Bug Reports

Getting the error message "Matrix cannot be inverted" when trying to open the project window for a very simple project.    Beta 25.0.0.0 build 23

After the update to version 25.0.0.021 on MacOs Sonoma 14.5, the shadow settings in effect control dont work anymore for captions. No matter what I am changing in the settings, nothing happens to the appearence. 

Dragging keyframes in the Effect Controls tends to duplicate those keyframes. It occurs random. Graphics and clips. Build 18 and 22 W11

Steps to reproduce:    1. Create a new project.    2. Create a new timeline (of any resolution and frame rate).    3. In the Project panel, New Item -> Black Video.    4. Use the Black Video asset in the timeline (in any way), regardless if its track is visible or not.    5. Export the timeline in any format -> Send to Media Encoder. Result: Warning "Offline media detected... Missing asset: Black Video" is displayed in Media Encoder and any part of the timeline containing Black Video is encoded with the Media Offline graphic.Expected: Any part of the timeline containing Black Video should be rendered as black in the final output. System info    Application: Premiere Pro (Beta) v25.0.0.18    OS: Windows v10.0.22621, RAM: 31.95 GB GB, CPUs (logical): 8

   Em efeitos foram removido as curvas, onde eu costumo utilizar para recriar o efeito Halation com a Curva RGB e Lumetria.    Eu verifiquei e notei que esta exclusão esta apenas na versão de desenvolvimento do Premiere Pro, se mantendo ativo na versão normal.__________Para mais informações contate hansrezende@hotmail.comOu entre em contato através do WhatsApp +55 47 9 8488 4811Atenciosamente, Hans Rezende. 

ベータ版で記憶したファイルがPremiere Proで開かないコメントは最新版で記憶されたこのファイルは使えません！との事共通で使えるファイルにして欲しい

So, Somehow I think this issue just started to occur within the last week. It shows me this Error, when I export clips.I could already rule out, through trial and error, that this issue is only happening with the "warp stabilizer" effekt on. ´Steps to reproduce:    1. .. . apply warp stabilizer effect on clip2. set the best setting - smooth motion- 25%- Suspect Warp- Stabilize, crop,Auto-scale3. exporting4. wait to see the error in the middle I am wondering, if this error will only occur, when specific parameters are set in warp stabilizer.What could be the source, especially if the effect does not cause any complications in about 80ish % of the time.For one other clip in this timeline, I had the issue, cleared the effect and reapplied it from the effects window, re-analyzed and it worked. Most others just work directly. But this particular is difficult. Thanks in advance!  System info    Application: Premiere P

モザイクが使えない

I'm using the latest Premiere pro beta, and for the last couple updates it seems that the mask with text property for text has seemingly broken.Rather than actually masking anything, it seems as if the mask is created in the top left quarter of the screen with the rest of the screen showcasing the image that should be hidden away. Changing the image beneath, whether it is scale or position doesn't change how the image actually looks.

Having updated a 24.5 project to Beta 25.0 the output appears very high contrast and somewhat oversaturated. This is a sequence with a clip from a Sony A7s3 4k 10 bit 4.2.0 S-Log-3 on a 4k sequence. Premiere correctly identifies the colour space and applies the correct LUT. I have tried various export presets including those for Adobe stock using both hardware and software rendering and the result is the same. I also doesn't matter if I export directly or use Media Encoder. Clip details below... Peter Type: MPEG MovieFile Size: 192.15 MBImage Size: 3840 x 2160Frame Rate: 50.00Source Audio Format: 48000 Hz - 16-bit - StereoProject Audio Format: 48000 Hz - 32 bit floating point - StereoTotal Duration: 00:00:20:32Pixel Aspect Ratio: 1.0Alpha: NoneColor Space: Sony S-Log3/S-Gamut3.CineColor Space Override: OffInput LUT: NoneVideo Codec Type: HEVC 10 bit 4:2:0 (Full Range)

Missing several features? Among them the numbers. No waveform for the blibs Bug or by design?   2025.0.16  

Since yesterday I'm no more able to create captions neither automatically creating text from audio in Premiere BETA. Anyone else having the same issue? 

O painel da ferramenta de transcrição não abre as opções de exportação no botão "..." 

It doesn't work, the image doesn't disappear inside the outline, not outside. Normal crop works. The mask is tracked, but it does not remove the selected contour.

Premiere Pro doesn't send a PF_Event_MOUSE_EXITED event, or one last sequence of PF_Event_ADJUST_CURSOR and PF_Event_DRAW events, when the mouse cursor exists a custom parameter’s UI in the inspector (ECW).  This problem makes it impossible for third-party plug-ins to implement "mouse hovering" effects, such a highlighting a button’s frame and title only while the mouse sits above the control – similarly to how Premiere Pro’s own native controls work. A third-party plugin crucially needs either a PF_Event_MOUSE_EXITED event (during which it can set out_flags->PF_OutFlag_REFRESH_UI and evt_out_flags->PF_EO_ALWAYS_UPDATE flags) or one more round of PF_Event_ADJUST_CURSOR and PF_Event_DRAW events to have a chance to redraw its custom controls without any effects or elements that are supposed to be visible only while the mouse cursor is within its section of the inspector (ECW). Because plugins are not given a chance to redr

