Camera Raw

I created a new profile for a Canon 6D using the Adobe DNG Profile Editor, and saved it in the Adobe\CameraRaw\CameraProfiles\Camera\Canon EOS 6Ddirectory (which already had the normal five Adobe Profiles). I noticed that the new profile is 325KB, while the normal ones are 272KB.Camera Raw (version 8.4.1.200) does not recognize/display the new profile in the Camera Calibration tab.  Any suggestions?

Hi, can someone help...?Every time I try to open a RAW file (CR2 files, tried multiple files they can be read fine on my book pro so aren't corrupted) I get the error "can't complete the operation due to a disk error". The only way I can edit files is by going through Lightroom first but this is not compatible with my workflow.I'm Running an iMAC 27 5k (2017) with 8GB RAM and 4GB GPU (High Sierra 10.13.3)As I say it works on my MacBook Pro with the same files.Any ideas on how to fix this?

I converted D810 NEF files to DNG and discovered that the histograms of the two (unedited) files do not agree.  Here are the Photoshop histograms; the left is the original NEF file, the right is the converted DNG.  Any explanation ?

Dear all,my macbook crashed last week and after many days of reformatting and reloading software, I also loaded my CS5 programs again from the disk. I had in my ACR Jack Davis' presets that I had downloaded from On1 website. Unfortunately On1 now still offers ACR presets but only for CS6 and CC versions. These do not work on the 2010 based ACR. Could anyone point me to CS5 ACR presets (I cannot find these anywhere anymore on internet) or could share these presets with me?Thanks in advance.

Hi everyone, I did changes in raw, in photoshop, once I put it in a folder to run batch actions on it, it doesn't pull the changes I made through?Some of the files are from our new Nikon 750.  Using CC 2017 and MAC.Anyone has a solution for me?

I had a graphics card failure on my MacBook Pro and had to reinstall my system (10.9.5) and reinstall Adobe CS 6. Now when I try to open a RAW file I get a message:-"Photoshop cannot open this file.If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw update installed via Help > Update..... If the problem persists, visit the following link for more information:http://www.adobe.com/go/kb407111"I've tried installing Adobe DNG Convertor but it doesn't run on OSX10.9.5. I don't want to update the System because I've read CS6 won't run on Systems above 10.9.5. Does anyone have a solution?Cheers MichaelVE

When I edit an image I usually make general adjustments (white balance, exposure, etc) in ACR first and then open as a smart object in Photoshop to do local adjustments such as cloning and healing. Having opened as a smart object, I can open the image up again in ACR and make further adjustments if needed. However, if I have already done cloning and healing on the image, when I make adjustments in ACR the cloning and healing I've done in Photoshop doesn't "adjust" accordingly (when I open it back up in Photoshop again). If that makes sense. What happens is parts of the image  don't look right because they've been adjusted according to how the image was when I first opened the object and not how it is since making further edits in ACR. My question is: is there any way to adjust the cloning and healing that I have done to fit with the new adjustments made in ACR (eg adjustments to exposure)???

Guten Abend,seit ein paar Tagen habe ich das Problem, dass ich meine NEF Dateien nicht mehr öffnen kann, Update arbeitet nicht ( Nikon 610 ). Kann ich das über die Kameraeinstellungen beeinflussen oder hängt es mit PS CS5 zusammen?

Hi Everyone,I've scoured the forums for past tips on how to troubleshoot Ps CC 2018 not opening some of my NEF files. I updated my video card drivers, uninstalled Photoshop and all preferences, restarted my computer, then reinstalled. I have ACR 10.1 installed.The weird thing is, sometimes it's fine and I can open and edit my NEF files. Even this morning, I was opening them just fine but now I can't get any of them to open. I didn't change any settings that I'm aware of that would have caused the problem (until I started troubleshooting).Any ideas?

