Premiere Elements

In the previous version of elements I was using you were able to see the video you were editing frame by frame in the timeline. In elements 15 the video in the timeline is a solid blue rectangle. (Expert view). How do I see a frame by frame depiction of the video being edited in the timeline? Getting rid the of the frame by frame view can't be an enhancement. What am I doing wrong? TIA.

Beim laden von Videomaterial von der Kamera hat das Programm zahlreiche Dateien angelegt. Es ist aber nicht in der Lage diese en Bloc in die Filmbearbeitung zu übernehmen. Es handelt sich um eine Datenmenge von gut 13 GB. Es ist fast unmöglich jede Minidatei einzeln manuell zu übertragen, das würde Tage dauern. Mit kleineren Filmen war es bisher unproblemtisch, als ganzes in die Verarbeitung zu laden. Wer kenn sich aus?@

I have some footage shot indoor with insufficient lighting so that the transition from day to night causes a gradual color shift that ends up needing correction.What I would like to do to apply the correction gradually during the transition from day to night is:     1 add one adjustment layer and apply the 3 adjustments that get me where i want to be (rgb color, lighting and temp/tint).    2 adjust the opacity of the single adjustment layer created in step 1 using keyframes during the transition from day to night. IE, the correction is not applied at all during the beginning (full daylight) because opacity is 0%, and the correction is fully applied by nighttime - 100% opacity. I would expect this to work, but it doesn't. Instead I must add a separate adjustment layer for each of the 3 adjustments and create the same set of keyframes during  transition from day to night for each.This works, but is substantially more work to set up, and the rendering ti

Organizer is unable to load a .mov file shot with my iPhone6. Get the error that "the selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed." This is a new error, as I've used organizer fine in the past. However, I can load and view the video on my computer (not using Organizer), and if I transfer the video into premiere elements video editor, the movie plays in the timeline just fine. Someone help? I'm using Premiere Elements 15. Have updated quick time player (verion 7.7.9). Any thoughts?

HiLooked in curiosity what price for upgrade to PRE2018 would be.Site tell $70 - but looking at exchange rate to SEK 795 - this is horrible?This is plus VAT 25% after that.Exhange rate is 8.45 SEK each US$ now, a week ago it was below 8.00 SEK.What you get in store is paying 11.35 SEK each US$.Even looking upgrade license 652 SEK this is 10% above exhange rate.Seems to me the 30% off does not come into Adobe Store???Is there a way to see charge in US$ in store - and actually charge in US$ and let my bank FOREX exchange that on my Visa?Looks like 25% VAT is added twice or something.Take full license 795 kr + VAT 198.75=993.75Thanks.

I have some old film movies that I had transferred to DVDs in a .mov format.  I have loaded one of the DVDs into Premier Elements 2018 and I would like to be able to cut sections out of this video and start a new project with this.  Is there a way to do that?  My other option would be to delete everything but the info I want and then save this as a new project, but this seems like more work.Thanks.

Hi I was wondering if anyone knows where I can get a upgrade key for premiere elements 15. I was looking to upgrade from my elements 14, but I don’t want elements 2018.

I have Steve Grisetti's Muvipix.com Guide to Photoshop Elements & Premiere Elements 13. In trying to boost the treble in the audio track for certain clips, however, I find his instructions woefully inadequate.  Here's the situation: I have a two-hour television music clip that I cut into four separate clips—a different artist in each clip. The audio in the first clip is OK, no changes needed.The audio in the remaining three clips needs high frequency boost, a different amount in each clip.Although Grisetti spells out the function of the sliders in the treble/bass adjustment panel, he doesn't indicate how to tell the program which clip should be adjusted.Where should the CTI be during this procedure?Should a clip that needs a treble adjustment be "selected" or highlighted?  If so, does the program know just to modify the selected clip and not the entire four clips?How do I know that the sound on a particular clip has been modified?  Is there a visual indicator somewhe

Heya,I accidentally held down ⌘W and my project has now completely disappeared and I have an empty workspace. I'm freaking out that I've lost hours of hard work. Can anyone please please help me?ThanksLouis

I was working on a video sequence yesterday and today for some reason I am unable to play/pause my timeline footage. I need to insert a few more clips into my project and would like to upload this project to youtube this afternoon if possible. The software updates are current and I everything was working fine yesterday. Please help asap. Thank you! I am using:Premiere Elements 14Acer Predator Helios 300Intel i7Nvidia Gforce GTX

Ich verwende Elem. 15 auf meinem Mac (Sierra).Nach Export eines erstellten Videos (Computer/4kUHD/MP4-XAVC-S hoch)erhalte ich leider nur getrennte Dateien: 1) m4v 2) Audio in aac und 3) eine (leere) mp4.Datei.Ich brauche auf meinem USB Stick für einen Oled UHD Fernseher aber natürlich eine Datei mit Ton!Bitte um Hilfe!

Ich verwende Elem. 15 auf meinem Mac (Sierra).Nach Export eines erstellten Videos (Computer/4kUHD/MP4-XAVC-S hoch)erhalte ich leider nur getrennte Dateien: 1) m4v 2) Audio in aac und 3) eine (leere) mp4.Datei.Ich brauche auf meinem USB Stick für einen Oled UHD Fernseher aber natürlich eine Datei mit Ton!Bitte um Hilfe!

