Bug Reports

مرحبًا فريق دعم Adobe،أنا أواجه مشكلة خطيرة في برنامج Adobe Premiere Pro (نسخة Beta). كنت أعمل على مشروع فيديو بشكل طبيعي، وأغلقته بطريقة صحيحة، لكن عند محاولة فتحه لاحقًا ظهرت لي رسالة تقول:"The project appears to be damaged, it cannot be opened."جربت فتح نسخ الحفظ التلقائي (Auto-Save) لكن جميعها تعطيني نفس الرسالة. بعد ذلك قمت بتحديث نسخة Premiere Beta، ولكن المشكلة ما زالت موجودة ولم أتمكن من فتح المشروع.حاولت أيضًا استخدام أدوات لتعديل إصدار المشروع وفتحه في نسخة أقدم، لكن لم تنجح أي طريقة. الملف يحتوي على مواد مهمة ولا يمكنني إعادة العمل من الصفر.أرجو منكم مساعدتي في استرجاع المشروع أو تقديم أي حل تقني ممكن. إذا كنتم بحاجة إلى نسخة من الملف لتحليله، يمكنني إرسالها مباشرة.شكرًا مقدمًا على دعمكم.

"When I use Adobe Premiere Pro Beta to 'Replace with AE Composition,' I can't bring the Premiere materials into AE. There are no materials on AE, and I can only create a new composition.My Premiere Pro Beta and AE Beta have both been updated to the latest version."

Transform effect turned non gpu 25.6 B45

Específicamente, el corte de transformación no funciona en esta versión de Premiere Beta. Lleva una hora de estar en la línea de tiempo y nada. No funciona.

Lately the "Enhance Speech" feature is also adding an echo effect, I can hear two audio tracks playing at the same time, the other original audio and the enhanced audio, creating an unwanted echo artifact effect.

Standart-Medienskalierung funktioniert nicht. Keine Automatische an Frame anpassen oder skalieren.

When exporting from the new mobile-app, the captions made on mobile is not transfered to the desktop-app.

bazan obje maske aleti kayboluyor ozamna programı kaldırıp yeniden kuruyorum geri geliyor buna bir çare bulmak gerekli Sometimes the object mask tool disappears, then I uninstall and reinstall the program and it comes back, I need to find a solution for this. 

Ayer trabajaba superbién, sin problemas, fluido, hoy actualicé y no reproduce. Se "pega", hace saltos en la reproducción, no es nada fluído, se comporta como si tuviera miles de gráficos animados en mi TL y no es así. Simplemente es imposible hacer algo. Su rendimiento está extremadamente lento. Dios...  Ayer esto mismo que se ve en el video, corría muy bien. Fluido, sin bajadas de fps. Hoy no hice nada más que actualizar y ya es imposible visualizar algo mínimo... Versión a la que actualicé hace minutos: v 25.6.0.084 (2025-09-29)Intenté "bajar" a la versión anterior a esta (o sea, con la que trabajaba ayer) y es imposible... ¿Hay algo que pueda hacer? 😞 

 Dear Adobe Team,I hope this email finds you well. I am experiencing a significant issue with the software that is affecting my work. The system is taking an unusually long time to load, and in many cases, it hangs completely, making it impossible to continue with my tasks. This issue has become quite frequent and is causing delays in my daily operations.I kindly request you to look into this matter urgently and provide a solution to resolve the slow performance and hanging problem.Thank you for your prompt attention to this matter.Best regards,Akshay Vanani

I recently updated Adobe Premiere Pro Beta from version 25.4 to 25.6.0.084. Since the update, using the Transform effect has become extremely laggy. Adjusting the Position (X/Y) or Scale sliders often does nothing on screen, or the program crashes. I usually have to render the sequence in order to make it not lag anymore (which i've never had to do before). But this isn't even helpful becase i didn't see what I did prior. Also my masks for objects in a car look fine when I double click on my nest but when watching them on the actual sequence it's inaccurate. So basically as far as im concerned, everything works except transform, if I change anything in transform instead of turning yellow on the timeline like it used to it turns red.

