Bridge

If I make a mask (say using the select subject tool) and then try to add/subtract areas from that mask by selecting "brush" then the brush tool disappears when I try to move it over the image... so I cannot see where the brush is or how to move it... I don't think the brush is actually working then anyway as I cannot seem to be able to subtract anything even when I manually change the brush size. Sometimes it seems to half work and sometimes not. I'd say for sure that using the brush tool to add/subtract from, at least, masks generated by "select subject" is very flaky now compared to how it was in earlier versions. So much so that I am now having to find workarounds rather than tray and work out what the issue is. This appears to affect editing of DNG files but not (say) NEF raw files, which I seem to be able to edit as I did before. Bridge - 15.0.2.432Camera Raw - 17.1Intel Mac running Sequoia 15.2

loop view video view image tears as you inspect the image, suspect hardware incompat with video support on M4pro silicon chip

Unless in full screen, the folder link tree looks like this. Totally unusable. I have to find the correct folder via finder and drag it to bridge.

I copied about 200 photos to my Mac from a camera whose date and time were exactly 1088 days, 3 hours, 21 minutes, and 28 seconds behind the correct date and time. I discovered that the user interface to set the "Date Time Original" field in the Exif metadata only allows the user to adjust the time on a batch of photos by a maximum of 24 hours, 59 minutes, and 59 seconds. I had to adjust the batch of photos by 3 hours, 21 minutes, and 28 seconds, and then tediously go through and change the date on each and every photo individually by 1088 days. The user interface should have a field where the user can also specify a number of days to shift, or failing that, a much larger number of hours (in my case, 1088 days x 24 hours, or 26,112 hours).(MacBook Pro 16-inch Nov 2023, Sequoia 15.2, Bridge 15.0.2.432)

When a video clip, say a .mp4 file, is selected from the list in my Content panel, and I hit spacebar to play it in full-screen mode, nothing happens. This is on my MacBook Pro 16-inch Nov 2023 running Sequoia 15.2.I can work around this by selecting a static image, say a .jpg file, that is also in the list in my Content panel, hit spacebar to display it in full-screen mode, and then use the up-arrow or down-arrow to get to the .mp4 file. The video then plays in full-screen mode as expected.(MacBook Pro 16-inch Nov 2023, Sequoia 15.2, Bridge 15.0.2.432)

Versions of Adobe Bridge: v14.0.3, v15.0.0Operating Systems: macOS Monterey 12.7.6, macOS Sonoma 14.7.2When using the magnifying glass in preview-window on small images (i.e. 640x400px) it shows a wrong facetted-effect.I used Bridge CS6 on El Capitan before - there the magnifying-glass-window was always correctly filled completely with the selected magnification as shown in the attached screenshots.It's reeeeally annoying when using it for detail research on several images with different sizes.

Adobe Bridge is crashing when selecting any AV1 encoded video files.Thumbnails are not generated either.Running:CPU: Intel 12700kGPU: Intel B580

If the keyword assigned to the file contains the Turkish characters "ş ve ğ", these files are not found when written in the search box. I wrote to you before, but no one cared. This problem exists in all your cc versions. I have been experiencing this problem for about 10 years and that is why I have to use the bridge cs6 version. This error does not exist in your macos versions. It only exists in windows versions. I tried it in windows 7,8,10 and 11 and it gave an error. It has nothing to do with the operating system. I think it is caused by an overlooked error in the bridge language files. I currently have the latest version installed, but the same error still occurs. I have thousands of files. If the keywords of these files contain the letters "ş ve ğ", it does not find these words when I search for them. Your customer representatives have connected remotely many times and could not find a solution to the problem. They accepted the problem and suggested that I write it in this secti

I just updated Bridge to version 15.0.1.412. Then I copied a folder of recent negative scans to this computer and opened where the folder should be but couldn't find it in Bridge. I tried moving it around, changing folder properties like sharing to everyone and removing "read only" but I still can't find it. I then created a new folder in Bridge but it didn't show up in Windows File Explorer. I copied a file from the folder Bridge couldn't see to one that it could see (using File Explorer), then checked inside and Bridge doesn't see the file. Very strange. I can edit the files by dragging them into Photoshop from File Explorer but the problem just seems to be with Bridge. Does anyone know what I'm doing wrong, or is it a Bridge Bug?

