Questions

I have a Ryzen 9 3900XT processor and 32GB memory. I have been using Elements 15 but now I need to embrace H265 all the time. Will this processor be ok with the new Elements 2026?

Hello! I am new to video and video editing. I have seen a similar question in the forums, but I do not understand any of the terminology given to solve the problem. Novice here!I am near the end of editing (actually re-editing) my first video project. The first time around, I downloaded (imported?) the video clips just fine, and everything edited perfectly except for one clip that lost audio halfway through. What's up with that?This time, all the clips are downloaded/imported just fine, I am near the end of the project, and the last two clips went blackscreen after being cut. The master is fine, they went onto the timeline fine, and after being trimmed the video itself disappeared and only the audio is available. What's up with that?Please help by using little words. 'Explain it to me like I'm a two-year old' (Denzel Washington, "Philadelphia"). A two-year old without a smart phone!Thanks!!

 I have Adobe Elements 2021; however, for the past few weeks, I have only been able to use the program in the trial version. I have reinstalled the product, but the problem persists. I purchased the Adobe Elements program with a serial number.

I'm using Premiere Elements 2026 on Windows 11 in Advanced mode. I want to use the Music Remix feature to extend and auto mix a music clip to match my video length.The problem: I cannot find the Music or Soundtrack track anywhere in my timeline. I only see Video 1-3 and Audio 1-4. I've scrolled down — no Soundtrack track exists below the audio tracks.When I drag a music file to the timeline it only goes to regular Audio tracks (Audio 3, 4, 5, etc.) and does not show remix handles — only regular trim handles.How do I get the Music/Soundtrack track to appear in Premiere Elements 2026 so I can use auto Remix?  I have tried my bot and no help there either

have been using Adobe Premiere Elements 2025 for a while with no issues. I now cannot put a clip on to edit with the video and audio linked. I’ve used the ‘unlink’ in the past and it is nothing connected to that as the menu will not give me the option to ‘link’. Any ideas on how to fix this would be great as it is doing my head in trying to exactly match the cut on video and again on audio. Only thing that works as one is the ripple delete - even if I try to move a clip manually, I have to move video and then go back to move audio as they will not link up in any way! PLEASE HELP

I just purchased 2026 Photoshop Elements and Premiere Elements bundle. I can create a video and export it to a Media file or to a number of social media sites but I cannot find a way to burn a DVD or create a DVD .iso file from the video I have created.  I have reviewed numer of posting showing a pull down on the "Export & Share" button on the upper right portion of the editor display.  On my version there is not a pull down indication.  The only option is to press the button.  Afterward a window on the left side of the display opens with an option to save a media  file or to export the video to a number of social media sites. Additonally I don't seem to have a way to create a DVD menus or to edit Book Marks although I can create them.I have installed copies several time and on several computers with the same results. Anyone have any ideas?

I want to share a very frustrating experience I had with v2026. Upon installation Premiere Elements and/or Microsoft evidently reset defaults… one of which was .mp4 files to Premiere Elements. Whenever I exported a movie and attempted to play it back, all it did was reload the project file, even though it said it was a .mp4 file. Finally, I went into Microsoft ‘default’ settings and reset .mp4 to a different program (in my case I selected media classic player) and all of a sudden the file played as a normal video file. Wow, how frustrating until I figured it out. Hopefully this might save someone else some frustration.Barry

I'm having trouble reactivating Premiere Elements 2020 after my PC crashed. I can't log out of my old PC (continuous BSOD).During activation, I get a message that there are too many activations.The agent said he can't help me.How do I reactivate the software?The product is visible in my software list in my Adobe account.Jacek

Hi, I’m a Newbie!!!!I'm getting an error message about “Sequence Settings Mismatch” in Premiere Elements 2026. This only happens as I’m working on a video a friend sent me. Most of the articles/videos I find about the best way to fix it only apply to Pro, not Elements. Any suggestions?

When I apply default (cross dissolve) transition to all clips on the timeline, APE applies a “transition” to the beginning of the first clip. Since there is nothing to transition from, APE installs a fade-in on the first clip.. (And a fade-out on the last clip.) My question is, why wouldn’t Adobe apply a transition only at the intersection of 2 clips? That would make more sense. After all, it’s not a transition of there’s nothing to transition to or from. I doubt that anybody really wants that fade-in/out along with transitions.. If we want fade-in/out, we can install them ourselves. It’s up to us, not APE to decide that. I know there are a couple ways to work around the issue, but Adobe should fix that in the next generation.

Running Elements 2026.1.  I have a client that creates MOGRT files in AE & until recently I was able to open them in Elements but now I can't.  I get error: "This motion graphics template is not compatible with this version of Premiere Elements."

