Lightroom Classic

Que esta pasando y como lo puedo solucionar.Ya desinstale e instalé Lightroom. Ya hice lo mismo con el controlador de la tarjeta gráfica. Ya actualicé mi Windows. Ya no sé qué más puede ser.

Hello, I recently noticed when scanning some 120 negatives with my v600 & Silver Fast 9 the DNG files do not properly import to my LrC catalog. I scan them as 48bit/16bit raw dng files to convert in LrC with the Negative Lab plug in. I have done this for a few years now and never had an issue until yesterday when importing some scans.  LrC will set up a preview of the file but won't show a numerical presence in the side menu. Any ideas?  

Good morning all. My first time posting on this forum so please be kind. I have been using Sony XQD cards (64GB and 240GB) G Type cards for some time now and frequently experience import failures when attempting to import into LrC. This does not happen all the time, perhaps 2 out of 10 imports but I have not recorded the failure rate. I (mostly) always format my cards in camera before a shoot, but this does not seem to reduce the occurences of a failed import. I use Nikon D850, D500 and Z6II cameras. The choice of camera does not seem to have a bearing on when a failure occurs.When I begin an import the card appears to be read OK, and generates the image thumbnails in the import window. I then set my destination folder, create my keywords, and press IMPORT. I then get an Import Results pop-up window stating; "Some import operations were not performed" - Could not copy a file to the destination folder because it is not writable or there is not enough free space (xx - numb

I have used Lightroom for years and have always converted RAW files upon import to DNG with upper case file extension. After upgrading to LR CC, however, all of my files are imported and converted to DNG with the lower case .dng extension. Preferences in Edit and Import are still checked to upper case. I still have LR 5.7 installed on my system and it still correctly uses the upper case .DNG file extension, so this is apparently another bug with LR CC. Not a serious issue, but annoying nonetheless.

After importing images and when I go to the Develop module it onlt shows changes to the Preview image not the main image on screen.  Using Lightroom Classic CC v7.5

This problem is driving me crazy. I rate portraits with stars on my camera (Canon R6). The stars appear on the camera display, but when I import the photos into Lightroom, the stars disappear.I've already checked the box in the Metadata section. I've also unchecked it, but the stars seem to no longer be imported. I'm not sure if it could be an update. It worked perfectly before, and I didn't change anything.I'm using a memory card reader. I would really appreciate it in advance if anyone could help me.

In my LrC catalogue I have my images organized in a logical hierarchy consisting of a root collection, collections, sub-collections, sub-sub-collections and albums, e.g.:AlbumAlbum > Year 1990...Album > Year 2022Album > Year 2022 > Travel to PeruAlbum > Year 2022 > Travel to Peru > Location 1Album > Year 2022 > Travel to Peru > Location 2Album > Year 2022 > Travel to Peru > Location 3Album > Year 2023Album > Year 2024 Only Location 1, Location 2 and Location 3 are actual albums. Album is my root collection. The years (e.g. Year 2022) are sub-collections in the root collection, and Travel to Peru is a sub-sub-collection in the sub-collection Year 2022. This is a logical collection structure inside my LrC catalogue and not the same as the physical folder structure on my computer. I know that the migration will convert collections into folders and albums into albums - but does the migration understand and migrate this 4-tier-hierarchy

I would like to export my edited RAW images to jpg files while keeping the date and time that they were taken.I recently switched to a windows computer, I never had this problem before whilst using a macbook.  Are there any settings that I should change so the date of the jpg isn't the date that I exported the image?

But other upgraded catalogues can. Plus I can create a new catalogue and access the images perfectly happily. All the files are on the same hard drive in the same location they have been forever. If I try and see the original file I get this:Then when I try to loacate the files I get this.This is my main catalogue with 71,000 images in - It was working fine with previous versions of Lightroom Classic until I updated the app. Anybody have any suggestions? Thanks

Hi, Is it possible to rename files by inserting in the file name the name of the people present in the photo identified via facial recognition?Thank you

Hi guys, If I apply a preset in lightroom and make my adjustments, and then right click and edit in photoshop all worked great. I saved the image and the edited copy shows up in lightroom like normal.I haven't changed any settings, but now once I save the image in photoshop, the copy shows up in lightroom BUT it is re-applying the same preset again over the photoshop edited image? I have checked the lightroom import settings just incase, and have reset Photoshop preferences.It doesn't make a difference how I save and exit photoshop, the same thing happens. Is there a setting I have missed?  Lightroom Classic v13.4Photoshop v25.11.0

Lightroom CC : Pourquoi lorsque je fais un masque pour un éclairage d'apoint (pinceau, dégradé linéaire...) c'est la photo toute entière qui change d’éclairage et non pas la partie sélecitionnée ? 

See: https://community.adobe.com/t5/camera-raw-ideas/camera-raw-tone-curve-as-local-adjustment/idi-p/12221231   Local adjustments in Camera Raw now feature Tone Curves as one of the settings. If you want to try out the Tone Cover as a Local Adjustment check out the latest updates from Camera Raw.     

For whatever reason attempting to Ai Denoise in PS or importing a lot of files to LrC makes the software crash. The computer itself stays running. If i relaunch LrC it appears to have imported *some* files but not many. All drivers are up to date. Windows is up to date. Full Adobe suite is up to date. I've even attempted uninstalling and reinstalling PS. System is an i9 14900k, 192gb ddr5, asus 4090. Crash logs submitted when it allows me to. Sometimes it crashes without a prompt for submission.

