Bug Reports

In Premiere Pro 24 BETA (Build 13) the second monitod doesn't transmit the video from Source or Program Panel.At the same laptop Premiere Pro 23.5 works OK, so I guess it is not a problem of the system. System: Macbook Pro 14" - M1 Pro 16GBOS: MacOS Sonoma 14.0 (Beta)

After 10 minutes of use. Just scrolling on the timeline, the software ends up crashing. It has happened already a couple of times.  MacBook Pro - 16-inch, 2021Apple M1 MaxMacOS Ventura 13.4 (22F66)64GB 

I try to transcript a timeline with different languages.Trouble occur when I want to see all captions.If I shift captions from other tracks they become unusable. steps;put a caption in a timelineat another caption trackdrag the caption to another trackresult;caption becomes grey and unusable Why can't we set more then on caption track visible? 

Premiere Pro 24.0 BETA (build 😎 crashes unexpectedely during editing.I work on a  Team Project.Uninstalled, cleaned everything, reinstalled, still crashing. Application: Adobe Media Encoder (Beta) v23.6.0.9    OS: macOS v13.4.0, RAM: 128,00 GB GB, CPUs (logical): 24

Productions - new projects or renamed projects don't show until production is closed and re-openedBeen seeing this on every version of Premiere I've tried Productions on from 23.2 I think through to Beta 24.0.8Windows 10

If you step into a multicam with ctrl-double click or a nest with double click and do what you need to do & then close it, you return to the last sequence in the set of tabs, not the one you were in. I feel like this used to work as you would want it to (and return you to the sequence you were in), but I may be wrong. So I don't know if this is a bug or a feature request. 23.6.0.19 and for quite a few versions before that.

When I highlight the line that I want to copy/extract it is greyed out and I can insert/copy/extract the selected part. It does however highlight and add in and out points on my timeline.

Some images jpeg dropped on the timeline dont show the thumbnail and don't play  in the program monitor, I can see it in the source monitor, but it will be black screen when playing or putting cursor over it in the timeline.  Need this resolved asap

Hello, Been trying out the caption feature and I a bad hitch or about 30+ dropped frames every time a new caption is loaded on the timeline. Happens when trying to play captions over a7s III footage.  It is 4K multi-cam footage with two cameras, one fs7 and one A7sIII, and a look applied, but my computer has no problem playing it back. Once the caption layer is applied it has a bad hitch every time the caption changes to the next caption.  The hitch doesn't happen with the underlying FS7 footage, but constantly happens with the A7s III footage layer when that is the selected camera.  File properties for a7s iii:  Image Size: 3840 x 2160Frame Rate: 23.976Source Audio Format: 48000 Hz - 16-bit - StereoProject Audio Format: 48000 Hz - 32 bit floating point - StereoTotal Duration: 00:29:03:12Pixel Aspect Ratio: 1.0Alpha: NoneColor Space: Rec. 709Color Space Override: OffInput LUT: NoneVideo Codec Type: MP4/MOV H.264 10 bit 4:2:2 My computer

Steps to reproduce:    1. ... Result: ...Expected: ... System info    Application: Premiere Pro (Beta) v23.6.0.56    OS: macOS v12.6.3, RAM: 32,00 GB GB, CPUs (logical): 4  Buenas tardes, desde la instalacion de la version beta en mi equipo se viene presentando multiples errores con los audios cargados en la premier proDESO SABER COMO SOLUCIONARLO

When I play a timeline containing H.264 or H.265 media generated from various NLEs in faster than real-time speed (using the L key), the resulting program output does not display the original frames in order but rather skips around to already-displayed frames found earlier in the timeline. Steps to reproduce:    1. Create timeline of any resolution/frame rate.    2. Add AVC (H.264)- or HEVC (H.265)-encoded media to the timeline.    3. Press the L key (or Shuttle Right command) twice or more to shuttle forward. Result: Frames reported as dropped despite no real CPU/GPU usage and program output skips and stutters between old frames and currently displayed frames despite TC and playhead reporting smooth shuttle forward.Expected: Smooth double-speed playback of timeline output. System info    Application: Premiere Pro (Beta) v23.6.0.56 (Apple silicon)    Machine: 2020 Apple MacBook Pro M1  &

I checked this when it was reported in Release 23.5.0.   Steps to reproduce:1 Create a sequence from 1 or more clips. 2 Create a Static Transcription; do not create source transcriptions. 3 Create captions. 4 In the Project Panel, right click the Sequence, and "Open in Source Monitor." Result: The clip name shows in the Source Monitor, but there is no video and no captions. Expected: Sequence will show in Source Monitor. Absence of captions in Source Monitor is normal?   Workaround: After switching various sequences/source monitor/etc, the Sequence shows in the Source Monitor. Once it is showing, deleting the caption track and recreating does not result in the problem. System info    Application: Premiere Pro (Beta) v23.6.0.56    OS: Windows v10.0.19045, RAM: 63.80 GB GB, CPUs (logical): 16  