I’ve captured some 4K HDR videos using my GoPro 12.  When playing the video in Windows, everything looks normal.  Also, when playing the clip within Premiere Elements Project Asset, it looks fine.   After adding it to the timeline and render, the color of the clip in preview looks strange.  See attachment.  The blue sky turns black.  Any assistance with this issue would be appreciated.Clip properties:Type:  MPEG Movie Frame Rate: 59.94 Color Space:  Rec 709 Color Space Override Off Video Codec Type HEVC 10 bit 4:2:0  

Nothing more to describe actually!

when im editing my videos in premiere elements 21 its impossible to do anything becauyse if i try to playback the videos in my timeline it lags so bad that it shows 1 frame every 20 seconds. any fix?

I have installed Premiere Elements and entered my serial number. I get an error that the software is already activated. I no longer have the computer that Premiere was installed on. I did not deactivate Premiere on the old computer before I disposed of it.Is there a way to deactivate the old installation so that I can install Premiere on the new computer?

Bonjour Lorsque j’ajoute mon fichier mp4 pour faire le montage de ma vidéo j’ai uniquement le son qui apparait. Je n’ai aucune image cependant lorsque je regarde ma vidéo dans le lecteur multimedia de mon ordinateur tout est là. Comme résoudre mon problème ? Merci

Hi,just recently bought Premiere Elements 2026 but I have huge issues on Windows 11. When importing 4K/50 videos from GoPro (25 videos) into Premiere Elements, I got 1st huge issues with generating Peak files. It sometime hangs and Premiere is restarting. If I overcome this by importing one file at a time, my timeline starting to be constantly frozen, when I open project media browser, I usually got freeze of Premiere, amount of RAM used by Premiere is going into values like 30 - 40 GB (I have 64GB RAM) and then app crashes leaving huge dump file (like 40GB) in the AppData folder. Switching nVIDIA support not helps. I have check on 2025 version trial, and no issue at all. Also there are no issues on Mac with 2026 version…. Any idea what is happening with Windows version of 2026 and what can I do with this issue?

Good morning!After installing Premier Elements 2021 on a new PC I found out that I reached the limited number of activations/installations (even being signed out from old computer) - that seems like a smart marketing move by the company to get rid of old-timers, who do not want to get hooked on subscriptions.Ok, so now I am using subscription type Premier Elements 2026 (3 year subscription for $80). When I do the Export of the project and timeline has a customer logo “imposed” for 1 second, the whole frame gets a hase over and lightens up a bit. Which is quite annoying “improvement” - the video rolls, my model talks and as soon as logo appears in the corner of the screen, the whole frame lightens up. Internet suggests that I change the “export” settings - from Hardware accelerated encoding to Software accelerated encoding. Well, Software encoding works better with imposed customer logo, no haze added to the frame, good. But in other parts of the exported movie model talking mouth becom

I stated all the details already.

What settings do i best use to export a movie (montageen render in premiere elements 2026) to a USB or external HD to send this movie to a projector via a laptop?

Hello, I am unable to see my scanner in Elements 2026.  When I select File/Import I only see WIA Support.  I have checked WIA and it is running and I see both scanners.  If I select WIA support, it freezes up completely and I have to manually stop running the program from task manager.  I am running Windows 11

I’m trying to adapt to Premier Elements 2025, after using prior versions (2021 as the latest) for years. Biggest single problem is, I simply cannot find convenient one-frame-forward or one-frame-back controls. In prior versions, there was a simple button, for each of those commands, which would then allow me to use a cut command at exactly the frame I wanted. In the 2025 version, all I can figure out is, keep expanding, and expanding, and expanding the timeline, until I can use my mouse to create what looks like only a single-frame jump at a time. If anyone can help me find a better way to get single-frame resolution, before I cut/trim a video segment, I would be very grateful.

I’ve been using P-Elements for years, and was comfortable with the 2021 version, but that version cannot handle HEVC h.265 files. So, I upgraded to the 2025 version, but that interface is just so, so totally different, I cannot use it comfortably, or efficiently, and since I’m just an occasional hobbyist who doesn’t do this often, I have found it deeply frustrating, and discouraging, to try to learn a completely new and different interface -- especially since I cannot find any way to move forward or backward by a single frame, before I trim a video (I created a separate post, to try to address that problem).My question is, if I buy the 2022, or 2023, or 2024 version of Premier Elements, will it be able to handle HEVC h.265 files, while letting me continue to use an interface which is at least similar to the 2021 version?Or, can anyone give me a complete step-by-step version of where to find (I’m hoping someone can offer an exact link, rather than just some name that I would need to beg

The floating timeline is not working in adobe premiere elements 2026, also after adobe service support said that the problem is solved and the case closed, the problem is stil there, also after the new update.

I've been using 2021 Premier Elements for years, now trying Elements 2025, want to get newly saved mp4(2025) files to match parameters of older mp4(2021) files, close enough for high-speed lossless merging in Bandicut. I've matched frame size, frame rate, keyframe rate, and audio traits; and, I’ve tried both Constant Bitrate, and Variable Bitrate. But, none of those have been good enough for Bandicut, which keeps saying, “no, if you want to merge those two mp4 files together, you will have to use slow frame-by-frame encoding, and that will be lossy.” How many more parameters do I need to align, and what are they? I’m using a Windows 10 system, to create 1080p files, with a target bitrate of 11 Mbps.