Quando estou na aba Revelação do Lightroom para tratar as fotos, as fotos não aparecem onde deveria, fica em uma "janela" que sobrepõe parte da tela e que é muito pequena tornando o trabalho inviável. 

Hello. I updated to LR 12 classic this morning. After it converted my catalog, it crashed stating that the catalog was corrupt. It then repaired it. It then crashed again, stating that the catalog was corrupt.   The first corrupt catalog is 1.6GB. The second is 1.2GB.   It then repaired it again. This final catalog is 300MB and contains zero history. The photos are in their last edited state, but I can not go back to previous steps nor copy settings to another file.

Since upgrading to Lightroom Classic 13.3, the performance has become extremely slow. Various operations have become very slow; for example, it takes about a minute to move to the Develop module or to move between images in the Develop module. There were no issues when using Lightroom Classic 13.2. Is there anyone else experiencing a similar issue? I have about 200,000 images in my catalog, so that might be one of the reasons, but since it was working fine with version 13.2, I suspect that there might be some degradation associated with upgrading to 13.3. CPU:AMD Ryzen 9 5900X GPU:GeForce RTX 4070 Ti RAM:64GB storage:2TB SSD x2 (15GB+ available for each drive) Below is the system information: Lightroom Classic version: 13.3 [ 202405092057-40441e28 ] License: Creative Cloud Language setting: en Operating system: Windows 10 - Business Edition Version: 10.0.19045 Application architecture: x64 System architecture: x64 Logical processor count: 24 Processor speed: 3.6GHz SqLite Version:

Hallo, Ich habe das Problem, dass Lightroom Classic Version 13.4 (Camera RAW Version 16.4) beim KI Entrauschen von .arw Dateien (Sony) mit unbekannter Fehler abstürzt ( Screenshot.png) bzw., dass ich KI Entrauschen auf .arw Dateien nicht anwenden kann. Es wird auch kein Vorschaubild erstellt (Screenshot2.png). Mit .raf (Fuji) hat das KI Entrauschen hingegen kein Problem.  Ich benutze einen Windows 10 Rechner Kann mir jemand bei der Behebung des Fehlers helfen? Danke schonmal Enrico

Bonjour, je me permets de vous contacter. J'ai déplacé l'ensemble des éléments du catalogue de mon disque dur de mon Mac vers un  cloud j'ai bien cliqué sur le fichier qui permet d'ouvrir le catalogue lorsque celui-ci était dans le cloud et cela n'a pas permis de démarrer Lightroom, j'ai de nouveau réessayer d'ouvrir le même catalogue qui était encore stocké sur le MAC et la impossible de lancer l'application. J'ai fini par désinstaller LrC pour réinstaller de nouveau LrC, mais le phénomène persiste et je ne suis plus dans la capacité de pouvoir réouvrir mon Lightroom Classic sur le Mac. J'ai réessayé avec d'autres catalogues qui se situe sur un disque dur externe, et j'ai le même problème. Merci par avance pour votre aide Bien cordialement Michel

Hello,I have an issue when copying a preset to other photos. When I edit the colors on one photo and try to copy the color profile to the remaining photos, the colors on the other photos get distorted and do not match the same style. However, if I copy the photo using the LOUPEDECK device, it works fine. Can you please help me understand what the problem might be?

Hi everybody, after Update of LR Classic and catalog cannot fisnish syncronaization. I have 60k pictures an the cloud, the sync error is not new. Usually I see in the Settings "Lightroom Synchronization" the sync process with file names. In the new version it showes nothing. I do not know wich file I  can remove and reimport. If I press option button (MacBook) and click on the item "show in the web", Safari opened LR in the web and show message 2 errors" Could you please explain how to trobleshoot in this case? BR, Leo

Hello!I have Adobe Lightroom Classic CC, and I have no problems synchronizing photos to their web service as albums. I have no problems adding one of those albums from  Lightroom to Adobe Portfolio. My problem is how to keep my Portfolio synchronized with my Adobe album. When I add an album to my portfolio it is fine, all the photos are there. When I add new photos to the album from Lightroom the next day, the new photos don't show up in my Portfolio.How can I make sure they are always in sync?

Using the most up to date version of lightroom, I have been having touble opening a catalog on an external drive for some time.  I have tried many things, including buying a new external drive, swiching between windows and mac os etc.. normally the catalog would open after 1-2 tries, but now it wont open after more than 3 attempts.  Lightroom keeps loading, appear stuck on something and evetually crash.  The problem got worse after the most recent update that upgarding the catalog.  I am fairly sure it was due to the catalog but how to trouble shoot furhter?   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules. A ‘bug’ is not just another word for any problem with software!]

Hello there ! I'm trying to figure out how NOT to make a virtual copies of my pics in Lightroom CC, but how to create INDEPENDENT (and renamed) DUPLICATES of photos I could than treat as independent originals - as if they were different pics altogether. Until now, the only step I achieved is creating virtual copies of a photograph, but these copies are attached to the original, and that's not what I want (Am I being clear ?) Any ideas ? Cheers ! Poly  

Hi all, In Lightroom Classic, I have a Raw Default configured for my iPhone 15 Pro Max. It's a preset that applies Lens + CA Correction and enables HDR output (please see attached screenshot). For reasons that are unclear to me, Lightroom Classic does not apply this profile to ProRAW DNG files from my iPhone 15 Pro Max on import. For example, when switching to the Develop module on a freshly imported iPhone 15 Pro Max DNG, nothing in the Lens Corrections panel is enabled, and HDR output is off (please see attached screenshot). Have I misconfigured something? Is there a bug? Kind of stumped.