Opening the app, as soon as it displays the Premiere pro project screen, that lasts maybe half a second and the app simply closes ... disamappears. No crash notice, just gone. Ryzen 3960x, 128GB of RAM, 2080Ti. Shipping PrPro works normally. The previous beta build worked fine also.

When I tried to replace a clip with an After Effect composition using ll Beta apps, I was send to After Effect and the composition is created in AE but it doesn't import my clip.I have all my software updated to the latest version.I have a Macbook Pro maxed out on specs so no problem on that side for me.Does it happen to somebody else recently?

I recently switched graphics card to a 5070 and since then my primere pro v.25.5 has crashed instatly when booting up projects. I have cleared my cache and removed presents, reinstalled and looked in to if it might be because of my drive. I have also tried to install earlier versions of primere such as 24.6.8 and that hasn't worked either. Does anyone know what I should do?

Moving in and outpoint from a clip from the timeline is still garbled in the Source Monitor B78   Sorry cannot find my original post  

If I double click on a audio clip in the timeline with the cti on the clop to open in the Source monitor I often have to double click twice in order to get the CTI showing up in the Source monitor at the given frame. B78 This has been going on for a while.

新しいマスクをオンにすると、不透明度のマスク機能が使えないので、オフにすると、ファイルが開かなくなる 

As you can see in the video attached, the selection tool is so buggy. I cant expand clips smoothly or even expand it sometimes, how can i solve it

Had 2 video clip and audio clip disappear from the timeline.   This was an issue in earlier versions and fixed, but it looks like its back (although I never encountered this in earlier versions) Scaling is set to 150 (recommended) and turning off GPU acc is not an option. If I grab the clip where it supposes to be and drag it up and then down it appears again. https://community.adobe.com/t5/premiere-pro-bugs/p-clips-disappear-on-timeline-does-anyone-else-have-this-issue-with-the-new-update/idi-p/14926451     B25.6.0.78

When I enabled the new automatic masking object tool, the "replace with after effects composition" doesn't work. It will create a composition in after efffects, but the footage files itself won't go with it. 

Version 25.6 (BETA) is not identifying different voices when generating Auto-Transcript. It only identify "Unknown".

Dear Adobe Support Team,I am writing to report a recurring and highly frustrating issue I have been experiencing across multiple Adobe products—most notably in Premiere Pro, which I use extensively for video editing.The problem arises whenever I try to interact with dropdown menus or selection options. For instance:Changing resolution or screen fit resolutionSelecting different presets during exportChoosing formats while exportingIn all these cases, the options simply do not respond or allow me to make selections.To rule out hardware issues, I have tested with multiple mice (including a newly purchased one) and tried different settings, yet the problem persists. This confirms the issue is not mouse-related.This situation has become extremely disruptive to my workflow and is making me reconsider the value of maintaining an Adobe All Apps subscription.For your reference, I have attached a screen recording that clearly demonstrates the issue. I kindly request your urgent assistance in res

When mercury is enabled, the trim mode doesn't work.System - Mac Studio M2 ultra 64GB OS Sequoia 15.6.1 Premiere Pro Beta 25.6.0.080 I tried changing monitors, disconnecting one, changing the primary monitor, and cleaning the case.Opened a new project and tried uninstalling and reinstalling, but nothing seems to work.  Any suggestions?  

On top of that, the software, as it is now, is rendering around 50% slower than before (any project), now it's sluggish, it's almost, if not impossible, to work with it anymore. So I think that the dream is over, I'm going back to the release version, it's impossible to work like this, the text editing is sluggish now.

Steps to reproduce:  Set up a multicam and run. Everything works but... Result: ...Timeline indicator doesn't move, while video plays OK and responds to camera choices. Timeline refreshes and shows the correct position on stop.Expected: ...Timeline indicataor to show where you are. It is a bug, or a feature??? System info    Application: Premiere Pro (Beta) v25.6.0.78    OS: Windows v10.0.26100, RAM: 63.79 GB GB, CPUs (logical): 16