Bug Reports

I have the same problem. Also in camera raw. Have tried beta version as well. Windows 11, Intel core i7-Ultra, 32gb ram, Intel Arc graphics. My photoshop system info:   {Moved to new thread & attached system info}

Info panel doesn't show "before" values, only "after". (Photoshop release 26.8.1).  Every section of the panel show only one value, even for custom sample points, check screenshot attached. Is it a bug?  

I'm having this exact problem on Photoshop as this user. How do I fix this? It only happens on my laptop, on my PC it works fine

Toggling Dynamic Text on and off with the options bar icon causes the entire text box to move on the canvas.   1. Drag the Text tool to create a text box 2. Type characters into the text box 3. Click the Dynamic Text button on and then off again   Expected: Text box remains in original location Actual: Text box moves on the canvas   Please see linked screen capture video   Tested on macOS PS 26.11.     https://www.dropbox.com/scl/fi/pdogtea7pao8jhrgppn95/Screen-Recording-2025-09-24-at-2.23.31-PM.mov?rlkey=0jsaft6qx8brku194gsynopb8&st=mza6iezf&dl=0

I'm experiencing an error, specifically with screenshots taken on my iPhone 16 Pro with the new "HDR" screenshots option enabled in the iOS 26 settings (General > Screen Capture > HDR)   I'll attach an example screenshot HEIC file, as you can see it causes the same error as OP. If you can't reproduce with it I can attach system info and try some other troubleshooting.   The setting:    Error box. It happens in both the Photoshop beta (27.0.0 20250921.m.3233 a60f1d2 x64 (beta, PublicBeta)) and stable (26.10.0 20250811.r.7 595d3a6 x64 (final, Release))   The error does not occur with HEIC images that were taken with the camera for me, only screenshots it seems. And only the HDR screenshots, because otherwise they're taken as PNGs.   Also importantly, Windows explorer will not show a thumbnail preview of the HEIC files that cause an error in Photoshop (but will show thumbnails of "working" HEIC files like the ones from the camera I mentioned). So I th

I use many actions - most with several steps and many with keyboard shortcuts to start them. Before 8/20/25 PS update, when I used a keyboard shortcut to start an action, the "Actions Panel" would go to that action and show the steps, highlighting the current step.  Now, the step is still highlighted, but the panel does not update, so I have to manually scroll through the actions to find where I am. In addition, a few of my keyboard shortcuts have "broken" and will not work to start the action.

Hola! tengo el mismo problema, borrando las carpetas FontFeatureCache y  CT Font Cache el problema parece solucionarse. Pero una vez que se vuelve a abrir el problema regresa. Alguien ha podido solucionarlo definitivamente?

This is what the gradient style selector looks like when a gradient is applied to a shape layer's stroke. It appears very wide and with options overlapping each other vertically. The same selector for gradients on a shape's fill appears normal. This also appears this way when it's accessed through the control bar when the Shape tool is selected.   This is on Photoshop 26.8.0 on Windows. {Thread renamed by moderator}

Photoshop layer comps is not remembering position or appearance despite having those switches turned on. This is happening across several files.Adobe Photoshop Version: 2017.0.1 20161130.r.29 2016/11/30:23:00:00 CL 1099099  x64

Can not export any legacy formats.I have enabled photoshop 2021 in the systems security permissions for full disk access and the same for files and folders and accessibility, after having read some of the previous advice on here for older versions of photoshop and OS, but to no avail. An error message appears every time I try to save for web legacy - It's an animated GIF I'm trying to export. An incredibly frustrating fault that needs to be addressed soon!    {PS-75070}

After the recent update of Photoshop I'm having an issue with my Surface Dial's function in the app. The brush menu isn't working, if I select the brush icon my on screen dial becomes temporarily transparent and then disappears without pulling up the secondary brush menu which allows for brush size, opacity etc to be selected and controlled by the dial. I use these functions constantly in my work flow so it is certainly annoying although not impossible to work around. The dial seems to be functioning normally outside the app and can still for example control volume level or zoom in and out, but the primary function I use it for is brush control; particularly brush size. Does anyone have any ideas on how to solve this?  I have tried: Unpairing and repairing the Surface Dial to the computer. Removing batteries to reset the device. Resetting the computer and resetting Photoshop. I am using the ~spaces plugin work around to prevent touchscreen crashes that came with the new update.

Issue:  Photoshop version: 26.10.0 20250811.r.7 x64 (final, Release) OS: Windows 11 64-bit (10.0.26100.4946), 4070 RTX (mobile), i7-13700h, Windows HDR enabled Steps to reproduce: Create a new 1000 x 1000 px document., RGB, 8 bit. In [Edit > Color Settings...] enable "Blend RGB colors using gamma 1.00". Enable [Settings > Technology Previews > Precise color management for HDR display], butit seems to be irrelevant (that's the only other setting I changed since Photoshop installation). Create 200 x 200 px, #00f blue raster square with 50% opacity ("Normal" blend). Ctrl + J to duplicate this layer. Group them. Fill bg to say #eee. Notice that the color they have is #6767f8 (correct I assume). Move the group with the Move Tool (V) and notice the color changed to #7f7ffb. Use zoom/pan (Z) and notice it flickered back to #6767f8. It's even possible to duplicate this group and fix both copies by the zoom tooland then drag only one of these groups with Move Tool (V)

alguien me puede colaborar con este error al abrir photoshopp

In PS 2025 (26.9), running under macOS 15.6 when I choose the Selection Brush Tool and then look at the status bar popup for "current tool", it says that my current tool is the "Brush".  If I choose any of the other tools in the same toolset as the Selection Brush Tool (e.g., Lasso Tool, Polygonal Lasso Tool, and Magnetic Lasso Tool), the status bar popup for "current tool" shows that my current tool is the Lasso, Polygonal Lasso, or Magnetic Lasso--the way it should.      When I have the Selection Brush tool active, the status bar popup should say "Selection Brush" (not just "Brush").  