Elements 15 (Mac Sierra), When I export a 4k Video  (Computer/4kUHD/MP4-XAVC-S high Quality) I only get 3 separate data:1) m4v  2) aac Audio  3) an empty MP4 dataOf course I need a video with audio for watching it on an Oled TV.Who had the same problem or has an idea about it?I would be very grateful for an answer!   Josef

Elements 15 (Mac Sierra), When I export a 4k Video  (Computer/4kUHD/MP4-XAVC-S high Quality) I only get 3 separate data:1) m4v  2) aac Audio  3) an empty MP4 dataOf course I need a video with audio for watching it on an Oled TV.Who had the same problem or has an idea about it?I would be very grateful for an answer!   Josef

Hello,the double click in the monitor panel to edit (for example to edit a title text) does not work.Simple course of action:Add title - standard text. In this moment I am able to edit the text and its optinos. Save it, okay so far.When I want to change the text later, I select the title.Usually I double click in the monitor panel so that the text options and the text itself can be edited. But nothing happens now.I had no problem with these actions with my old computer and Adobe Premiere Elements 13. Last week I got a new computer and started on this one with the new version. It is a HP ENVY – 17-ae006ng with NVIDIA GeForce 940MX. I already updated graphics driver with no effect. I also tried to reduce resolution, to use a second monitor, to start as administrator or to create a new project - all of these without effect.Who can help me?

What do I need and how do I convert Hi-8 so that I can import into Premier Elements 13?James Engles

PRE 12 and Windows 10. I am working on a movie consisting of numerous clips. I am editing one clip at a time, starting with a review of the entire clip, noting (using time) the areas that are candidates for trimming. Then I go back and review again, this time actually deciding and doing the trimming. The problem is that once I have trimmed at one point, all the other downstream times change, so I lose my time reference points for additional cuts.What I am trying to do does not seem unusual, so I suspect my method is at fault, since I am new to PRE. Advice would be most welcome. Thanks in advance.Ted

Hi. When I creaated a project in Premiere Elements 14, i mistakenly saved it to the wrong drive on my computer. I continued with the project and much later noticed my error. I saved my project to the correct drive and later thought that I could just move the preview files to the same location as the project files. I see that that was a mistake. Now I cant render the video files, but more importantly, when I try to export the completed project there is no sound. Preview files are missing. I tried copying the preview files from the new location back to the original location but it said that the file names were too long to move. They may not have moved accurately the first time. I belatedly see that preview files cant be moved. Is there a way to recreate my lost audio and video preview files? I cant render the project. The video seems to export ok but with no sound. I also mistakenly went into: edit, project settings, and tried to change the location of the preview files to the new projec

I am currently using Premiere Elements 2018 on Windows 7 Pro 64-bit.Here's my system specs:Motherboard: Gigabyte GA-Z97X-UD3H-BKCPU: Intel Celeron G1840 2.8GHzGPU: Gigabyte Windforce GTX 750 Ti 2GB VRAMRAM: 16GBThe problem that I keep getting is when I try to rending a video that's about 30 minutes in length and has another video overlayed on it, I get an error that just says; "Export Error". I tried cutting the video in half and the render worked fine, but when I tried the full 30 minute video again I got the same error that says "Export Error" again.I also want to note that I did render the timeline of both these videos before the actual render.Does anyone know what I can do to resolve this problem? Any help would be greatly appreciated. Thanks.

Why looks like the timeline has hide/lost frames sometimes? My screen capture shows three points from same timeline. At first (top side) there was 00;00;59;29. Next frame (middle) has time 00;00;01;02 and last one (bottom) has time 00;00;01;03So I think that frames 00;00;01;00 and 00;00;01;01 are missing.Windows 7 PRO + Premiere Elements 14Have I done something wrong with settings or elsewhere?

With two bubble levels on my gear I believed the one on the tripod  and not the one on the fluid head (first time for this new head) and it was wrong. My two hour video is tilted to the left. Is there any way to level streaming video in PE13 or other version?Thanks!

I recorded a video with my laptop (it's a Lenovo ideapad 320) and imported it into Adobe Premiere Elements.  When I play the video in the computer's movie player or in Windows Media there's nothing wrong with it.  As soon as it's in Adobe Premiere Elements, the sound and the pictures get out of sync.  The sound track and the pictures weren't recorded separately.  Sometimes, without any exaggeration, it can be three or four minutes between the sound and the picture. 

Hi,I have just installed a new C drive. Had to reinstall all my programs inc Premier Elements 15. I have tried to open an existing project which I was part way through editting. When I do, I receive a message stating I need to locate certain files. I can locate these, which are still sitting on my old C drive, (I kept it as a back up). So I can find the files and point the program to them but then I receive a message stating that the 'file is not suported or the required codec not installed'. Can anyone assist? It makes no sense as the project was part way edited so these files have been used by Elements before. Can I simply move these files to the a new location on the new C drive? Any asistance appreciated.Thanks - Brian

Hi,after formatting my hard drive I had to reinstall all my software. Some years ago I purchased and downloaded Premier Elements 13 and I still have the file Setup which I downloaded at the moment of purchase. When I click to install it goes OK, then I write my Serial Number, but then I'm asked to insert a CD which I don't have and I never had. So the installation stops.Please, anybody knows how to proceed? I have the Serial Number written in my account, should I have also a CD?  I don't understand this.Thank you very much for your help!Best Regards.Tom

Whenever I work on a project I usually am setting In and Out markers along the way and rendering different sections.Once rendered these sections obviously stay selected, thus whenever I am working on something further down the timeline and I miss-press delete, the whole prerendered sections get deleted.It's even more annoying when your far enough down the timeline and you don't realise this has happened because you cant see it.You cant just Ctrl+Z to get it back because you will lose everything you just worked on.Plus when working on big projects, if I delete a huge edited section of the timeline and then Ctrl+Z to get it back, it lags out my whole computer, crashes and then I've lost everything since my last save.I don't know if this is a common problem among users or whether its just me and a weird setting I have enabled, but it seems far too annoying for people to just ignore.Does anyone have a solution for me?