Bug Reports

Returned to work from vacation to find Audition had updated itself while I was away. New version is 26.0.0.56 Build. When I try to open sessions I produced in Audition 25.3.0.71, Audition comes up with the Can’t find all Media pop-up and wants me to link to the Media. When I try to link media (even if I manually try to link the media by right-clicking on the clip and selecting Link Media, it doesn’t work. I cannot seem to open old sessions with the new 2026 version. In my workplace, (radio station) I have to save all sessions to a OneDrive, accessible to all producers across the country, so anyone can work on anything. I have not tried to open an old session from my local HDD. (yet) I have reverted back to Audition 2025 so I can complete my work. Audition 2025 still opens everything normally… even from the Company OneDrive. 

In Audition 26 (and for some unknown amount of time), clip markers are not functioning as expected, and the menu commands provides incorrect guidance.Here’s a video explaining and demonstrating the issues: https://screen.studio/share/Fy5mcjfb 

I will got to the waveform editor, select the section I need to edit, and apply the RX Connect Repair plugin.  I edit my clip, send back through iZotope RX, then click apply for the changes to set.  After the changes are applied, Audition will stop recognizing my audio interface.  I will have to close Audition, unplug my device, plug it back in, and restart Audition.  I will usually have to reset it in the device manager as well.  Starting happening after a Windows 11 update.

26.0.0.56Every time I open *.aac files, it cuts off part of the track at the end. Sometimes it's a few seconds, sometimes several dozen seconds.

In multitrack editing, if you use audio track stretching, the wave is displayed incorrectly when scaling.In my work, I need maximum precision down to the beat, but due to a display bug, I cannot achieve this, since at one scale the wave is in one place, and if you change the scale a little, the wave is already in a different place.This bug was not in version 2023, but appeared starting from 2024Windows 112023 23.6.1.32024 24.4.1.3 

Audition completely unusable. It launches, displays the Learn Panel, and then freezes within 5–10 seconds. The UI becomes unresponsive: Menu items turn gray, the Learn Panel shows a blue highlight border, and the application stops, freezes my entire system & requires a hard reboot. This happens with every single launch, even after “clean” reinstalls and resets!I have fully uninstalled Audition, Creative Cloud, and all other Adobe apps. I have manually deleted all Adobe folders in Program Files, Program Files (x86), AppData, (Local and Roaming) removed leftover CEP, CEF, and WebView2 components, and reinstalled cleanly.Additionally, I have deleted all workspace files (except a custom “NoLearn” workspace created to attempt launching without the Learn Panel,) and edited AuditionPrefs.xml to disable it and set NoLearn as the default. I have deleted recovery files after each crash, and even attempted Shift‑launch to bypass previous sessions.Further, I have renamed Learn Panel extension

Hi, yes Audition 26 makes wat should be an easy peasy job into a nightmare. It looks like a beta version, not ready to be released yet. It is messing up my files, my work too and deeply regret to have uninstalled Au24 and Au 25. The last sweet event was yesterday. Using AU 26, I opened a file I recorded using a Zoom handheld recorder and began to edit it, then suddenly,  Au26 froze, it was ciclying doing something for a long time, closed by itself and when I opened the file again to work on it,  Audition 26 had done 4 things:1. it mixed up that file with another one I had on the same SD card, inserting it in the middle of my working file.2. It deleted the last 5-7 minutes of the original audio file AND3. It created another one with few seconds of the original one, with a greeting, repeating it in a loop for 29 minutes. 4. There was no back up savedNow, the initial file has to be on air tomorrow and I am on leave but working, using file recovery applications trying to find any copy on t

I’m regularly getting an issue where there are errors on processing or saving in the latest version of Adobe Audition which corrupts the audio file itself, leading it to only showing silence.For example, I had 20 short audio files I just ran a volume normalisation process on, I got an error during the process, saved the files, then reopened them to discover all were now silent. This is REALLY bad. It’s one thing for bugs to happen, but when they actually destroy the audio file being worked on at the same time, that is seriously bad news. I am very fortunate that my pipeline has constant backups at every stage of the process.

I have recorded 12 & 45 minute voice overs files for a documentary. I also recorded a test today. It was fine for a few minutes, then I got the same error message I have attached. It appears the waveform is there, but there is no sound. I pulled the file up in another DAW, WAV or MP3, and the audio is gone. In another DAW thee waveform has vanished. The wave in flat. It played back just fine last night when I saved and closed out. 

