Lightroom Classic

When raw defaults are set to use a preset with HDR Mode: On, HDR mode doesn't get enabled for imported photos or when you reset the photos. But when you use the same preset as an import preset in Apply During Import, HDR mode gets properly set.   To reproduce on LR 13.4 / Mac OS 14.5:   1. Download and open this catalog: https://www.dropbox.com/s/zn2kykbodkwbtgo/HDR-raw-defaults-bug.2024.07.20.zip?dl=0   2. Import the preset HDR.xmp from the catalog folder. It sets Exposure = -1 and HDR.   3. Set Preferences > Presets > Global to the preset HDR. Uncheck Override Global Setting For Specific Cameras.   4. Right-click the subfolder "photos" and do Synchronize Folder, with the option Show Import Dialog Before Importing.   5. Click the import option Add and import the three photos.   6. Take each photo into Develop and observe that Exposure = -1 (correct) but HDR is not highlighted (incorrect). Click Reset and observe that HDR is still not highlighte

The behavior of "Sync another catalog" has dramatically changed recently (not sure when, but perhaps when the new sync architecture was introduced) and the new bavior has 4 major problems - I hope these are not "as designed" features. My observations and testing of this was done on July 22 and July 23, 2024 using Window/10 with LrC 13.3.1 and LR 7.4.1 This information is related to syncing a new catalog. It does not apply to changing the sync catalog to one that is a copy, backup or an upgrade of the currently synced catalog. Rather it applies to changing the sync catalog to a catalog, or copies of a catalog, that did not get its start from the currently synced catalog and this includes the scenario of creating a new catalog and then importing to it from the currently synced catalog. 1) All images from LR/Cloud are added to the LrC catalog and are placed in the Xfer Folder in the LrC Folders Panel (this the folder designated in the "Lightroom Sync" tab of the "Preference

I have been using Lightroom classic for years. reacently I started looking into its slideshow capabilities. I have created a collection of around 80 photos. When I press Preview or Play it goes through preparing the slides. It is a very slow process. I left it and went to dinner and came back after 3 hours and it was only at Slide 25. I started the process multiple times, rebooted Lightroom, rebooted my iMac, ... Same process. Takes hours to prepare the slides. I have yet to complete one slideshow.   Any idea what might be happening?

This is my last attempt to solve this before I do a clean install on Windows 10 (fingers crossed)My hardware: Intel i7 7700k - 32gb DDR4 3600Mhz - Nvidia Geforce 1050 2GB RAM - Samsung nmve 500GB for SO and Crucial P3 Plus for Catalog and caches.SO: Windows 10 v22H2 64bit, which I did a fresh install yesterday, keeping programs and data (not formatting).Graphic card: Nvidia Studio drivers, clean install yesterday with last version (16 of July-24)Lightroom Classis v13.4 and everything up to date.I know the hardware is little old but I'm sure is good enough to run Lr Classic smooth, as it did for a while.PROBLEM: I don't remember when this happened but was a while ago, Develop module went terribly slow, and the brush was impossible to use with 5 to 10 seconds of lag sometimes. I had to turn off the Graphic Processor and it improved a little bit (before this, graphic processor was on and everything was fine), no lag anymore but overall it feels slow, I click on the crop tool and it takes

First time poster, Recently my Lightroom Classic shuts down everytime my iMac (2019, macOS Sonoma 14.5) screen locks.  Is there any Apple setting that is causing this is this a Lightroom issue?  Please advise. Also note that it does not appear to be a crash since I do not get any prompts to submit a crash report. Thanks in advance,

I've got a catalog wth 500 images that I have pulaced into a custom order/arrangement. Is there any way to save this particular ordering? I want, for example, to resort the view based on a few things, such as file type of Added order, then return to the ordering I've created. Would a Smart Collection save the order, for example? (I don't want to try it to find out ;-)) Thanks for any help.