I am getting constant "audio and video clock out of sync" warnings when prior to today I did not get these issues. I have sewarched through forums but have seen no solution that has wortked for me. Worth noting: this only happens and it a little glitchy when I hit play, then moments later it evens out and plays just fine. SETUP2023 Razer Blade 15Adobe Premiere Pro Beta (latest version)Processor 12th Gen Intel(R) Core(TM) i7-12800H 2.40 GHzInstalled RAM 16.0 GB (15.7 GB usable)3080ti GUP (just updated)System type 64-bit operating system, x64-based processorEdition Windows 11 HomeVersion 23H2Installed on ‎11/‎24/‎2022OS build 22631.3958Experience Windows Feature Experience Pack 1000.22700.1026.0Audio input set NO INPUT in preferencesSequence set to 48000Hz CAM INFOArri Mini + BMPCC6k @ ProRes 422, 48000HzAudio recording @ 48000Hz\  

Hi, I am using Premier Pro (Beta) and I keep getting an error message saying audio and video clock out of sync. 

Estimados, tengo este error en la version Beta 24.5.0 build 44Probé cambiando algunas configuraciones en ¨audio¨ y no logro una solución. Tengo seteada la latencia en 30ms, probé 40ms y fue peor. Adjunto pict con la configuración.Mi placa de sonido es una Focusrite Scarlett solo con MME. utilizando ASIO con una BM Intensity pro 4k y tengo el mismo problema.Alguna sugerencia???Muchas gracias. Saludos

The PF_AppGetColor() in PFAppSuite has never worked reliably in either After Effects and Premiere Pro, but this is more so of an issue now, with the introduction of Light / Dark / Darkest modes. Here are the main issues with PF_AppGetColor & the SDK in general, when it comes to custom UI: - The various constants in the header aren't documented, and while on first examination they are self-documenting, this isn't the case. For example, you might think that if your custom UI draws a button, it should use the color associated with PF_App_Color_BUTTON_FRAME for its border. But what happens if the button needs to be drawn disabled? There is no PF_App_Color_BUTTON_FRAME_DISABLED. But there is a PF_App_Color_FRAME_DISABLED. Is that what you’re supposed to use? - No indication in the SDK as to the color space in which colors are returned. Are these sRGB? Or perhaps the color space of the main screen? What if the user has multiple screens with different color s

On recent betas that feature the new Darkest / Dark / Light Appearance modes, the API available to third-party plug-ins to determine the background color of the inspector is no longer working. It appears to be retuning black, on all three settings. The PFAppSuite4 PF_AppGetBgColor function is returning the RGB values 0,0,0 instead of the actual background color of the window. This regression breaks any plugins that rely on that API to know what color to fill custom UI in. For example, here is the custom UI of a plugin in the release version of Premiere Pro: This is how the same UI looks in the latest beta, where the API is returning solid black: ...the problem is unaffected by the current Appearance setting. Here is the same UI drawn in Light mode on the latest beta:  

I am posting this both as a heads up and as an open invitation to other developers (and Adobe) to file feedback against the most recent version of Xcode. As of Xcode 16 beta 4 (16A5211f) it is no longer possible to configure any targets that build plug-ins for the Premiere Pro or After Effects SDK. The root of the problem lies in the fact that these targets require a Build Carbon Resources Phase. When such a build phase is present, clicking on the Build Settings pane will crash Xcode. You can verify this on any example distributed with the SDK, or create a brand-new Project and Target. Xcode 16 will let you add a "Build Carbon Resources Phase" to your target only after you have added  an ".r" file (it can be empty.) After that build phase has been added, clicking the Build Settings pane will crash Xcode. Please don't forget to file this bug via Feedback Assistant! It would be rather painful if we find ourselves unable to use the most recent version of Xcode. (And ye

i cant export media via encoder,  premiere pro beta have version 25 but encoder still 24, and buttin is deactive

Always in the past, if doing a mix with the audio track mixer, when stopping after a write, it would switch back to Touch.  Now it sticks on Write, and if I go back on the timeline, it starts writing nodes where I last set the fader. So, this is a church service.  I keep the air mic off while the pastor is speaking.  When singing starts, I hit Write and fade up the fader as the organ begins.  Then I skip to the end of the song and fade the organ out and stop. Now I want to hear that fade out and skip back mid-song and start to play.  No sound.  Then I discover it's still in Write and it has zeroed out the level when I restarted playback. What happened to the automatic switch back to Touch when stopping??? System info    Application: Premiere Pro (Beta) v25.0.0.14    OS: Windows v10.0.22631, RAM: 63.83 GB GB, CPUs (logical): 16

Meine Videos werden nicht auf normale Geschwindigkeit angezeigt zu scnell

Steps to reproduce:    1. Create a multicam sequence2. Look for audio waveform Result: ...Not thereExpected: ...There System info    Application: Premiere Pro (Beta) v25.0.0.14    OS: Windows v10.0.22631, RAM: 63.83 GB GB, CPUs (logical): 16