Bonjour, en possession de cs6 et lightroom 5.6, je ne peut ouvrir les raw de mon sony 99ii ni avec bridge, ni camera raw, ni avec lightroom. J'ai éffectué la mise à jour camera raw 9.1 comme préconisé sur le site adobe mais en vain.merci de votre aide.Joël

Hi everyone! I am having trouble opening my D850 RAW files in Photoshop CS6. I have installed all of the updates with no improvement. I am trying to open a few "photos as layers in Photoshop."Do I need to convert them to DNG files?Thanks you for any help!

Wenn ich im Camera RAW ein Datei (NEF / CR2...) öffne, und versuche, das Bild zu bearbeiten (z.B. den Schärferegler verschiebe) bricht das Bild im Vorschaufenster ständig zusammen, flackert auf oder wird kurz falsch dargestellt (siehe Beispielfoto). Es betrifft nur das Vorschaubild. Menüs und Rahmen usw. flackern nicht.Die GPU-Beschleunigung ist aktiv. Schalte ich die GPU-Beschleunigung aus, tritt dieser Effekt nicht mehr auf. Die GPU-Beschleunigung wird aber dringend benötigt, da die Vorschau sonst zu unpräzise und langsam ist.Das Phänomen kann ich an verschiedenen PCs (Windows 7 pro 64) mit verschiedenen nVIDIA Karten (GT1030, GTX660, GTX970, GT640) beobachten.Habe bereits alle nVIDIA-Treiber vom neuesten 391.01 bis zurück zur 384er Version probiert. Das Problem lässt sich dadurch nicht lösen.Es tritt auch nur im RAW Bearbeitungsfenster auf. im Photoshop selbst (nach dem das Bild importiert wurde) läuft alles sauber.Alle aktuellen Update (Adobe / Windows / Treiber usw.) sind installi

i'll try update or downgrade gpu driver/camera raw version/photoshop, but still like this... ;-;

HI!I got lots of presets from VSCO. They are all here in my presets section in camera raw. To apply them, I have to click them manually with my mouse which takes too much time. Is there a faster way to go through them? I would be perfect to do that with my arrow up and arrow down keys. Unfortunatelly that doesn't work.Thanks a lot for helping out.

Anyone else have this issue?  Even when I select "enable profile corrections" it won't even pick my camera, which it did with no issues a few days ago.  Restarted, checked for updates, still not working.  Quite a few Nikon lenses are missing from the profiles.  Please help!!!

I've re-built my Mac OS Sierra and reinstalled CS6, with serial number to license the product. All is fine, except, I cannot 'update' camera RAW plugin, so raw images will not open.But the images do not open in raw/ photoshop. The macbook, OS, CS6, and digital camera are all the same - no changes.I just wanted to rebuild my Mac to clean it up.I have tried to run 'help-updates' to update the raw pluginI have then successfully installed the separate 9.11 camera raw plugin Camera Raw plug-in installerBut I still get the same error when trying to open a file. According to Adobe website page on this link, the CS6 installer should be compatible with OS10.12 (Sierra) which is what I have.Can anyone help?

Hi, Canon lens corrections data on camera are recognized by ACR? I shoot on RAW files with Lens Correction Peripheral illumin and Chromatic aberration enabled on the camera, there is no information from Canon if that data are registered on raw files or only on jpg. I am using a EOS 80D and wondering if ACR recognize lens correction on data all ready applied on camera and i am over correcting when in ACR Lens Corrections menu I applied "Remove Chromatic aberration" and "Enable Profile Corrections".

Have Bridge CC (8.0.1.282 x64).  In camera raw I'm missing the manual tab in the lens corrections.  Can anyone help me get the tab to show?