When I go to LRC (version 13.3) to import my raw images (shooting Nikon z8 in Raw HE, Prograde CF Express B 325GB Cobalt card, and Prograde CF Express and SD UHS II card reader PG 05.5) many but not all of the images are listed as "Preview unavailable for this file" Yet every image box is listed as nef. Operatings system is Wiondows 11.Has anyone encountered this before and if so any suggested remedies would be greatly appreciated. Bruce

Hi, community!  I am shooting photos with a Fujifilm/XT5 and having trouble importing the images to Lightroom Classic 6. I already checked that it´s updated -as updated as it can be. The Adobe agent told me they are not trained on this cause the product is not available now, and suggested I come to the Forums to see if someone knows about this.  Also, I tried the Cloud service last weekend and I wouldn´t say I liked it. It crashed all the time on my mobile.  

I have experienced instances with four albums now where some actions done to pics in LR Mobile on my iPad are not fully synced back to Lightroom Classic.  Here's the workflow and what has happened: 1) Pics initially imported from D850 to Lightroom Classic.2) Collections created in LR Classic and set to sync to Lightroom.3) Albums with all pics appear on iPad in LR as they should (as well as iPhone, cloud etc.).4) Albums are reviewed on iPad with certain pics flagged and/or star rated.5) LR iPad, LR iPhone, LR desktop (not Classic, the other one) and lightroom.adobe.com are all perfectly in sync right down to the pick, ratings, etc.5) The problem is that some of the flags and ratings changes properly sync back to Classic and some do not.  I can't really see a pattern.  Edits however done in LR mobile appear to sync but I only tested a few. This is a huge problem because now Classic is out of sync with the client's selection made on the iPad.  I do this a lo

Hi,I the main folder is not showing how many pictures are in the main folders.Like Lightroom Fotos 2023 0submap 01 0 submap 01/09 26How does this hapen can be resolved?   

I have recently had an issue with some of my RAW files where after the denoise process has completed, with the AI denoise, it says that there has been an unknown error with the file. However, this only happens with some files and not others but they are all CRaw files. I am on Windows and version 13 of lightroom. Some help would be much appreciated. 

I only use my lightroom 6.0 a few times a year and a few weeks back it didn't want to start.I reinstalled from the download from my Adobe account. But now the develop module is disabled.It first said I had to sign out and then in again. But now it wants me to sign in to the creative cloud. Which to my knowledge is subsricption based.The subsription based version is not something I want to buy with this little usage.Is there somehow I can get the develop module to work again as I had paid for?

I'm running a Macbook Pro 16" M1 Max (24 core GPU) with 64GB RAM. After updating to Lightroom Classic 13.0 - it's running REALLY slow - pasting settings from "Previous" for example, the pop-up window says "Estimated time: 1.0 seconds" but it actually takes between 2-5 seconds.Hovering over develop presets takes in excess of 10 seconds to change the preview of the main image.Moving between images in the filmstrip has become tediously slow... The last build of 12.x ran much faster... Hopefully it's something that'll be fixed in an update - is it running slow for anyone else?

Being somewhere in the Library module, I want a certain image to be show / active in the Develop module. The code below works as long as the image to be shown is in the grid.However, when the image is not in the active grid, then the Develop module reports "No photo selected".Even though if I go back to the grid and select "All photographs" in the left panel, the image is the selected image with the white border.The issue is that upon the start of this plug-in I want to show a specific image in the Develop module, however I have no glue which folder or collection is active at that moment. local function showInDevelopModule(photo) catalog:setSelectedPhotos(photo, {}) local moduleName = LrApplicationView.getCurrentModuleName() if (moduleName ~= "develop") then LrApplicationView.switchToModule("develop") end end LrFunctionContext.postAsyncTaskWithContext("test", function(context) local message = nil LrDialogs.attachErrorDialogToFunctionContext(context) local photo =

mon mac etant sous la version mojave 10.14.6 c est un mac book air reconditionné et je ne peux pas faire la mise a jour il lagué dans ce cas existe t il une version de ligthroom classic qui me permettrai de l utilisé  

Hello! I have a problem using the improve Tool in Lrc. I would like to know how to solve it. Please see attached photos for context. Do you think the problem is from the system or from my video board. Please help if you can.   --------   Lightroom Classic Version: 13.4 [202406181129-60d181b7]Licensor: Creative CloudLanguage Setting: PTOperating system: Windows 11 – Home Premium EditionVersion: 11.0.22631Application architecture: x64System architecture: x64   Graphics processor information:DirectX: NVIDIA GeForce RTX 3050 Laptop GPU (32.0.15.5612)Early stage: GPU for image processing supported by defaultUser Preference: GPU for Export Enabled.

