Bug Reports

In editor, now when I want to record a selected area, for example, when I want to record room tone over a selected area between spoken sentences, it stops short of the selected area.  It will record most of it, but not all the way to the end of the selection.

My boss is recording into audition through a Rodemaster Pro board. He records very frequently and usually the audio sounds fine, but once every 10ish recordings he gets audio that comes out like this. He's recording in 44100, 32 bit. Any suggestions? Thanks in advance. 

Hello everyone,I have a problem.  While playback of my recording, about every 30/40 seconds master track mute for a second. I have a proper output in preferences. There are no changes on volume envelope. The bigest problem however is that seconds od silence are kept in exported file. Please help, I want to get rid of that issue. Exported session belowBest Regards

so i have used adobe with the same micriphone on my like 5 year old pc. when i changes it to my new windows laptop i got recently its no longer working properly. when i record audio it records like 0.400 seconts. i have looked at a lot of things here and here is a list of things i already tried that i can remember.1. checked if audition has acess to micriphone2. restarted computer3. miciphone works in other apps

So I've had Audition (23.1.0.75) on my 2019 macbook pro (2.6 GHz 6-Core Intel Core i7) for a few months now. In the last month it has started crashing frequently and at times autosave is not saving (set to every 3 mins) so I am left with a back up that was from 4 hours ago or something. It also runs quite slowly at times during playback - with cutting, fading, moving, etc. lagging as well as the levels meter at the bottom. I am dialogue editting so will have around three tracks of around 40 mins. I also mix etc. in Logic so will have ZERO pluggins in use in Audition. Closing other applications also has no effect and the laptop has plenty of storage space available. So seems like it wouldn't be a CPU thing? Anyone have any ideas on how to fix this? Or experienced something similar?

Hello everyone,I have a problem. Since yesterday Audition is acting weird. While playback of my recording, about every 30/40 seconds trackt mute for a second. I have a proper output in preferences. There are no changes on volume envelope. The bigest problem however is that seconds od silence are kept in exported file. Please help, I want to get rid of that issue.Best Regards

Whenever I try to record on Adobe Audition (macOs Monterey 12.6, up to date with Adobe updates), the audio is very, very distorted - sounding clipped and robotic. I've attached a sample.I tried recording on other programs including Audacity and Garageband and the recording is completely fine. It's only happens on Audition.Do you know what's going on here and how I can fix this?

Hi there,I'm editing a podcast, and was in the closing stages, when my little son came in and plugged the hard drive cable out from the laptop (and played with the keyboard for around 10 minutes). All source files were on it. The software crashed, I tried to recover, but when I load it, the original sound file with the recording in it, was overwritten somehow. It is in its original folder and it is when I open a backup file. Nor the file became shortened, but when I open it, I saw the soundwaves, but there's no sound (no mute, of course) - other file in the same multitrack session is working. Is there a way I can recover the original version of my source file? It's a wav.

I've had this issue several times.When I come back to Audition after several hours (e.g. next day), it is still open and I can see my project, but wherever I click on  within the program - it disappears from my screen which switches to the browser.It is still open, I can get it back from the Task Bar - but can't do anything with it or in it. Have to shut it from the Task Manager - as there is no other way available - and reopen. Is this a known issue? Windows 10 64 bits. Audition version - 23.2.0.68. Firefox.  

Hi there!I'm having some trouble with the audio playback inside Audition when using my focusrite Scarlett 6i6 interface.When I hit the spacebar for the playback in a multitrack session, the audio arrives with a slight delay in relation to the "head thingy" that slides over the track. That makes podcast editing quite hard. However, when I hit the spacebar a second time, then the audio shows no delay.Any ideas on what could be happening?  I'm using windows 10 and audition 2022.  

Guten Abend zusammen, bei der Nutzung von Adobe Audition habe ich bisher immer Effekte aus dem Effekte-Rack benutzt.Die vorgegebenen Effekte von Audition haben mir gut gefallen.Insbesondere der "Radioansager" Effekt.Leider habe ich diesen aber aus Versehen aus den Vorgaben gelöscht.Ist es möglich, diesen Effekt wiederzubekommen? Vielen Dank im Voraus. Viele GrüßeFinn

Once a file is inserted in the multitrack, the name never changes even though the filename changes. Filename in track is "230201_140_Noah_Tr1.WAV", which was the original filename before making modifications and doing a Save As. Whereas filename everywhere else is the correct name, "230201_140_Noah_Tr1e.WAV". It is a wrong reference and causes confusion and extra effort to verify. See attachments.

