vectors into png. nothing works. Sorry with my English and Grammer.  I'm using Windows 10 Pro,Version 2004XD version:31.1.12.13 Zeplin:4.1.0 (Free Version)