I have installed and working LR classic 13.2.  The Creative Cloud app lists 13.3.1 as available update but is not compatible with my device. I have called Adobe several times each time getting different advice. My hardware is not the problem. My version of windows 10 is now (according to microsoft) the latest: (Version 22H2) build 19045  4529.  The last Adobe persion I talked to said I needed build 19090 but I don't know how to get it. Another Adobe person said I must upgrade to windows 11.  Please let me know if you have updated to the latest LR Classic version on WIn 10 and if so what is your build # for the OS.

There is a white border that appears around the photo ON MY SECONDARY DISPLAY. How do I make it go away?

Hi,  i hope someone can help me: I took concert photos and used the Denoise tool. The next day when I continued editing the tool was not working anymore and it said "Denoise is not currently compatible with this photo format."I have a Nikon and the raw format is NEF.  Before two days ago it always worked fine. Does someone know a solution to this problem? thanks a lot,Theresa

When attempting to implement a lens correction profile I get this:However the correct lens is shown in the metadata: Fujifilm XF50-140mmF2.8 P LM WR. Since this is not a built-in lens I assume the profile is missing.When I lens correct another Fuji lens it does find the correct lens profile. As in this case:In both cases it shows Built-in lens Profile applied. But, again, there is a discrepancy and neither are built-in lenses.How can I get the correct lens profile?  On Windows 11 Home Version 10.0.22631 Build 22631; Processor Intel(R) Core(TM) i7-10710U CPU @ 1.10GHz, 1608 Mhz, 6 Core(s); LrC 13.4 Camera Raw 16.4

My images are on EHD.  I bought a new MacBookPro.  Backup catalogue is on new device.  Images do not show up on new device.

Issue:When viewing videos in the library, if you watch a video that is longer than 8 seconds, and you switch to a new video while you're in the last 8 seconds (including if the video has ended or is paused), then the application will freeze for about 5 seconds before the new video is ready to play. Environment:Lightroom Classic Version Number: 13.4 ReleaseOS Version Number: Windows 11 Pro 10.0.22631 Build 22631 Repro rate: 100%Steps to reproduce:Create a video that's shorter than 8 seconds (call it A)Create a video longer than 8 seconds (say 20 seconds) (call it B)Play A then play BObserve there is no freezePlay B then play AObserve the freezePlay B for fewer than 12 seconds then play A (with or without pausing)Observe there is no freezePlay B for more than 12 seconds then play A (with or without pausing)Observe the freeze Expected result: smooth switching regardless of position in current videoActual result: application freeze dependent on position in current video

I can not select the watermark during export??  They are there, but it is not highlighted to select. I can go into and edit the watermarks so I know they are there but during export I no longer have an option to use it.  I have the latest update and everything else seems to be working ok. I am at a loss! 

Hallo, kann mir Jemand erklären, wieso mir in der Creative Suite kein Update auf Lightroom Classic 13 angeboten wird? Die letzte Version is 12.4. Mehr steht dort nicht? Danke.

BonjourDepuis quelques jour l export en JPG présente des échecs de plus en plus nombreux: 4 échecs sur un lot de 10 par exemple. Aujourd 'hui même 1 seule photo exportée d'un  NEF en JPG 1920X1080 est en échec.Je fais mes exports comme je les ai toujours faits et réussis.Maintenant il devient urgent de trouver une solution: quelqu un peut il me sortir de ce mauvais pas OU EST CE UN BUG?Merci