Hi everyone,I'm experiencing a frustrating issue in Adobe Audition when listening back to my recorded audio file. After exporting to file to see if that fixes, I noticed that the exported files have no sound, even though the file size suggests there's audio data present ( see screen shot)Here’s what I’ve tried so far:✅ Checked Master (mix) Channel & Track Outputs – No change✅ Verified Export Settings – Everything seems fine (format, sample rate, bit depth).✅ Tried Different Formats – WAV, MP3, FLAC—same muted result.✅ Restarted Audition & Reimported – No change.✅ Checked Audio Hardware Settings – My system plays other audio files normally.✅ Bypassed Effects & Plugins – No accidental gating or muting applied.✅ Reset Preferences – No luck after resetting Audition.At this point, I’m stuck! Has anyone encountered this issue before, or does anyone have additional suggestions?I'm now cocnerned that the file has corrupted somehow.&nbs

Over the last few months, when I’m playing through a track, the playback head visually progresses from smooth scrolling to more and more choppy.  It’s starts out fine, then after 3-4 screens-worth of scrolling on the timeline, in my case maybe 20 sec, it slowly gets more and more choppy or laggy.  It’ll look like it’s slightly starting to lag, and progress to the point it looks like it’s jumping 0.5-1 sec increments.  If I switch from multitrack to waveform view then back. It’ll reset to a smooth scroll, then start the process over again.  The same issue occurs in the waveform view.  If I have several tracks in a project, it will immediately start with a choppy scroll, even if all tracks are pre-rendered.  I run Windows 11, have 32GB RAM, and a 14th gen i7 processor 2.8gHz. Audition doesn’t seem to being using an inordinate amount of CPU or memory.   Not sure if there was a windows update that doesn’t jive with the newer versions of Audition?  I used to run v.2022, issues started after

On regularly base some (Waves) VST (3) Plug In’s don’t open in Edit (Waveform) or Multitrack mode.When opening Audition fresh start, plug in’s can be used and ALL work perfect. Plugin settings popup window shows up and can be adjusted.After a while working and editing some of them stop working and can’t be opened anymore.For example: After a while working, when ‘Metaflanger’ is selected in waveform-mode via menu ‘Effects/VST 3/Modulation/Waves/Metaflanger Stereo’ or in Multitrack mode in the Effects Rack, nothing happens, the plugin does not run anymore.The plugin’s are installed properly because they initially work (when Audition is started fresh), but some of them (for example ‘MetaFlanger Stereo’, ‘Metafilter Mono’, ‘Metafilter Stereo’, ‘Metafilter Mono’, ‘OVox Stereo’, ‘OVox Stereo/Mono’) stop working/are no longer usable when using Audition for a longer time. The plugin settings popup window doesn’t appear anymore.Other Wave Plugin’s have no problem and still are usable (For examp

I just started using Adobe Audition after years of Audacity and FL. It's got some powerful features I like but there is a design choice that I just can not wrap my head around and I think it's gonna make me quit this program if I don't find a solution: Why can't I undo edits made in the effects applied to clips or tracks? For example, when I tinker with the EQ or FFT and I end up not liking the edits - there's no way to undo them, Audition does not register those steps as undoable and it starts undoing other stuff while leaving the changes I made as they are. So I have to manually recreate the effect parameters as they were before the changes.  I find this program behavior is stifling my creativity and my naturally experimental approach to editing audio, as I have to very carefully plan around the fact that whatever I do can't be undone. Yes I can duplicate the effect and turn it off while I experiment on the copy, but it's all very cumbersome and doesn't allow for insta

This is not reporting an issue in Audition (I don't think), this seems to be an issue with two VST3 plugins:TBTECH - Kirchhoff-EQFiedler Audio - SplatThese are the only two plugins I've found that have this issue.If either effect are opened such that they are first drawn to an extended desktop monitor, it crashes Audition, everytime.So, anytime I need to open either of them, I must first unplug my external monitor to ensure they are drawn to the primary display.  I can then plugin external monitor and then I can move either plugin onto that extended desktop without issue. I'm posting this, not because I'm trying to find a solution but to provide this workaround for others who run into this issue.