When creating a series of folders, the naming process hangs after 2nd or 3rd operation. While the new folder is established, it keeps the default German name (Neuer Ordner), but cannot be renamed.Bridge version: 15.0.1.412

After I enabled extended Ai settings, when I copy and paste develop settings from a raw file to another, the settings don't get applied. I tried many times and I could only paste the settings in camera raw not from bridge. I was focused on the spot removal tool so my main issue was to copy spot removal settings from photos with the same lens. Disabling the new Ai features from camera raw settings seemed to solve the issue.

Images edited in Photoshop, then saved as JPGs are unsharp when viewed at 100% in Bridge 15.0.1.412. 100% previews saved in cache.Purging cache temporarily eliminates the problem, then editing another image results in a repeat of the same issue. Purging cache again clears the problem.Images are typically saved at 6K. I haven't seen this issue with previous versions of Bridge.

My Bridge 2025 Smart Collections don't work on my new pc, but they work perfectly on my old pc. Both pc's are win 11. I have done the following:- Created new collections on new pc. They don't work.- Exported/Imported keywords from old to new pc- Copied files from old pc Collections folder into new pc Collections folder. They still don't work.- Compared Preferences in old/new pc. They are identical. Any suggestions, please?

When I rate my pictures (one, two... stars) and select (for example) "show two or more stars" Bridge 2025 keeps showing all pictures - which makes using this version useless for me. With Bridge 2024 works as expected.

Bridge Version 15.0.0.397 on Windows 11- Select a consecutive group of images- Right-click. Open in Camera Raw- Edit in Camera raw- Press "Done" in Camera Raw to exitObserve: Selection is now shifted one to the right: The first is unselected, the next one following the original selection is included in the selection.Expected: Same selection as I started with.

Panning in slide show, zoomed in to 100% or 200%, the image gets blurred and never refocuses again. This is very frequent, >40%. Workaround is to change to another image and then back.

Zoom into 100% or 200% in slide show often zooms in to the wrong coordinates. It is a frequent issue > 50%. When this happens, then it is 100% repeatable until I close the slide show.

unable to rate photos while in the culling process. IT will work for one photo and then stop working all together on the rest of the photos. some memory cards it allows me to rate & others I am unable to get anything rated. I've restarted my computer tried multiple things and nothing. I have not experienced this until the recent update

Help - when I edit a photo in ACR it changes the "Date Created" to be the same as the "date modified" so I'm unable then to sort the images by date created once they've been edited which throws them out of sequence. Not ideal for wedding editing. How do I stop this?

No text available

I'm using Bridge 15.0.0.397 on a Mac running Sonoma 14.6.1. The Preview panel should scale images up to fill the window, or at least have an option to allow for this. It is very frustrating to see a tiny image in the middle of a vast empty Preview panel (see attached screenshot). I have the same problem when previewing an image from the Content panel using the spacebar.

When viewing Fujifilm .raf raw files, the embedded preview is not shown correctly. It's shown as a corrupted bitmap. It's always necessary to generate a preview, slowing everything down. Please fix.

Adobe Bridge is failing to convert Camera Raw files into Jpg files using Tools>Photoshop>Image processor. the files get opened in Photoshop but do not get saved. an error is reported and the files remain open in photoshop

Newly created subfolders will not be displayed in the navigation/folder panel unless you perform a complete restart of Bridge. Since the required little subfolder ticks on the side are missing, it is not possible to access or drag and drop anything into the new subfolder without a restart.The manual refresh button doesn't help either as it will only affect the image content panel, not the file structure/navigation itself. The best would be to automatically refresh both automatically without having to look for an extra button.

Bridge version: 15.0.0.397OS: Windows 10 (version 10.0.19045.5011)System language: US EnglishSteps:1. Navigate to a folder with HEIC images displaying thumbnails correctly.2. Rename a file to contain a "special" character, any of the following will break it:* ？(fullwidth Question Mark, U+FF1F)* ü (u-umlaut, U+00FC)* ５ (fullwidth digit five, U+FF15)* 中 (Chinese, U+4E2D)* な (Japanese, U+306A)* к (Cyrillic, U+043A)3. Right click on the thumbnail and choose Purge Cache for Selection.Expected: Thumbnail will be regenerated, previews will display image.Actual result: Generic placeholder image appears for thumbnail and preview (attached).Workaround: Rename file to remove special characters, purge cache to get clean images, undo to change filename back to original.