Hi All, I recorded a voice over and upon play back it sounds choppy, like talking into a fan or a Darlek from Doctor Who.  Please see the below screenshot for the waveform and attached .wav file. It peaks and attentuates at a regular a rate (perhaps something to do with sample rate/clock?)  I have recorded hundreds of Voice overs before with this setup, including the the day before this happened - I have changed nothing apart from turned everything off and returned in the morning  - something appears to have changed randomly.  Any help to return to normal would be appreciated. Some useful info:MacBook Pro (15-inch, Mid 2012)Processor 2.7 GHz Quad-Core Intel Core i7Memory 8 GB 1600 MHz DDR3Graphics Intel HD Graphics 4000 1536 MBAdobe Audition 22.3.0.60Mic - AKG C414Interface UA Apollo Twin DuoThis issue also occurs when removing the above mic/interface and recording directly via the in-built mic on my laptop. It does NOT occur when recording

There is a separate topic about troubles with Adobe Enhance service not working, seems it's back online but I have processed several files with elderly people's interviews and the result was terrible. I did the same thing about a month ago and was surprised with the result and now it's not working. And I'm not the only one who faced this problem. At least there is one more guy noticed that. Did anyone spot the same changes? 

I used the "Export to Adobe Premiere Pro" function, and once in Premiere found that my mix was off and that my levels were now slightly peaking.  I have 16 tracks with a fair amount of pre-rendered effects in Adobe Audition before exporting. I had to remix my tracks once in Adobe Premiere. Any one have a resolution for this? Also, a real shame there isn't more of a dynamic link to move back and forth between these softwares. The work flow feels so restricted and cumbersome. I tried an OMF export, which failed everytime I tried to export it out of Audition. Just wanted to address some technical problems I've been bumping into to.

Hi, I've observed this strange behaviour that's causing me problems.If I apply Stereo Tool VST effect with a certain preset to a track directly (Effects/VST), I get a certain result (the expected one).When I apply the same VST effect with the same preset via Favorite or Batch process using that Favorite, I have a different result to the first 3/4 seconds of each song. The rest of the wave is identical.I tried different settings in Preferences/Effects to no avail.Is there a workaround or a solution to this problem?Audition 23.1.0.75 on Windows 11.Thank you.

HiIt has already happened to me several times that after Merge clips in Multitrack mode randomly such problems occur:Before merging: After merging: In the sound it is a large high-frequency noise (here it even duplicated itself).Such situations occur randomly, in different projects, with different effects. I have not found common parts except that it is so short that it is difficult to catch after export.What could be the cause of this and how to avoid it?MacOS 12.6.3MBP M1 Max, 32 GB ramAudition: 23.2.0.68

On version 23.2. I was able to record audio and edit, however when I went to save the file audition froze. It would not allow me to close the program or do anything, I had to restart my entire computer to force audition to close so I could try again. Exporting did the same thing. I did eventually move the track to a multitrack and was able to export it that way, however it still would not save the file. Any time I select "save" or "save as" the program would freeze. I have uninstalled and reinstalled audition several times, restarted my computer, updated media encoder. What else can I do to fix?  

I was working on a multitrack session and everything worked fine, but suddenly, when I try to open it, the program crashes after finishing processing the files. What can I do now? Working on Audition 22.6.0.66 on macOS Ventura 13.2 on Mac with M1.

The latest "upgrade" to Audition removed support for ulaw.  This format is crucial to anyone working in the telephony industry.  My clients depend on it for their phone systems.  I depend on Adobe to keep useful features.  Please return it.

Hi there, I've been encountering a glitch when selecting specific frequencies in the Waveform Editor of Audition. I have playback set to loop, so I can highlight small areas of frequency (using the marquee or lasso selection tools) and play repeatedly to try and isolate problematic sounds. I've been getting a little blip of full-frequency audio every time the selection loops however, and it's quite off-putting. I've attached a video which shows the problem. I first discovered the issue when I was using a Macbook Pro 13 inch, mid 2012 (OSX Mojave 10.13.6, running Audition build 14.4.3.4) and have recently upgraded. I'm still encountering the same issue on a Macbook Air M1, 2020, running OSX Monterey 12.6.3, using Audition build 23.2.0.68. Thanks!

Audition Build 23.2.0.68Edition Windows 10 ProVersion 21H2Cannot play a file when switching from multitrack view to waveform view then back to multitrack view without minimising the program once, sometimes twice, or reconnecting the usb interface. This happens everytime I switch views.I've been using Audition 3.0 for many years and have never had a problem. My only reason for paying a hefty subscription is the fact that it supports certain VST's. My 14 day cancellation is quickly approaching and I need a solution soon. Thanks.

I have a license Audition 1.5 and an upgrade license to Audition 2.0.I tried to install Audition 1.5 in Windows 11, but as soon as I install the upgrade to 2.0, it already fails during the installation.In my Windows 10 PC I had already deactivated Audition 2.0 about 5 years ago and now it is no longer possible to activate this version.I get the message 'Activation server unavailable' and if I want to activate by telephone (31) 020 201 3805 I get the message that this number is out of service.To ask:1. How do I activate/deactivate my Audition 2.0 on my Windows 10 PC?2. How do I activate/deactivate Audition 1.5 and the upgrade to 2.0?

my file got corruptet when my audition crashed, i cant open it on my laptop and when i send it so another mac i says the file is offline. and i cant open it on my laptop so what so i do now 

I am not sure what is happening or how to describe it.  This started happening halfway through the episode.  Both my audio and his were fine.  All of a sudden his started to drag and sound strange.  The wave lines are also a reflection.  I checked the speed there isn't anything different with it.  My audio was fine throughout.  I am using Audition 23IMac OS Ventura 13.1