Steps to reproduce:    1. ...Edit transcription for a while Result: Clicking on a point in the timeline in a sequence no longer scrolls to that point in the transcript (Auto scroll option is enabled)Expected: Clicking on a point in the timeline in a sequence should scroll to that point in the transcript - closing and re-opening project resolves this. System info    Application: Premiere Pro (Beta) v23.4.0.10    OS: macOS v11.7.3, RAM: 16.00 GB GB, CPUs (logical): 4

White end triangle disappears when adding transtion This has been reported quite some time ago.

When I edit everything works normal, but if I try to go to export window, premiere pro stops responding and go back to edit. If I tried one more time than it crashed fully.

With adobe media encoder I noticed that rendering dv avi to SD h264 or mpeg takes much longer time then expected.This happens both with beta and the released version.When you drop an dv.avi in the AMCand set output h264 match source rendering pauses quite often.Cc2019 is much faster! Steps to repro,Drop an 10 minute DV avi Pal SD interlaced in the AMC.Set match source high q h264.Start rendering.Result rendering does not go at full speed to the end, it pauses quite often.It does not matter if you dissable cuda.

Just tested in v23.6 beta - the proxies relink bug is still there (i.e. where opening a project prompts to relink proxies, but clicking cancel shows that they are in fact linked).To replicate:Production containing:Rushes project with 1 clip, proxy created.Edit project with 1 sequence - with just the clip from the rushes project in it.a. move proxy media to different locationb. open rushes project within production and relink proxy via relink dialogue promptc. save and close rushes projectd. open rushes project - it will prompt to relink proxy - click cancele. proxy *is* linkedthis repeats every time you open the rushes project.Rushes project must be open at same time as edit project for links to propagate.If you open the edit project, with the rushes project open, it will ask you to relink, click cancel and the proxy will be linked. If you *save* the edit project it will still ask to relink every time but clicking cancel will bypass that and the proxy will be linked.Possible workaround

Over-wrote original file when exporting (did not get a warning) 23.6.0 Beta (build 48) Mac OS 14.4.1 M2 MAC Studio Ulta 128GB Ram Here was the process:Marked in and out points on the source clip.Dragged to the timeline to create a matching sequence (which named the sequence after the clip ...as expected)(A sequence had not been created yet - so it was the blank region.)Added clips and filters to the sequenceExported using the quick export function, which I customized under more presets to QuickTime ProResHQSelected the same folder as the source media as I planned to bring this clip back into the project.And hit export.(Granted this is not a proper editing procedure as I should have renamed the exported file and put it in a new folder of modified media.  But I was just running testing out the new beta release.)After the export, a series of errors popped up about corrupted frames. All media disappeared from my Project panel and the clips though still in the timeline did no

Hello, It appears that the function to show different keyframe types is broken in the Premiere 23.6 (build 46) beta on an Apple Silicon Mac running Ventura. I cannot switch between different keyframe types to control automation in submixes in my timeline (i.e. cannot switch between balance, mute and volume.) This functionality works fine for regular audio tracks by right clicking on the automation line and choosing the desired property. This function also works in the last official release for Premiere Pro 2023.  I was able to reproduce this problem creating fresh projects in Premiere 23.6 (build 46). I have attached a screenshot of the menu that is not functional. Thank you for reading this.

Since updating the last premiere pro beta update, my scene edit detection will not work anymore. It just shows the loading bar and never moves.  

Alt dragged  a few graphics (text: Bima Suci) and changed the text. Image on timeline does not get updated with new name.    

Having updated from b32 to b44, which does fix the multicam issue, things are much slower for me in the timeline doing things like moving the edges of clips or audio. It's like it's taking a moment to think about it before committing, where it wasn't before.

I am seeing instances of multicam clips in timelines where I've set it to say angle 2 and then I come back to it (possibly after a restart) and it's on 1 say. Actually it does seem to always change to camera 1.Premiere is changing the angle without my intervention. I've seen this on multiple timelines Pr beta 23.6.0.32Large ProductionAlso, when I fix them - like just now I put a MC instance to angle 4, saved. On restarting Pr, it was back at 1, so it didn't stick. Same thing for just closing and re-opening the project without closing the whole production.I've also tried reverting to non-beta 23.5 and it won't even playback some of my wav audio so that feels like a no-go, so I'm a bit stuck. On further analysis, every file says pending when I open the production in 23.5 and it seems to be wanting to make a new .ims file in C:\Users\[username]\AppData\Roaming\Adobe\Common\Media Cache Files for each file, which in my case would be a long wait on a big documentary like this.