I recently had to re-install all programs on my PC, hence I have, I believe the latest versions of CC (19.1.1) and ACR (10.2.1.895).It's a bit of a nightmare restoring all your preferences and settings, and one I can't manage to get right means that JPEGs opened with the ACR filter in Photoshop have a distinctly more saturated (redder) tone than the Photoshop image. (I use the ACR filter as a simple, do-everything correction tool for JPEG snaps - my RAW files seem better, but still not identical.)For the purposes of the jpegs, I have set the colour space to sRGB in PS, although the version of ACR which opens when I use the Filter>ACR option gas no link for ACR settings at the bottom, just "cancel" and "OK" buttons, so no way of seeing what the settings in ACR area.Obviously I am missing something - it's so long since I have had to alter any of my PS workflow that I'm at a bit of a loss. I'm not that experienced beyond fairly basic PS use, so if you have any idea what IO am doing wro

I have this terrible problem 4 days now: Adjustment brush is not working in Camera Raw 10.2I have this problem since the last actualization.I downloaded the zip file for Camera Raw as told in the forums, update Camera Raw with that file (otherwise It was already updated sin the last update), contact the local customer support, contact the remote asistance support, received an email, did what the email said and still not working. Is the second time I have to contact Adobe support for main problems since I use an Asus Zenbook. I don't know what it is. I use the suscription Adobe Photoshop service and Windos OS and I have more problems than people that use Mac OS with a non suscription service. Please, HELP. I work with this. Each day I delay in my work I'm loosing precious time. If I don't work, I can't pay, and if I can't pay and the pay suscription doesn't work, well,, unfortunately Adobe is pushing me to the illegal. Please. Help. 

When i was editing in Adobe Premiere Pro CC 2018, I was trying to import Canon RAW files but when I pressed import, those pictures were not there but they were in my computer(I was trying to make a hyperlapse but I do not have lightroom so I wanted to select all the images and select image sequence to make it)Can anyone help me with Premiere Pro CC 2018 not accepting my Canon RAW files(CR2)?

I have a few questions regarding the Adobe DNG SDK and if i am using it correctly.So the flow of my program works as follows: i read a custom binary file containing the raw data.This will be the buffer of my output DNG. I can open the produced DNG in the windows preview correctly andalso in Adobe Photoshop, but if I want to open it in some other programs like LibRaw or RawTherapee, the imageis just completely black.I will post my programm and the log of DNGValidate.exe , perhaps you have an idea what went wrong.Here is a link of my DNG. See my program below#include "DNGWriter.h"namespace Unpacker {dng_error_code CDNGWriter::writeDNG(byte *pFrame, const std::string &fileName) {try {m_pDngImage.Reset(m_dngHost.Make_dng_image(m_imageRect, 1, m_depth == 8 ? ttByte : ttShort));m_dngBuffer.fArea = m_imageRect;m_dngBuffer.fPlane = 0;m_dngBuffer.fPlanes = 1;m_dngBuffer.fRowStep = m_dngBuffer.fPlanes * m_imageRect.W();m_dngBuffer.fColStep = m_dngBuffer.fPlanes;m_dngBuffer.fPlaneStep = 1;m_d

I've been using photoshop for some time now to edit and correct photos that I shoot with my camera but only now I noticed that if I open them with Photoshop, it is opened first in the Camera RAW plugin but is not using the flat image profile that I use when shooting photos.Instead Camera RAW uses a image profile that is similar to a photo without a flat profile.Is this normal? Could it be because of the .ARW Raw file format from Sony?I shoot with the Sony a68, I use the Neutral image profile with -3 on sharpness, saturation and contrast, D-range optimizer on 5 so I have lots of "information" to work with, and I use Photoshop CC 2017 and Camera RAW 9.6.

When making adjustments to raw or jpeg photos in CR I frequently get a typical as shown in attached. I have memory usage at about 19.5 MB.

Hi i bought Lightroom 6 (disk) and it opened my Fuji RAF files from my XE2.  I have since upgraded to XT2 and Lightroom 6 does not open the RAF files.  I don't want to change to DNG files. Is there anyway that I can upgrade without paying a subscription?Thanks