Audition

I'm trying to make a simple edit to the attached mp3 file by trimming the silence at the beginning, but the file isn't saving. I'm hitting save and the asterisk disappears as if it were saved, but if I close the file and open it again, the space is there again. I've tried "save as" but that doesn't work either.

Hey everyone,I've been paying for an Adobe subscription but have been doing all my VO in Audacity -- figured I'd try Audition since I have it.  Unfortunately, Audition isn't allowing me to record anything. Every other application that I use works perfectly fine with my setup but Audition -- not so much. Maybe you guys have some ideas?Windows SetupRunning VoiceMeeter PotatoShure MV7 is on my VoiceMeeter Output (VB-Audio VoiceMeeter VAIO3)Windows Sound has VoiceMeeter Output set to Defaut Recording Device; detects signal from mic.AudacityRecording Device is set to VoiceMeeter OutputCan successfully record audio.DiscordInput Device is set to VoiceMeeter OutputPeople can hear me.TeamsInput Device is set to VoiceMeeter OutputPeople can hear me.Adobe AdutionEdit > Preferences > Audio Hardware...Device Class: MMEDefault Input: VoiceMeeter OutputDefault Output: My HeadphonesClock: VoiceMeeter OutputEdit > Preferences > Audio Channel Mapping...Default Stereo Input 1/2: VoiceMee

Hello everyone,I am recording audio in Audition and would like to use Voicemod - Voice Changer to record some voices of a song (using vocoder and auto tune).How can I connect this program to the Audition audio input? Is it possible?Please help me. Thank you.

I just received an error message, "Invalid Image File. HRESULT:_2003292336 PLEASE HELP!! Lou

Hi, I see lots and lots of "how to improve your voice" tutorials and stuff like that on YT. No one talks about real life usecases where i need to edit the Video and modify sound at the same time. I thought the whole purpose of audtion is that its dyamic linked like i can do with PP <-> AE. Dealing with Sound in PP is kinda aweful when it gets complex. So i would like to do most stuff in Audition. Exporting kinda works but how to do  some changes in PP then which gets reflected in Audition later on again ? My Preview of the video in Audtion is showing me an old version of the Video. How can i refresh it reflecting latest version ?  regards,   

I want to control the playback speedAlthough I saw that it was already asked before, but for me [version 3.0] I could not activate this feature.I saw that it was mentioned that it is possible by JKL, but it is not clear to me how these keys are used? with control? If so then it doesn't work for me for some reason.I'll emphasize, I'm only interested in controlling the rate of a preview, like on YouTube, and not changing the rate of a file.I would love to get help.

I'm considering buying Audition; can EQ enhancements be made to an external/pre-existing MP3 file? TIA

I was looking for a way to convert a female voice to a male voice. Most tutorials or voice changers I've found just lower the pitch, but that does not at all help. Is there a way to edit the way things are pronounced (not entirely sure the technical terms, but the way they speak) to make the voice more masculine? This is literally the only feature I wanted out of this app but unfortunately it seems it isn't possible, but if anyone can help (or reccomend an app that does) please do.

This is a recording live from 1971 and I want to clean it up but do not know how to even the track so from the middle to the top and from the middle to the bottom are equal any ideas?

Need to retuen the echo to its default setting

I am creating my Podcast on Audition. My mics are connected to my Behringer XR 12 mixer. If I connect my USB ouptput to my computer, will Audition see it in the Audio Hardware input in the Podcast template? Thank you. 

I am new to using Audition and am editing a podcast with two audio files that I imported. I tried to export the final file but it had no audio, and then when I went back to the program, all of my cuts and editing are visible, but the files itself are blank. I'm so scared to have lost all the work and am trying to figure out how to re-link the original audio files since the edits are visibly still there. It also says the audio is offline, and audition is no longer showing the multiple tracks I'd had. It's only showing one track. Image attached for reference. I also am having a hard time with figuring out the proper procress for exporting if anyone has advice on that. 

Hi,I have the Adobe Audition 2.0 and just re-installed on my new computer (PC). But I am not able to activate it as the phone activation has also been discontinued.Please help!Thanks,Rupa

I am working thrugh the Audition CC lesson book, and I have downloaded audio files that go with the lessons. In the hardware setup directions the book says to connect my audio source, in this case an Ipad, into my audio input jack on my computer, and my speaker source into my output jack. But my Windows laptop only has one 3.5 mm jack for a headset with a mic attached. So how would I set up my audio output? In the Audition hardware setup page it shows the input hardware as two channel, and for the output page there is no 24 bit option - just 16 bit. I do have the 44100 Hz option ofr both. Thank you.

Hi, I have a question, I had to reinstall audition, but I don't know how to put it back on a function that I had before, when I moved a clip to align it, a dotted blue vertical ruler appeared along all the tracks and it disappear when I release mouse button, this helped me a lot to align without snap, but I can't find how to activate it again.

does anyone know how to get back to continuous play while highlighting and deleting in a audiofile without it skipping to the highlighted section?

I cant export my audio file and there is a message further - An error was encountered . "Unable to write data to the temporary file system." What am I going to do?  

Hello, in 23.3 when I press M or F8 in a wav file it puts the marker and then is automaticly zooms out. Anyone else having this problem?

Hi,I have a problem getting the Text to Speech functionality to work. I have added new languages to Windows 11 and chose James (Australia) as Default Voice in Settings/Time & Language /Speech. I have also tried to add ones via Windows Narrator. Even though they seem to work in Windows, eg in the Narrotir, they will not show up in Effects / Generate / Speech and only the basic US/UK voices are available. What is going wrong, and how to fix it? Thanks in advance for the help, magnus  

I don't know why this is happening, but I'm trying to remove all parts of a clip except for the talking using the diagnostic panel and the "remove silence" option. I kept moving my thresholds down to have Audition stop trying to tell me talking was silence, I had it at -57 db, above would be audio at 25ms, and below at 200ms would be silence. I don't know if these parameters are messing with it, but even audio that is -30 to -20 for multiple seconds is still considered silence. This seems like a major issue for what is an extreme time-saving feature. I just updated to the newest version last night and I am still having the same issues. I am also using a .wav file if that changes anything.

Hey everybody,so has of recently my Adobe Audtion is not working. At first I thought maybe it was the app or my laptop, but to make the story short, it turns out that its my sample rate of my mic and my laptop speakers not being the same rate.  Alrighty, so I looked up everything that i can do to fix this and at the same time researching if it could be some other problem but I'm 100% sure it's the sample rate. Last time i used it was like 3 months ago and it worked find and I've had used it ever since and even then it would work find. My mic, it's a hyper x mic btw, not sure if that changes anything. Anyway, I've tried changing it but my speaker is all grayed stuck at 24 bit, 48000hz, while for my recording I can change it but it can only go up to 2 channel, 16 bit, 48000hz. Ive tried everything and this is my last resort so if i can get any type of help with this, I would really appreciate it! Here are the screenshots:

I have two fairly good condenser mics that I would like to use for a two-mic set-up for Audition. I am using Windows 10. I know I need some kind of interface. Obviously I will need phantom power for both plus two headset inputs. Should I use a mixer or a simple interface like the Scarlett? My price range is between 200.00 and 400.00. Any help would be appreciated.