Adding a marker to audition is super easy - just click m and there it is, yay.  However, they don’t stay where you put them.  So, they are useless.I’ve added markers to a track (single waveform, not multitrack view), saved the file and come back to it later.  Sometimes the markers are just not where I put them.  Other times they move if I do an edit.  Any kind of inserting a recording will move all the markers (or rather, keep the marker where it was while shifting the rest of the waveform along with the new insterted recording).  Sometimes pasting audio into the track will mess things up.  Other times it just seems to happen anyway.Any ideas how to make markers an actual functioning feature rather than a waste of time?(I’ve shared this in a group with audio narrators and many of them report the same issue, some suggesting editing from the end of the track backwards as this might be a workaround.  I’d prefer to have it just work properly if possible.  Tech support suggested it was due

I’m having issues with Audition.  I was able to use it for 10 minutes today, but then it froze.  When I tried to restart it, it will still be frozen.  I can’t even send any bug or error reports.  I tried using previous versions of Audition and they too weren’t working.  I spent like 1 or 2 hours trying to get this software to work.  I tried updating all the versions of Audition and they still freeze.  I posted a video here of what I’m experiencing so you get an idea.

new issue with Audition. If i highlight the whole waveform and delete it, the content is cleared and the scroll bar along the top is emptied, but the main editor window still hase the waveform image in view.   If I hit record this screen then clears and the recording continues, so the content has been deleted, but for some reason this ghost of the waveform remains in the viewing window until I hit record again.  This was never an issue before latest update.      

Audition 26.0.0.56 does not work properly with Huion Keydial Mini on Mac OS 15 – buttons execute different functions than assigned (it works fine on Audition 2025 though)

Every time I double click a track on the multitrack view to edit it in the waveform view, and then try to record, the input level halves or is reduced even more. If I go back out and then go back in to record again, the input level gets even smaller. This bug is HUGE and is ruining my workflow.

v.26 hangs on opening until force quit. 

This is actually not a bug report, but rather a feature request.  For some reason it won’t let me put in a feature request.  Here is the feature request that I’m asking for:It’s very common for me to work with multiple tracks that contain similar audio clips, often created through copy-and-paste. Sometimes this results in unintended duplicate clips stacked directly on top of each other.Because these overlapping clips aren’t always obvious visually, I’ve occasionally played back audio without realizing that multiple clips were sounding at once. This can lead to messy or confusing playback and makes troubleshooting more difficult.I propose a feature that either prevents audio clips from being placed directly on top of one another or provides a clear visual warning (such as an icon, highlight, or alert) when overlapping clips occupy the same time range on the same track.

I am trying to make perfect ogg file loops for games using Adobe Audition, and for the longest time, this was never an issue with the app as it would create perfect loops each time for Unity.   However, the latest version gives the ogg a very brief 'pause' at the end of the loop. When I bring the loop to a different program, such as Reaper, I can see that Adobe Audition's export has left a teensy tiny bit of silence in every ogg file I export, and now in order to do my loop exports, I have to do my sound work in Adobe Audition, bring it to Reaper and then export it as a proper loop.  It's an additional step, with an additional app. This used to work in previous versions of Adobe Audition.  Is there any way to fix this? I'm currently using, 25.6.0.97 on Windows 11

Hello, I’ve run into a strange issue with Adobe Audition. After watching the Help → Learn Audition video, one of my screens suddenly turns completely black. The black screen only appears when Audition is running – if I quit the application it disappears, but as soon as I relaunch Audition, the black screen comes back. System details: •  macOS 15.7.2•  MacBook Pro (M1 Max chip)•  Adobe Audition (latest Creative Cloud release) I haven’t tried any fixes yet, so I’d appreciate advice from anyone who has experienced the same behaviour or knows how to resolve it. Thanks in advance.

I'm having the same problem, but on my imac. Just updated to mac OS Sequoia 15.7.2 last week. I've tried everything to resolve the issue. I've uninstalled and reinstalled Audition, reset Audition's preferences, installed the previous version of Audition, reached out to 3 different support tech people at Adobe--nothing's helped. For me, it crashes when I select an Effect in the Effects Rack. But only once... then it lets me do it about 6 more times before it crashes again. So weird! I hope Adobe fixes this issue asap. It's unbelievably frustrating, as I use it all day for my work.

I am running 11 on a new computer, when I installed the newest version of Adobe Audition the program crashes nearly daily and on days when I'm busy using it it crashes repeatetdly. For example in the past 2 hours I have had to close the program and restart it 5 times. This is unacceptable and VERY dissapointing especially after I just renewed my subscription. I have spoken to a couple other commercial producers and those of us who are uppdated are expierencing the nearly daily crashes. Adobe Audition needs to do better.