Feature Requests

I would like to suggest an enhancement to the alignment tools. Currently, objects can be aligned to the page edges, but for print design workflows it is often more important to align elements relative to the bleed area.It would be extremely useful to have the option to align objects, nodes, and vertices directly to the bleed boundaries, similar to the existing page alignment functionality. This would significantly speed up print-ready artwork preparation, especially when working with backgrounds, full-bleed graphics, and other elements that need to extend precisely to the bleed line.Suggested options:Align to left / right / top / bottom bleed edge. Extend or fit an object to the bleed area. Snap nodes and vertices to bleed boundaries. Allow users to choose the alignment reference: Page / Bleed Area.For print designers, this would be a major workflow improvement, eliminating many repetitive manual adjustments that currently have to be performed on nearly every print project.

Una herramienta tan potente como la que tiene Figma como las Guías de disposición se echa en falta en illustrator. Y también como la herramienta de crear otro tipo de retícula isométricas como affinity 

el uso de impresiones sobre shirts con DTF. en grandes dimensiones lo hace muy pesado , por lo tanto el uso del efecto semitono se hace necesario tenerlo en un solo lugar de diseño 

Many times I find myself wanting to move an anchor point on a curved path to a different part of it without affecting my current curvature, but it’s just not possible so I have to redraw the curve every time, which could be a little frustrating at times.It would be very helpful to have an anchor point sliding function in Illustrator where the handle tangents of the sliding anchor point adjust based on how close or far it is from the anchor point before and after it, like in 3D softwares. I hope it makes sense.

las herramienta es para colocar dos imagnenes o vectores en dos capas y que la que esta sobre la otra se pueda hacer tranparente en el  area que el diseñador quiera. , en el centro , de arriba hacia abajo , de extremo a extremo .  

I rarely hyphenate in illustrator. Turn it off by default

I’d previously reported a bug along these lines for the release version of Ai, but I’m not sure if that feeds through to the beta version too, so here goes:I have a document whose scale is 1:200. I have set the scale in the Dimension Tool Options to 1:200, and I can use the lovely Dimension Tool to happily add dimensions to anything and it gives an accurate dimension. Nice.I want to get the area of certain parts (it’s a garden layout and I want to be able to figure out how many paving slabs etc. to order). Sadly there’s not an ‘area’ option in the Dimension Tool, so I have to resort to the ancient Measure Tool. Why have these two tools not been merged?? Isn’t it time to add features to the Dimension Tool and kill of the Measure Tool? Anyway…If, using the (useless) Measure Tool, I try to get the length of something, it gives some figure based on nothing useful nor relevant. There is no way to set the scale of the Measure Tool, so we’ll politely ignore this. If, however, I want to get th

The title says it all. 

For those of us who want to use the aps for what they were originally designed for, versions of every Adobe ap with all AI features removed. 

The only way to unlock an object is by clicking the lock icon on it.I think we should add a shortcut for unlocking selected objects as an alternative option.

The Hand tool reaches its limits when the mouse cursor touches the edge of the screen. On a fairly large workspace, this forces you to zoom out and re-centre to avoid scrolling for too long. In Blender, there is no limit; you can scroll indefinitely. The only limit is physical: the mouse touches the wall or moves off the desktop. It may not seem like much, but for someone looking to optimise their working time, it makes a difference.  L’outil Main atteint ses limites quand le curseur de la souris touche le bord de l’écran. Sur un espace de travail assez grand cela oblige à dézoomer et recentrer afin d’éviter de scroll trop longtemps. Dans Blender, il n’y a pas de limite, on peut défiler à l’infini, la seule limite est physique, c’est la souris qui touche le mur ou sort du bureau. Ca n’a l’air de rien mais pour quelqu’un qui veut optimiser son temps de travail, ca compte. 

I use the Blob Brush to outline the shape of a fill but then have to delete the floating vertices inside of the shape, it would be nice to have a checkbox in the Blob Brush Tool Options that removed/undid any Compound Paths. That way you can stop interrupting your Blob Tool brushing to delete the hollow center, so to speak. In this example, I’m using the Blob tool to create a cell that will eventually be a shadow. I would like the Blob Tool to have an option that releases the compound path after de-selection and remove the inside path. This would alleviate the need to deselect, use the Direct select tool to delete the inside vertices, and would let an artist continue using the Blob Tool without having to interrupt the workflow. Procreate doesn’t even do this yet.  

 add "show linked images filter " in links window options , Because we need it to embed all images for the final file 

The 3D feature offered today in Illustrator is great, however, it’s very limiting. Packaging Designer are not 3D designers and learning/using expensive modeling software is not practical. If the 3D feature in Illustrator can be expanded to model slightly more complex objects, like asymmetrical packaging components, will be extremely valuable for our industry.Thank you for listening,

wenn ein Dokument über 100 oder mehr Zeichenflächen verfügt, wäre es sehr hilfreich, wenn man die Namen der Zeichenfläche durchsuchen könnte um seine gewünschten Elemente schneller wieder zu finden.

I want to be able to flip my cursor or change it’s style 

As seen in “New Alignment Example.png” and “Irregular Alignment Examples.png”, a user would set a key object, and the source rectangles of the remaining selected objects would align their adjacent edges to the key object’s source rectangle edge.  

A programme just like the new Affinity - where vector and raster are supported and there’s no need to jump from one app to another for each project, with Adobe’s most powerful tools, would be amazing and helpful to so many creatives.

I am a university teacher which uses Illustrator for live lectures, where I scribble and draw a lot of graphics and formulas (I teach physics). Illustrator provides me with an excellent tool for the job, as I can mix graphics and images to create very effective slides live, while talking to the student.To achieve better communication, I uses different colors to identify different part of the equations and drawings (e.g. forces, speeds, etc...). It would make it much easier if it were possible to program the stylus button to cycle trough a programmable set of colors, or tools, or brushes.This would allow, for example, to preset a palette of colors, as well as a set of tools like select, brush, line, and circle, covering the entire need for a lesson, making them accessible by simply pushing on the pen buttons. Ideally, side button would cycle one set (e.g. colors), and the top button the other set (e.g. tools). But this is just an example, the idea could cover many more scenarios.This sh

para o turnable, existir a opção de gerar a partir de um desenho de frente e outro lateral.Assim as proporções em outros ângulos ficam mais exatas.

Layer organization is one of the most cumbersome things in Illustrator. I'd like to be able to select a target layer to paste into from another document. It also shouldn't force you to put it into a layer that you purposely locked or not paste it in at all.Also, when I select a layer (with A or V tool) already in the document, I'd like it to open/highlight in the layers panel, so I don't have to scroll forever, looking for a tiny dot, to find it.  

It would be great if (somehow) that small green and red indicator could be implemented in illustrator. while working you can glance down and see red and know right away that something is wrong. click on it to see what is wrong.  a font missing error, overset text in a text box, linked file missing etc. 

It would be helpful to include rulers in outline mode. They currently dissapear when view changed to outline. 

There are 50 shades of grey for the user interface in adobe illustrator but a realy dark version or even a pitch black version is missing.Make that happen please.

HI! It would be really useful to have an option outside Preferences panel (may be close to SHOW GRIDS icon?) that would allow us to switch between having GRIDS IN FRONT or IN BACK since people who use GRIDS need to have them IN FRONT while designing, but sometimes we need them to be IN BACK just not to annoy us and we have to be constantly going into PREFERENCES panel, then going to GUIDES & GRID and activating or deactivating this option. GRIDS are a great and useful way to design logos and I'm sure all of us who are dedicated to this would be eternally grateful.