It's been happening for a very long time and I usually just go back in the history, save and open again, but this time it bugged me a bit so I decided to post it as a bug:It happens at random, sometime I can go without it happening for several months and then it happens again, with completely random files.Basically you can look at the video and you'll see the mask starts to degrade as ifi it was corrupted file or something similar.For the amount of time I have seen it happening, I have had 4 computers, both laptops and desktops, countless different Photoshop versions (I try to always be up to date)Just to state that there will be no point sending a file to someone else to check, as saving it at a state where the mask is correct and open it again solves the issue. If I save at a corrupted state, Photoshop saves the corrupted state and one cannot recover the original state. I never save the corrupted state as it's client's work, and it didn't happen today so I couldn't share a .psd here,

I'm using a large image file (11520x23680). When you make a crop selection and zoom in the view incorrectly jumps to the center. See attached video. Steps: Make a crop selection with the crop tool. Hold ctrl-space to get the zoom tool. Drag zoom in. The view will jump to the center, but it should have stayed where you zoomed in.

My Brigtness / Contrast tool window pops up DEAD CENTER every time I open it so it's right over the image.  I move it off to the side off the image but it doesn't stay put. Next time I open it it's right back at dead center.  Every other tool window in PS stays wherever I move it. Why won't this window stay put?

Gradient "Tool Presets" are not working - PS is not saving gradient type and other settings, the only value saved within preset seems to be opacity.   Im not able to point to the specific version of Photoshop where the issue appeared, definatelly all 26+ Its the same issue on Windows and Mac OS   Please note im not talking about gradient colour presets but the TOOL PRESETS:   Anyone should be able to easily replicate the issue - just save 2 random presets with different settings and try to use them...   To Adobe: how many customers would need to confirm its a problem for them too so it actually gets look into?   To moderators, please dont merge this thread with any other random one - it doesnt help at all! Similar issue here   

Hello, after the update from v26.8.1 to v26.9, the following bug occurs: My workflow involves precise layer naming. I often have to re-use the same part of a layer name convention, so for sake of speed, instead of writing the same name convention on a layer hundreds of times, I use to copy-paste the layer name from one layer to another. To do that I use the shortcut ctrl+C and ctrl+V. Unfortunately after the latest update, the copy paste function for layer NAMES stoped working and no name is copied/pasted. The layer itself ist copied instead. Neither restarting PS does help, nor re-installing it. Hope this can be solved quickly. Thank you in advance for your concern.

This happens in both the "Quick Export as PNG" as well as the "Export As..." options. Every now and then, a layer which is definitely hidden is still showing up in the exported image. This is happening right now; the image in my document looks like this:Which is what I want. However, when I make absolutely no changes and export this file, I end up with:This red tint comes from a translucent fill layer, which is DEFINITELY hidden. This version of the image is also what appears in the preview window when I select "Export As..." from File, which makes absolutely no sense. Is this a known issue, and if so, is there a solution?

Hi, whenever I try to use one of the gradients I've created using Adobe Color, I get the ominous "Could not complete your request because of a program error." message. This happens both with "Apply Gradient" and "Create Gradient Preset" in the Libraries panel.   I've encountered this bug both in current Photoshop Beta (Adobe Photoshop Version: 24.5.0 20230412.m.2137 91413a4 arm64) and Photoshop 2023 (Adobe Photoshop Version: 24.4.1 20230418.r.449 53a6c60 arm64). Running macOS Ventura 13.2.1 (22D68). Photoshop User Diagnostic Plugin output is attached for both beta and current Photoshop, also system information from beta.

Hi everyone,I recently updated my Photoshop to the latest version, and I noticed a change with the Rectangle Tool. Previously, after drawing a shape with the Rectangle Tool, I could see four corner radius points which allowed me to adjust the curves individually using the Move Tool. However, after the update, those points no longer appear or respond as they used to. Is this a known change in the latest update? Or is there a new method to enable corner radius control like before? Would really appreciate any help or suggestions. Thanks in advance!

There is already a discussion in the community "Brush Outline/Circle disappearing intermittently (NOT CAPS LOCK) ". But since I have figured out in detail how to reproduce the behavior and when it becomes present, I want to report the issue officialy that Adobe hopefully will fix this in one of the next upcoming patch releases.   OS Environment: Win 10 Pro 64bit 21H1 Adobe Ps 23.0.2   The issue is only present in combination when using Masks on a layer! Create a new document (white, black or transparent layer) Add a Mask to the layer Select the layer OR the mask (independent on what you want to paint) Select the brush tool Try to start moving the mouse quickliy and pressing the left mouse button nearly at the same time and keep the mouse button pressed Try to repeat until the you get locked in the issue and the brush circle disappears and the mouse arrow becomes visible   When working with a mouse as input device, the chance to facing this issue is probably

Why are the MS Fluent Emojis burned in the latest Photoshop update (the smileys and characters)? I didn't have this problem before!    Probably a new cake that Adobe has baked for us with garbage AI!    

I am using Photoshop 24.0.0. When I use the font Leander Script Pro Bold (a script font), alternate letters show when I rollover the letter, but when I try to choose an alternative, it doesn't change. I opened the file in Photoshop 23.3.2 and it worked just fine.